Thanks for making me watch a video with an advertisement rather than simply including some instructions with your product. I really appreciate how what instructions you did give flashed up on the screen for only an instant, an amounted to not much more than "be careful".
@bkhumorable770
Жыл бұрын
That helpfulness skin taker of caring for easy wiping the dust with cloth, 2 stick onto video game console, thank you and have a good day.😊
@LynxStarAuto
2 жыл бұрын
Some tips for those out there looking to install one of these. I screwed mine up and had to order another. Learn from my mistakes. Order two! You get one at half price, so if you screw up, you can fall on a back up. VS paying full price twice, and waiting for shipping twice. The hardest one to install is the face plate or the front of the unit where the disc drive is at. *Leave that one for last so you have more practice, and have developed the technique!* DO NOT peel the whole sticker off the sheet. It's too big, and will only get stuck in the wrong places. Once it sticks, you will stretch it out trying to remove it, in turn deforming it, and making it useless. Instead: peel it from the shortest edges of the rectangle maybe 3/8 inch or about 10mm off from the edge of the backing paper. Line up the edges, and then press it down and smooth it out. Little by little peel the backing paper off with one hand, and glide the palm of your other hand over the sticker. Keeping it straight and true. Occasionally stop, and inspect your work. This is the smoothest way to install creating the least amount of air bubbles. You also trap less debris as well. Once you have the sticker installed slightly wet your palm and use it to smooth out any wrinkles. Really stubborn ones can be worked out with a heat gun, but beware of the satin finishes. You can ruin those. Front plate tips: start from the top where the Xbox button is located. Take a scissor and cut the paper up the disc drive slit, stopping right where the slit ends. This will allow you to install the main body of the sticker, then go back and finish up the portion with the disc drive slot. Same tactic. Peel with one hand, and glide with the other. Once you get it nice and straight, go back and peel the backing paper on the disc drive slit. Same tactic about 3/8 of an inch, or 10mm. Once you have that portion of the sticker in place, smooth it out with your palm, and a heat gun if necessary. Patience, pride, and good luck! ✌🏽
@ZeebruhPOG
7 ай бұрын
Thanks for the advice! I got it on first try! Instead of smoothing with my hand I used a solid plastic credit card with smooth edges and was able to smooth it down perfectly. My finish on my wrap was matte so not sure if that would cause any issues with a shiny wrap but I recommend using something to smooth it down like a credit card or something similar!
@josephhall7317
2 жыл бұрын
She made it look so easy to line up
@LynxStarAuto
2 жыл бұрын
Plot twist: it's a HE with a manicure.
@001wizeman
9 ай бұрын
Wonder how well this will fit the gamesir g7 se
@ryanogrady6514
8 ай бұрын
How the hell did you do the b button when you don’t have the sticker part for that button opened yet was it sleight of hand or magic lol
Пікірлер: 9