WOW! only just came across your channel and just wow.. SUBBED!
@ratemyfuneral
Жыл бұрын
Awesome! Thank you!
@BambangSuhendra
4 жыл бұрын
Definitely fun tutorial, thank you sir
@ratemyfuneral
4 жыл бұрын
Most welcome!
@theurbanmessenger2443
3 жыл бұрын
Hi, great tutorial thank you! Can you explain shortly how I can attache the doll to the rope and make it swing organically, like you did in the Intro?
@ratemyfuneral
3 жыл бұрын
Glad you enjoyed it. Basically instead of the cylinder you use the part of your doll you want to be attached with the connector. :)
@matteuccimathilde6348
3 жыл бұрын
Hello ! Actually I am super interested in your introduction animation with the crane and the pliers ! Do you think you can make a tuto to animate a plier dropping a Metal plaque on the floor ?
@ThBonneau
2 жыл бұрын
Thanks you for this tutorial, it's very very great!!! Question : Can you destroy (with voronoi fracture) the cylinder or any object attach to the "rope" ? If it's possible, you are my savior.
@ratemyfuneral
2 жыл бұрын
You can but, exactly how would depend on what you are trying to do. I would likely use a dummy object then swap it for the voronoi object at the point of breaking.
@paulgonnelly954
Жыл бұрын
Hey, great tutorial, any chance you could do a similar one for 2023 version?
@motsregor3723
2 жыл бұрын
THANKS!!!!!!!!!!!
@dvdza
3 жыл бұрын
Thanks for the tut!, did you have any approach or tried to make a marionette system? like they did in short film "Ugly"?
@ratemyfuneral
3 жыл бұрын
That's an awesome idea, and to be honest, something I'd not thought of. I think that would work using the same method shown in the video and I will definitely have a play and see if I can do something with that in one of the future RagDoll videos! Cheers. :D
@SanguiphiliaTV
3 жыл бұрын
Hi! I'm following along with this right now and am running into some trouble. At 3:06 you're able to move your bottom Cube but mine is frozen in place. I can't seem to get it to move no matter what I do. I plan on animating both cubes eventually and the top one seems to be able to move fine, but not the bottom one. Edit: Also when using a rectangular shape it rotates a lot with the motion instead of staying facing one direction. I'm trying to figure out how to animate a ribbon that twirls around as the object it's attached to spins. Maybe this isn't a good way to do that :(
@papapetebreen
3 жыл бұрын
I think this happens if you have certain dynamics applied to the cube. I believe if you temporarily remove the dynamic tag from the cube you can then move it.
@SidharthGanguly
3 жыл бұрын
Great tutorial! How to affect an object (eg hanging chimes or bells) with wind? So that it animates in the direction of wind only.
@ratemyfuneral
3 жыл бұрын
Interesting shout! There is a wind effector in the simulation menu. Can’t remember off the top of my head but add it to the cloner, give it a bit of turbulence and I’ll bet you’ve got yourself a blowy dangly thing! 😀
@cardermedia
3 жыл бұрын
Great tutorial, although it's 9.30 in the morning and I had to neck a coffee and put you on 0.75 playback speed.
@ratemyfuneral
3 жыл бұрын
I had prolly had a few red bulls before beginning!
@filmacionesyeventosmelina6873
3 жыл бұрын
Good tutorial, but I would like to do the same with a doll as it appears in the sample. Thank you
@Mk74595
2 жыл бұрын
Is there a way to change the spline’s length after setting up everything? I need to make the spring shorter but that makes the spline too long and the bottom end begins curving to the side
@ratemyfuneral
2 жыл бұрын
Super hard to say without setting it all up, but as long as you are on frame 1 I don't see why it would be a problem to adjust the spline.
@TheDede508
3 жыл бұрын
I have a creature/monster that I made I wanted to make it's tongue hang a move outside it's mouth would I do that ?
@MrYUMProductions
3 жыл бұрын
anyone get a bunch of yellow lines and a rigid spline when adding the spline dynamics?
@ratemyfuneral
3 жыл бұрын
Not sure about that, not seen it myself?
@MrYUMProductions
3 жыл бұрын
@@ratemyfuneral Figured it out! Looks like i was adding the constraint to every single vertex, not just the ones on the end. Thanks for the great tutorial!
@MaziMax
3 жыл бұрын
@@MrYUMProductions Wooow thank you for this I had the same issue
@blackmaestropubgm898
2 жыл бұрын
bro you are verry funny boy thank you for your lesson if i can say how this
@AB-mv1mb
4 жыл бұрын
Do you think c4d needs some dynamics update?
@ratemyfuneral
4 жыл бұрын
I actually very much do! Some strange behaviour has been present since R13.
@AB-mv1mb
4 жыл бұрын
@@ratemyfuneral hope they will update it soon. I am in love with this software since i started using 4 years ago.
@55mihael
3 жыл бұрын
Great thank you, i can finally hang humans in a safe 3d environment. Thank you 😊
@FootballHD-tl9np
4 жыл бұрын
3 AM Here 😴😴😴
@myersleo2803
4 жыл бұрын
Your voice sounds different than later years.
@ratemyfuneral
4 жыл бұрын
I used to be more chilled out..... Then I had twins.
@herrpredator4307
3 жыл бұрын
soooo how the fuck can i do it with the character??????????? like in the fuckin thumbnail
@ratemyfuneral
3 жыл бұрын
Hey, it’s exactly the same method. The second object connected to the hinge joint is any of the limbs of your RagDoll character. :)
@herrpredator4307
3 жыл бұрын
@@ratemyfuneral doesnt work :)
@herrpredator4307
3 жыл бұрын
@@ratemyfuneral and how did u put a material on it?
@ratemyfuneral
3 жыл бұрын
I wish I could help, but I’m not sure what to tell you. It was exactly how I made the thumbnail. In terms of the material I unwrapped the models UVs then painted it in substance painter. Then imported the texture into the material channels. I cover all of this in other tuts on the channel if you are interested. Hope you figure it! :)
@herrpredator4307
3 жыл бұрын
@@ratemyfuneral i mean how did u put a material on the spring
Пікірлер: 50