Reactors I use: Carbon: www.marinedepot.com/partners/idevaffiliate.php?id=222&url=4180 Pellet www.marinedepot.com/partners/idevaffiliate.php?id=222&url=4181 Valves for manifold www.marinedepot.com/partners/idevaffiliate.php?id=222&url=4200 Support the channel buy using the following link to buy products at Marine Depot: www.marinedepot.com/222.html
@Carlos23reef
3 жыл бұрын
Looking good, build is coming along.
@prolificbreedaquatics
3 жыл бұрын
Thank you!
@reeferkenneth8657
3 жыл бұрын
You are doing great brother, thanks for sharing everything with us
@prolificbreedaquatics
3 жыл бұрын
No problem
@bigeizsupportgroup1427
3 жыл бұрын
Nice weekend
@prolificbreedaquatics
3 жыл бұрын
Happy Good Friday Bigeiz!
@g-reef
Жыл бұрын
Looks good 👍
@Val_Halla777
3 жыл бұрын
Fyi buddy - the printed lettering on pipe and fittings wipes right off with a little bit of acetone. Also, you can save that union by removing the pvc pipe...just need to heat it with heat gun and pull/twist it out with either Vice grips or channel lock pliers.
@prolificbreedaquatics
3 жыл бұрын
Yup I figured the lettering out the next day. The pipe I tried to heat but it’s stuck
@Val_Halla777
3 жыл бұрын
Nice. I have same ‘floating style’ reactors manifold setup. Re: using 90’s - I only avoid using them on drain lines..mainly to reduce noise. I find it’s much quieter when water sweeps using combination of 45’s or w/spa flex pvc. But perhaps sound isn’t a concern in your scenario. Cheers and keep em coming.
@moereefer
3 жыл бұрын
Looks great/ I have never glued my drains?? No pressure
@prolificbreedaquatics
3 жыл бұрын
Wish some one told me last week 😅
@mikeydee7815
3 жыл бұрын
It’s coming along,looking good but I’d rather just pay a couple grand more and just everything clean and plug and play
@prolificbreedaquatics
3 жыл бұрын
Yup...I would too ... but I wanted to make the sump area work for me
@mikeydee7815
3 жыл бұрын
@@prolificbreedaquatics it’s good for content too I guess 👍👍
@ct2368
3 жыл бұрын
Is your tank drilled? I would drill it if it's not. You've got a really nice setup, I would do that last thing so it doesn't flood. That's a lot of water to trust a siphon based overflow. You already have the drill bit and bulkheads and it would only take 15 minutes.
@prolificbreedaquatics
3 жыл бұрын
I actually have a Fiji cube set but didn’t want to commit to drill yet. We’ll see how this works out.
@ct2368
3 жыл бұрын
@@prolificbreedaquatics I have faith in your ability to make the siphon work. If you're nervous about drilling such an expensive tank, it's actually easier to drill thicker glass without it cracking. Just don't use a cheap bit, spend the cash for a good one and you'll be fine.
@Val_Halla777
3 жыл бұрын
@prolificbreed Hint: Modular Marine external overflows c/w drilling kit. Just go slow. Clamp plywood or acrylic piece to inside of glass to avoid any chipping. Trust me on this...CPR or siphon tube style overflows are a disaster waiting.
@devachapman6315
2 жыл бұрын
funny you are doing this I am thinking the same then came to YT and BAM someone doing it. great! question you prob. said some where here but what HOB overflow are you using? to bad they dont salejust the tanks anymore.
@prolificbreedaquatics
2 жыл бұрын
The dont? That’s a shame… the overflow is by skimz I bought it off of brs in clearance. If you search on aliexpress you can find something similar for cheap
@markhenke2709
2 жыл бұрын
Why MPs so close to bottom... take it is bare bottom tank but still?
@prolificbreedaquatics
2 жыл бұрын
They were falling off the glass… or work their way down if it turn on full blast. I actually don’t like them
@timmmyt101
3 жыл бұрын
clamps on lily pipes sounds like the greater leak disaster risk tbh
@prolificbreedaquatics
3 жыл бұрын
Should I run without it?
@timmmyt101
3 жыл бұрын
@@prolificbreedaquatics i would. Havent had problems on freshwater tanks at all with lily pipe leak
@prolificbreedaquatics
3 жыл бұрын
@@timmmyt101 okay this is my first time so thanks for the heads up
@thomasdelgado3874
3 жыл бұрын
Damn good work I’m going to have to get you out here to Florida so you can help do mine 😂
Пікірлер: 29