Thanks for doing this! Just finished my conversation and cruise control was the last item on my list. Followed your instructions and it works perfectly!
@werkstatte-bmwonly9515
Жыл бұрын
Glad it worked out. Thanks for the feedback
@americanautocare6244
4 жыл бұрын
NICE WORK GUYS. AWESOME VIDEO
@hiteshg24
2 жыл бұрын
Massive probs guys! I really really appreciate your efforts on this video and guidance. I converted my car two years ago without this working. I followed the wiring and boom it finally works!! The rev lights not working when car is revved, any suggestions? Thank again guys!
@werkstatte-bmwonly9515
2 жыл бұрын
Rev right was an option only for SMG cars. But you can find a tuning company that can code it. It's doable.
@Snoowd
6 ай бұрын
I had the conversion done on my car.... And my Rev lights work@@werkstatte-bmwonly9515
@Ineed2fabb
4 ай бұрын
Yes thank you this video is so well done you are one hell of a smart guy thanks so much for this swap info...i have an e46 04 m3 smg just finished now the wiring, thanks...
@james1kush
3 жыл бұрын
Can u guys make a video on the smg~>manual cluster wire u need to make pdc sensors work please
@werkstatte-bmwonly9515
3 жыл бұрын
That's a simple one. I believe I have an e46 smg in the shop. Give me couple of days. Please subscribe and share the video once we are done with it.
@steedabjb
3 жыл бұрын
I would like this, too. I know it involves a single wire behind the dash but my PDC and mirror tilt doesn't took after my swap. Subscribing. Good vid
@werkstatte-bmwonly9515
3 жыл бұрын
Yes, I'll make the video. It's pretty simple but when you read forums it's very confusing.
@james1kush
3 жыл бұрын
BMW ONLY shared ur guys video on the Facebook forum my cars already all swapped but ur video is definitely solid a MUST WATCH only step left is the pdc wire thanks again
@werkstatte-bmwonly9515
3 жыл бұрын
I promise I'll have it done.
@xDarkanek
3 жыл бұрын
Do i Have to update a manual soft dme to m54b30?
@werkstatte-bmwonly9515
3 жыл бұрын
I don't think so. Just change the coding setting in the ews to manual. As long as your cruise control works and you don't have a power decrease you'll be fine.
@autocraft6438
3 жыл бұрын
Hi i swap manuel BMW e 46 325i,but the throld gaz accelaretion don't work.why Can i do it?
@werkstatte-bmwonly9515
3 жыл бұрын
Did you program your dme to manual and unplug the EGS module ?
@sonnykaledi9278
2 жыл бұрын
Hi Victor. I thank you so much for the video. So useful and helpful 👌. I bought an E34 540i of 1994 which was automatic, found it converted into manual. Can this be done,to get cruise control to work? Thank you for the anticipated response 🙏.
@werkstatte-bmwonly9515
2 жыл бұрын
I'd have to look into wiring diagrams but it's difficult without seeing what's been done on the vehicle without tracking every step. Find a BMW specialized shop and let them check it.
@sonnykaledi9278
2 жыл бұрын
@@werkstatte-bmwonly9515 Am a huge fan of your work. Yhsnks for yhe advice.
@werkstatte-bmwonly9515
2 жыл бұрын
Thank you 😊
@james1kush
3 жыл бұрын
Hey guys did u guys ever upload a vid of the pdc wire behind the cluster?
@werkstatte-bmwonly9515
3 жыл бұрын
Hello James. I had to quarantine for two weeks and just got back to work. It's on my schedule for this week. Sorry for delay
@NexTyNo1
3 жыл бұрын
@@werkstatte-bmwonly9515 still nothing?
@werkstatte-bmwonly9515
3 жыл бұрын
This week. We had two videos or the rob bearings side by side and we are starting another amg to manual swap. Sorry we didn't have cars to do the job on. It's not something we do daily. Apologize for the delay
@werkstatte-bmwonly9515
3 жыл бұрын
We uploaded the PDC wire video, it's up but it came out do dark. We redid it last week and will post is as soon as they finish editing it.
@UGAexploder
Жыл бұрын
The gear selector switch was not hanging down already. How would I go about finding this plug? Thank you!
@werkstatte-bmwonly9515
Жыл бұрын
Hi, not sure which part you're referring to.
@keshav4324
3 жыл бұрын
Do you have an idea about m47 to m54 swap? Would it be easy?
@werkstatte-bmwonly9515
3 жыл бұрын
Diesel to petrol? It would be easier to buy two cars. Everything will be different. Fuel delivery system. All the wiring. I'd never do it.
@MB-yg7om
3 жыл бұрын
Would it be the same process for the ssg (smg1) gearbox fitted in some e46 325i?
@werkstatte-bmwonly9515
3 жыл бұрын
I'd have to look into wiring. It could be pretty similar.
@werkstatte-bmwonly9515
3 жыл бұрын
I'd have to check the wiring diagram but it could be very similar.
@jakesprojects1978
3 жыл бұрын
@@werkstatte-bmwonly9515 I would like to know that too. I also have a e46 325. Im installing the standard manual transmission for the car (Getrag S5D 250G). I believe it only has a reverse sensor. Please let me know. Thanks in advance.
@werkstatte-bmwonly9515
3 жыл бұрын
From sensors manual transmission only have the reverse light. Smg had oil level, temperature but the manual doesn't have anything but a reverse light.
@jakesprojects1978
3 жыл бұрын
@@werkstatte-bmwonly9515 So there is no way of making the cruise control work? Or does it work a different way? I have seen a video of automatic to manual swap and they connected the reverse sensor/light to a brown/black wire from the location of the Salmon smg relay only this whas a blue relay. Thanks for your quick response!
@techgeek2994
3 жыл бұрын
do i need to program dme if i do swap on my bmw e63 630i with ssg(smg1) transmission. I want to get rid of it and to put manual transmission in the car. I know to do all coding and to change veichle order but i dont know how to change dme msv70 software in winkpf . Only option there that i can see is to update dme not to really change dme software number? my current dme zb number is 7581256 which corresponds to BMW 6 SERIES E63/E64 630i 3.0L L6 24V 200kW/268HP MSV70 SIEMENS MSV70 7577968 7581255 7581256
@werkstatte-bmwonly9515
3 жыл бұрын
Yes, it's more then coding. You would have to flush it at least or replace it. You'd have to see if the part number is the same for manual and smg models. If it's different then you'd have to replace it. I'm not familiar with winkpf. We use Autologic that has conversion set up in the system already or Wizard. I prefer wizard because you can pick the software number manually, change VO and code modules individually or all at once. Besides that we use ISTA and Autohex. Those are four of my favorite tools.
@techgeek2994
3 жыл бұрын
@@werkstatte-bmwonly9515 as far as i can see there is no diffrence in dme for e63 630i smg and non smg so that means i dont need to touch dme just to code out smg out of the car ?
@werkstatte-bmwonly9515
3 жыл бұрын
Code and flush the dme. Coding would be in modules like instrument cluster,light module, general module, ews or in your case would be CAS. But the DME would have to be flushed first then coded. If you have flush files available let me know the numbers and I'll check witch one is for manual transmission.
Пікірлер: 46