Don't need to get under for the middle of the drive shaft. Just take off the passenger side plastic like u would for an oil change and it's right there to grease.
@EscapePowerSports
5 жыл бұрын
Hell yeah, I was thinking that might be the case after I posted the video. Thank you for sharing as it'll definitely save some guys some time, now I guess there's no excuse not to just grease it when changing the oil. Thanks for watching and taking the time to comment with this helpful tip. Cheers
@mattbuchan2125
4 жыл бұрын
Danny your videos are awesome, extremely informative and the perfect length. ***There is one more grease fitting. It is on a u-joint at the rear of motor right behind the gear box oil plugs. It is only accessible by removing the same plastics as did for the gear box oil change. You cannot access it from underneath. It is by far the hardest to grease in my opinion. Thanks again for making these videos. Keep up the great work.
@EscapePowerSports
4 жыл бұрын
Thanks for the kind words. Now that is some great information, hopefully other viewers will join me in liking this comment to ensure it stays towards the top, for all to see. Thank you for watching and especially for taking the time to add additional information on a grease fitting I completely missed down here in the comments. I currently don't have any commanders to go lay eyes on that one myself, but I'm sure others can see this and comment that there machines also have the same fitting on their machines. Thanks for watching and for taking the time to leave additional info down here in the comments, I definitely think as this channel grows the comment section will be a wealth of information that might exceed the info provided in the videos so thank you for being an early contributor to that. Cheers
@lska7853
3 ай бұрын
You for got to mention the rear shocks top and bottom that have bearing in the middle of the rubber bushing. That is where my steak is coming from. Thanks for posting.
@jacquelinechiasson1757
Жыл бұрын
Nice straight forward , well paced video. Thanks very helpful.
@EscapePowerSports
Жыл бұрын
glad it was helpful for you. I appreciate you watching and taking the time to leave this nice feedback in the comments. Cheers
@MrRickyb1991
6 ай бұрын
really appreciate all of your commander DIY maintenance videos, they are a massive help to me as a new owner of a older model that I want to complete all standard maintenance on myself, you couldn't have made them any easier to understand and follow along to
@ronniebowles5826
4 жыл бұрын
The video was awesome!! I did discover that I could access the 2 grease fittings under the skid plate without removing the skid plate by simply removing the plastic on passenger side from the inside of cab. I discovered this.as I was changing the oil which gave me easy access...They were very easy to get to... hope this is helpful! Thanks again guys!
@EscapePowerSports
4 жыл бұрын
definitely helpful, and next time I get a commander around here, I will definitely be doing it that way with the oil change. Really appreciate you taking the time to share this time/hassle saving tip with all of us. Thanks for watching and taking the time to leave a comment. Cheers
@KingCommander1000
4 жыл бұрын
Thanks for the video man. Your Commander service videos are great! Those middle u-joints are a pain in the ass to grease. You can also get to them from above when changing the oil.
@EscapePowerSports
4 жыл бұрын
no problem, and that's great news. Thank you for sharing that time saving tip with everyone, really like how the comment section is becoming an expanded source of good information for these videos. Thanks for watching, cheers.
@chadlarsen5823
5 жыл бұрын
You Sir are doing my style KZitem videos! The pace/speed 2 thumbs up
@EscapePowerSports
5 жыл бұрын
Hell yeah, thank you for the kind words. Cheers
@albertofino1
Жыл бұрын
And! I used your videos to pull grease, oil, filter, diff’s and tranny oil change on my Commander. Awesome down to earth videos without a bunch of unnecessary rambling on of bullshit. To the point!
@EscapePowerSports
Жыл бұрын
that is the goal of these videos, appreciate you watching and taking the time to leave some good feedback in the comments. Cheers
@Framlife351
5 жыл бұрын
This channel is exactly what I was looking for to service my 2015! 🤘
@EscapePowerSports
5 жыл бұрын
hell yeah, glad your finding some of the videos helpful. Thanks for watching and taking the time to leave a comment. Cheers
@Framlife351
5 жыл бұрын
@@EscapePowerSports 🍻🍻🔧
@boffin6969
4 жыл бұрын
Love the beer job time meter!!! 👍🍻 Thanks for the info!
