This is a great message. Err on the side of caution. Period. Electricity is under no obligation to do what you think/want it to do. Grounding and bonding ensures that electricity has no other choice than to go to the safest place. Safe electrical practices reduce the risk of accidents, injury, and death. Keep doing the right thing!
@MountaineerOutdoors
Жыл бұрын
Amen great comment
@cdnpicker
11 ай бұрын
Glad that you mentioned that they don’t have to be green. I’m in Canada, any devices I buy have green grounds but the boxes I’ve bought whether for devices or junctions all have raised grounds complete with screws but they aren’t green. Thank you for sharing your expertise.
@MountaineerOutdoors
10 ай бұрын
My pleasure thanks for watching and commenting ☺
@ricslick
2 жыл бұрын
Currently working on a DIY project. This gave me peace of mind as I was just second guessing if I was going overkill on the boxes I’m setting up.
@MountaineerOutdoors
2 жыл бұрын
Good luck with your project and glad that this helped you
@chrisdaniel1339
Ай бұрын
At 5:00 if you are overlapping the wire when going around the ground screw it is not code compliant. 2011 NECH et al. Exhibit 110.14.(diagrams), overlapping is not permitted.
@MountaineerOutdoors
Ай бұрын
It most certainly is code compliant. Might need to check that again
@chrisdaniel1339
Ай бұрын
@@MountaineerOutdoors Go online and search for the exhibits(pictures) I specified and you will see.
@donl1410
2 жыл бұрын
Actually using a pigtail to bond the box, as you demonstrated is the only code compliant method of bonding the box. 250.148 (C) Metal Boxes. A connection used for no other purpose shall be made between the metal box and the equipment grounding conductor(s) in accordance with 250.8.
@MountaineerOutdoors
2 жыл бұрын
Exactly
@BenGates101
Жыл бұрын
@@MountaineerOutdoors I didn’t know that either. Went back and added pigtails to three other boxes I had already installed
@acbeaumo
8 ай бұрын
Wrapping the ground screw, or any screw attached to the box is perfectly fine. However, I would caution against wrapping it all the way around so that the ground wire overlaps itself underneath the screw. If you do this and over-torque the screw, the wire can actually break off, which is no bueno.
@MountaineerOutdoors
7 ай бұрын
Amen
@hyk4335
2 жыл бұрын
Hi, thanks for the video! It is really helpful. I have a one question for you. I am trying to install a dryer outlet and I know I need 10-3 nm-b wire for that. I also want to use a metal box so I'm going to ground the box like you showed. but I am curious if I can use 12 AWG Solid Grounding Pigtails with Screws from Home depot. is it okay join the ground wire from 10-3 nm-b wire with 12 awg grounding pigtail?
@MountaineerOutdoors
2 жыл бұрын
I believe that the code reads that you have to stick with the same size wire that you pull for the feeders. You can use a fork terminal to go under the screw. It would be a yellow fork terminal.
@HillsideAcres
2 жыл бұрын
In the new barn build i bought the pre made pig tails with the ground screw, was nice to have them all made up and save a little time while using the rented diesel lift. Also used the "greenie" cap connector that allows the bare wire to come out the tip.
@MountaineerOutdoors
2 жыл бұрын
They definitely are a great little item to use
@OGCJ10
10 ай бұрын
My house is about 25 years old.There are no ground wires only red and white inside metal conduit. First of all is this safe? Or should I run ground wire throughout which would be a PITA.
@MountaineerOutdoors
10 ай бұрын
Well back in the day, they used conduit as the ground. Not many people do now but it's still legal. I would say that at this point it's your call. My opinion, I like to have a redundant so I'd run the ground. I'm guessing though, your conduit is acting as the ground though. Make sure it's intact and maybe just use it.
@brianwarner308
8 ай бұрын
Do you err on the side of caution? Cause I couldn’t get that bit clear???
@MountaineerOutdoors
7 ай бұрын
😂 😂
@brianwarner308
7 ай бұрын
@@MountaineerOutdoors good video brother
@MountaineerOutdoors
7 ай бұрын
I appreciate it man
@rul1175
Жыл бұрын
What is the reason to ground the box instead of connecting the ground directly socket. I'm learning about electricity.
@MountaineerOutdoors
Жыл бұрын
My opinion is that if it's only the device and you take that plate off with the device then the potential for box to become energized is there. I prefer to have it fully redundant so there is slim to no chance of a shock.
@chrisdaniel1339
Ай бұрын
If the insulation on one of the hot conductors is damaged it can arc to the box or if a hot conductor touches the metal box that is properly grounded it will trip the circuit breaker. Both the switch and/or receptacle and the steel box are grounded so if there is an issue with any part of wiring/switch/receptacle in the box if done properly it should trip the breaker.
@BenGates101
Жыл бұрын
If you remove a wire out of that box how do you plug the hole?
@MountaineerOutdoors
Жыл бұрын
With a knock out plug filler like this one. Or you can use plastic ones as well amzn.to/433bKVR
@BenGates101
Жыл бұрын
@@MountaineerOutdoors perfect! Thank you! I also have a question about hardwired smoke detectors. I have to add another on on my existing circuit. Can I just add a 12-3 to anywhere in that circuit and run it to the new detector? Do they work off a three way splice?
@JorgieReyes-k9m
10 ай бұрын
california every box has to be box has to bround by code in california ground
@johncspine2787
Жыл бұрын
New light fixture..out of the wall two blacks, two whites, two bare grounds all twisted to each other and capped, light has a ground, green screw, black and white. Do you take the two twisted grounds and combine it with the fixture ground and put them all under the green screw, and toss the screw cap? Or should I let the electrician do it..? I’m impatient from a Disaster recovery company that really, really sucks at taking months to do basically just a few hours of work, and them scheduling the electrician has taken more time than anything…
@MountaineerOutdoors
Жыл бұрын
Ground everything. Don't bypass it.. Did you get it taken care of?
@johncspine2787
Жыл бұрын
@@MountaineerOutdoors nope. I detailed all the work that wasn’t done to Farmers insurance and..they are apparently giving the contractor even more money. It boggles the mind..I’m starting to look up which agencies to report insurance fraud to…
@MountaineerOutdoors
Жыл бұрын
Good luck 🤞
@chuckcoughlin3112
7 ай бұрын
how to you ground 220 to a metal box?
@MountaineerOutdoors
6 ай бұрын
I personally wouldn't want to do that. 😂 😂 No I know what you mean but it's the exact same way
@Rooster960
2 жыл бұрын
I agree 100%
@Charlie-kw9jk
2 күн бұрын
Saving money when cutting corners while breaking the code will actually cost more money in the long run!
@Rymo_009
2 жыл бұрын
Self grounding outlets
@MountaineerOutdoors
2 жыл бұрын
Definitely one way
@HoosierRallyMaster
Жыл бұрын
My extra precaution is to never use bare copper wire for pigtails. I always use green wire. Just having a bunch of springy bare wires that might be pushed against the connectors on the device makes me nervous (and I usually wrap the device with electrician's tape!).
@MountaineerOutdoors
10 ай бұрын
Nothing wrong with that.. I fully agree thanks for sharing this with us
@SwiftyisThemann
6 ай бұрын
Cheap company out of business who would have thought....
@mrniusi11
Жыл бұрын
Codes are for the lowest denominator of idiots. I'm so glad the place I live only has electrical and septic for new construction.
@MountaineerOutdoors
Жыл бұрын
Code is what you need to follow at the very minimum. Always do better than the code if you can btw where do you live
Пікірлер: 48