@EscapePowerSports
4 жыл бұрын
Cheers, always seemed like the logical way to measure a tedious maintenance job to me. Thanks for watching, and taking the time to leave a comment 🍻
@toddmasterson7245
7 ай бұрын
Your videos are awesome, very informative, and love the how many beers to complete each job.
@hoyt15flhtk82
2 ай бұрын
How about a video on replacing the starter and one way bearing on a 2011 Commander 1000. Or years similar. Ive only found replacing the starter on a 1000 Outlander and hoping they aren't the same. Awesome grease video, i definitely learned something. I just purchased my 11 Commander from Family with 1500 miles and 240hrs. So i have alot to learn in a short time. The machine starts fine when its at air temperature. But when it warms up starter barely turns over. Yes the battery is fine at 12.8v and I load tested battery, was very good. Thanks Curt L.
@michaelmiller2833
5 жыл бұрын
Hi Danny. Thanks for the very informative video. I own a Commander too so your videos are saving me money. I would love to see a video on how to install a 2.5” bolt on lift kit. Thanks
@EscapePowerSports
5 жыл бұрын
hi, thank you. Saving you time, money, or frustrations is the goal for these videos, so that's great to hear. Thank you for the video suggestion and we will definitely add that one to our list for this commander series. This machine should be done this week, but maybe we'll put one on the next commander we get in. Thanks for watching and taking the time to comment with a video suggestion. Cheers.
@FunkMasterJunk
3 жыл бұрын
Thx man! I have the shop manual and couldnt find all the grease nipples. Cheers! Another great video. BTW 2015 XT only one nipple on the front U joint.
@EscapePowerSports
3 жыл бұрын
glad it was helpful for you, thanks for keeping adding info on the u-joint style for your machine. Appreciate you watching and taking the time to share your experience with the job in the comments. Cheers
@albertofino1
Жыл бұрын
I found greasing the nipple in the middle u joint of the commander was super easy when I was changing the oil
@EscapePowerSports
Жыл бұрын
ahh yes, in hindsight it is much easier to get to from the top. Appreciate you watching and taking the time to share this helpful tip in the comments. Cheers
@KevinMcWhorter
4 ай бұрын
My 2019 had the 3 on each side in the front. There wasn’t one on the front drive line. There was one on a u-joint about where your feet are under a skid plate. There were none above the skid plate back from there. Under the last skid plate there were 2 on the u-joints before the differential. So that is 9 total for my 2019.
@smeader5
4 жыл бұрын
Great videos! You have to do one on changing out spark plugs on a commander 800.
@EscapePowerSports
4 жыл бұрын
Thanks so much, sorry for late response, and I'll definitely be adding spark plugs to our list of videos to make next time we get another commander around here. thanks for watching and I really appreciate you taking the time to leave a comment with a video suggestion. Cheers
@marctaft3661
4 жыл бұрын
Thanks man. Really appreciate your informative vids.
@EscapePowerSports
4 жыл бұрын
no problem, thank you for watching them and taking the time to leave a comment. Cheers
@scotttimmons7532
5 жыл бұрын
Like always, great video Danny! Suggestion for future jobs and beers...lift, tie rods
@EscapePowerSports
5 жыл бұрын
thanks, and we'll hell yeah thanks for the video suggestion, will definitely keep those in mind. Cheers
@rtp3962
4 жыл бұрын
I like your style young man. I can make it a 5 beer job easy
@EscapePowerSports
4 жыл бұрын
thank you, and it definitely can take as many or as few beers as you'd like haha, be safe, and thanks for watching and taking the time to leave a comment, Cheers
@raydefreese8993
2 жыл бұрын
I appreciate this video help me out a lot thank you
@EscapePowerSports
2 жыл бұрын
No problem, glad it was helpful for you. I appreciate you watching and taking the time to leave a comment. Cheers
@davidwright4361
Жыл бұрын
You can pull the cover off on the passenger side to get to that middle grease fitting. It's a lot easier in my opinion.
@RETROGEMBOUTIQUE
4 жыл бұрын
THANK YOU FOR THIS VIDEO!!!! 2015 Cam Am Commander Limited
@EscapePowerSports
4 жыл бұрын
no problem, glad it was helpful for you. Thanks for watching and taking the time to leave a comment, Cheers
@nemobaranyi6810
4 жыл бұрын
Thank Danny great job ! You deserve a beer ! Cheers
@EscapePowerSports
4 жыл бұрын
Appreciate that, enjoying one currently. Cheers
@rockymountainfinishing466
3 жыл бұрын
Great video bud...informative and funny...keep up the good work...happy trails
@EscapePowerSports
3 жыл бұрын
thanks, glad you enjoyed it. appreciate you watching it and taking the time to leave a comment. Cheers
@raffaeleteti4874
5 жыл бұрын
Hi Danny, your videos help me a lot! thank you very much from Italy
@EscapePowerSports
5 жыл бұрын
Hi, no problem, that's definitely the goal with these videos. I'm glad you found some of the videos helpful. Thank you for watching and taking the time to leave a comment. Cheers
@CaribbeanSimPilot
5 жыл бұрын
Great info. This is only a 1 bourbon job. 😀🥃
@EscapePowerSports
5 жыл бұрын
hell yeah, unless the grease guns out and the bikes filthy then it might take two. Cheers
@jimsmith7223
2 жыл бұрын
I have a 2015 can-Am Commander max 1000 4 seater. Was wondering if you had a video on changing out the stater?
@EscapePowerSports
Жыл бұрын
unfortunately I don't but if I ever get one that needs it swapped out I will be sure to grab the camera before I do it. Service manuals are a huge help for technical jobs like that. Hope this helps and I appreciate you watching and taking the time to leave a good video suggestion in the comments. Cheers
@swede5209
3 жыл бұрын
I just bought a Commander Max XT and I have been searching for grease fittings all over. I also replaced all the brakes mostly cause the pads and rotors were pretty wore out, but also cause they squeak. Everything is new and they still squeak.
@EscapePowerSports
3 жыл бұрын
The service manual should help find all the grease fittings on that max and I'm not sure if they happen to have the same suspension set-up as the maverick max, but if so here's a link to a video I did on greasing a maverick max: kzitem.info/news/bejne/2m2crKyBm2logqQ As far as the brakes go, not really sure why they are still squeaking if they arn't wet? maybe a caliper is getting sticky? Either way congrats on the new machine and I appreciate you watching and taking the time to share your experience in the comments. Cheers
@robertburhans924
18 күн бұрын
you forgot the ones on steering shaft.
@anotherbrickonthewall
3 жыл бұрын
On the grease gun, when the rod doesn't go back in, pull it out against the spring tension slightly and twist the T-handle a 1/4, and push in back in. I'm not sure exactly the mechanicals of it, but pull it, twist it and it will slide right in at the perfect spot.
@EscapePowerSports
3 жыл бұрын
hell yes, thank you very much for taking the time to share a detailed description of how to make that work, That's what I'm starting to love about these vids is that I actually end up learning more from the comments than I did making them. Thanks for watching and taking the time to share that bit of info, Cheers
@anotherbrickonthewall
3 жыл бұрын
@@EscapePowerSports I'm just getting into some maintenence of my 2017 Outty 650 and I am enjoying your videos and some of the comments and your cordial replies to them. I'm at 47 hrs now. I changed the oil at 10 hrs. That was couple years ago, so time to do it again. I wanna check all the boxes too. Do you know any good service manual download sites? I saw one video where the guy mentioned the rear box is supposed to be slightly lower than the fill hole. Is that true? You think I should drop the gear oil now or just check it?
@arielmgmendoza1
4 жыл бұрын
Excelentes videos!!!! me ayudaron mucho!!! tenes algun video de cuidados para la correa de transmision? saludos
@EscapePowerSports
4 жыл бұрын
gracias, no tengo un video de la correa de transmisión, pero lo agregaré a nuestra lista de videos para hacer. Buena idea. Gracias por mirar y tomarse el tiempo para dejar una sugerencia de video en los comentarios. Salud hope google translate got the message close, Cheers
@markflush5406
Жыл бұрын
Thanks because I can't trust the powersports and UTV stores in my St Louis area to actually do the work that I would pay them to do... Unfortunately I need to watch these videos and do it myself because I can't trust them to do the work
@EscapePowerSports
Жыл бұрын
ahh that's unfortunate, glad the videos are helpful in that regard and I appreciate you watching and taking the time to leave a comment. Cheers
@sc131000
2 жыл бұрын
Are you lubing up the power steering connectors? If so do you have a video on that as well?
@EscapePowerSports
Жыл бұрын
I am not, but certainly will add that to the video list for the next time I get a commander. Appreciate you watching and taking the time to leave a good video suggestion in the comments.
@troyormann723
2 жыл бұрын
My 2017 doesn’t have a grease nibble on the front u joint
@EscapePowerSports
2 жыл бұрын
that's interesting, I appreciate you watching and taking the time to share information on how this procedure might be different for other year models. cheers
@kennybiggs3944
2 жыл бұрын
Hey man I love the channel I would like to get your suggestions on performance upgrades on a Can-Am Commander 800 RDPS
@EscapePowerSports
2 жыл бұрын
As far as raw power performance I don't typically do much in the way of modification (like the durability of stock internal engine components, just my .02), depending on the terrain a custom clutch set up can help for specific environments like rocks or hill climbs. Some must have modifications for me on these machines are a cheap winch (kzitem.info/news/bejne/t55j3pWji6qnfX4), lightbars (kzitem.info/news/bejne/sYiAqGR_fIqTgoI), and a roof (kzitem.info/news/bejne/tmiIrX2VomWaZ4o) which are more cosmetic/utility modifications than performance oriented. The correct size and pattern tire tread can drastically improve these machines capabilities in different environments as well. Sorry that doesn't really answer your question, but hope it helps. Thanks for watching and taking the time to leave a thought provoking question in the comments. Cheers
@MyInsuranceTeam
3 жыл бұрын
Great video, what apain to get the fittings off!
@EscapePowerSports
3 жыл бұрын
it sure can be, thanks for watching and taking the time to leave a comment. Cheers
@richardw818
4 жыл бұрын
How about a replace the rear dump box after you back into a tree hard? lol Yep did that this weekend on Royal Blue Trails.
@EscapePowerSports
4 жыл бұрын
haha damn, or better yet how about we make a vid of a customized steel one with boxes, hydraulic dump somehow, lights, rear, winch, and full size spare haha doesn't hurt to dream I guess, but in all seriousness sorry about the wreck and hope your back on the trails with a ready to ride rig in no time. Thanks for watching and taking the time to leave a funny comment. Cheers
@chasesherman6930
4 жыл бұрын
Looked, look again. Then I looked a third time, my 2018 commander 1000 dps does not have a grease fitting on the front joint at the diff, weird....
@EscapePowerSports
4 жыл бұрын
hmmm that is strange maybe the newer ones have different u-joints, maybe someone with the same year model will see this and comment what there's looks like up front to see if its all of them or maybe there's a chance it got replaced with an aftermarket u-joint? Either way, thank you for watching, and taking the time to share your experience with all of us in the comments. Cheers
@jean-philippecaron7846
4 жыл бұрын
2017 commander 800 XT here. No grease fitting in the front too. Thanks for the video 👍
@michaelloch8799
4 жыл бұрын
My 2017 does not have a zerk at the front U joint
@EscapePowerSports
3 жыл бұрын
hmm assuming the u-joint and front diff are original that's interesting that the newer bikes don't have a fitting up there maybe someone else with a 2017 will see this and confirm that there's doesn't either. Thanks so much for taking the time to share this info in the comments. Cheers
@rockymountainfinishing466
3 жыл бұрын
Are you using a standard grease fitting on your gun or does can am have a special size?
@EscapePowerSports
3 жыл бұрын
standard size that came on the gun, thanks for watching and taking the time to leave a question in the comments. Cheers
@RobWall1218
4 жыл бұрын
I have a 2019 commander 1000 and there is no grease fitting near the front diff. There is a fitting at the front of the engine but the zerk appears not to be for the ujoint but for the shaft itself. Grease came out the shaft. Is there something wrong?
@EscapePowerSports
4 жыл бұрын
hmmm it is definitely starting to sound like some of the newer machines do not have a grease fitting available for the font diff as far as greasing the shaft, I can't say for sure as far as the 100% proper method for greasing the shaft as I've never had one of the newer machines or a service manual for one, I probably would have just gone until I saw fresh grease. However I did have another viewer comment that the service manual does mention going until the seal bulges, but doesn't necessarily break. So a follow up grease video might be in order. Thanks for watching and sharing this valuable information for those guys watching with newer machines. Cheers
@coburna5
4 жыл бұрын
Thanks Jesus!
@EscapePowerSports
3 жыл бұрын
looks can be deceiving haha, but thanks for watching and taking the time to leave a comment, cheers
@irishcarbomb1977
3 жыл бұрын
I would be careful on mixing two different greases. If they are not compatible they can turn hard and ruin parts.
@EscapePowerSports
3 жыл бұрын
That's very good to know as I was unaware of that, Really appreciate you taking the time to share that additional knowledge in the comments and I will be keeping that in mind moving forward. Cheers
@nicholaslamb1262
4 жыл бұрын
What about the rear suspension arms?
@EscapePowerSports
4 жыл бұрын
hmm I don't believe my 2015 commander had any grease fittings in the rear suspension, but I can't say for sure on other year models. But I can double confirm that next time I pick one up. I have noticed some for the TTA 5 Link Rear Suspension set up on some Mavericks. So check this 1:57 of this video kzitem.info/news/bejne/2m2crKyBm2logqQ of greasing a maverick and see if yours looks anything like that? Thanks for watching and taking the time to leave a comment. Cheers
@marctaft3661
4 жыл бұрын
Hey Danny, have you had to change out these u joints yet? I. Working on the rear ones and can't seem to find any good help on KZitem. Any suggestions? Thank you.
@EscapePowerSports
4 жыл бұрын
unfortunately I haven't done that job so I wouldn't know any good tips for it, I can say that I've found service manuals to be life savers when attempting a repair I've never done before so I'd consider buying one. to help things go smoothly. Will add that to the list of vids to make when I get a commander that could benefit from replacing them. Thanks for watching and taking the time to leave a question in the comments, sorry I couldn't be of more help with it, good luck. Cheers
@marctaft3661
4 жыл бұрын
@@EscapePowerSports Thanks for replying man. I definitely will be getting a service manual for future work.
@ericwinslow1882
4 жыл бұрын
fuckin killer bro...come ride out in wyo
@EscapePowerSports
2 жыл бұрын
hell yeah, would like to do that sometime. Appreciate you watching and taking the time to leave a comment. Cheers
@terryg7413
5 жыл бұрын
Way too much grease you fool
@EscapePowerSports
5 жыл бұрын
haha interesting thought, didn't know there could be "to much grease", why would repacking these bushings/u-joints until it comes out be a problem?
@ckrakra2954
4 жыл бұрын
Teres no need for calling him a fool firstly. Secondly you are right about it being a little much grease. Technically you don't want to break that seal and force grease out you want to pump just enough grease in that you see the seals slightly buldge. That's every automotive service manual ever, however it rarely works that way and you'll almost always have grease escaping. After wet rides or washing I think you're better off to push that water out even if you're breaking a seal.
@maritimegoalie
4 жыл бұрын
Actually one of the reasons you grease is too force any water out of the ujoint so you definitely break the seal...
@ckrakra2954
4 жыл бұрын
@@maritimegoalie I concur. Manuals say one thing but in our world something else happens.
@EscapePowerSports
4 жыл бұрын
@@ckrakra2954 I have recently started using service manuals as I've started attempting more serious jobs, at the time of the video basic maintenance was the majority of my mechanical skill set. Since attempting more serious jobs recently I now know how great manuals are and will be using the manufacturers service manual for every job we film. I'd generally say who are we to question the manufacturers recommendation for the equipment they designed, engineered, and manufactured so there might be an updated video coming in the future where we address or at least acknowledge all of the manufacturers suggestions on servicing their equipment. But that is a good thought about pushing out the water so its hard to say. This is how I've always done it, but when a superior method or more correct way comes along I'm all game for it. This isn't the first time I've learned something I had no idea about in the comment, and I'm glad Terry G brought it up. Thanks for watching and taking the time to share valuable information and constructive feedback in the comments. Cheers
@bradybenton67
Жыл бұрын
Thanks ALOT dude ,is the there a different grease prosedure for the xmr 2023 commander🇨🇦great video ,very helpful THANKS
Пікірлер: 102