This worked like a charm for me. Only took 3 days with pb blaster. Seize was from storage. thank you!!!
@TravisTutorial
11 жыл бұрын
Thank You! My roommate's Honda Hobbit has a decomp valve, but I have never seen one on a Puch bike here in the states. I hear you on the end bearing part, the one on my first Puch took a ton of abuse two years ago when I had no idea what I was doing, 2,000 miles later the whole top end is in awesome shape still.
@Alex-lo3pz
5 жыл бұрын
If only I could find a video like this but with 4 stroke GY6 engines...
@lilman1796
3 жыл бұрын
Thanks for the video Travis ,great video, keep up the great work everyone ☆☆☆☆☆☆☆
@SDsailor7
3 жыл бұрын
So what if it's a hard seized motor? do you have to take the motor apart? anyone know? Thank you
@Can_I_Kick_It
Ай бұрын
Thank you so much for the video. I’m so happy I got mine unseized!! Now, to investigate no spark! Wish me luck!
@RealJohnyCrash
9 жыл бұрын
I wish that I had seen this video sooner, I had advanced the timing on my 1980 Sach Sundancer too far. I ran rode the bike and in the morning found that it was seized, I simply used the flywheel bolt to break it loose, it broke loose easily and seems to be alright. next time I will at least use penetrating oil sprayed into the sparkplug hole and obtain a temperature gauge. Thanks guy's!
@robstevens9667
8 жыл бұрын
Excellent! Learnt a lot from that, many thanks!
@SDsailor7
3 жыл бұрын
Wont the wood damage the top of the piston by beating on it?
@philipmikdk1766
4 жыл бұрын
When my piston is stuck i just call my stepbro. He always fix things that are stuck.
@donedelacruz
7 жыл бұрын
Sorry to ask a question so many years later, but I believe my moped engine seized after not having the right fuel oil mixture. It was ignited twice before stalling and completely dying, but is it possible to unseize or repair the issue by myself?
@kdt85
4 жыл бұрын
Did you fix it?
@lilman1796
3 жыл бұрын
Thanks for the video everone, great info on Soft seas 2 stroke s
@zx8401ztv
11 жыл бұрын
Nice tutorial :-) I did notice the decompression valve and cable had been deleted from the head, another difference between the uk and us models i suppose. The phospher bronse little end bearing can put up with a hell of a lot of pounding, unlike modern types, yes im a stick in the mud :-)
@TravisTutorial
11 жыл бұрын
Thanks You! KZitem won't let me post links in comments, but you can google: treatland 1977 mopeds moped junkyard and... The MopedArmy Buy/Sell Forum, which will be your best bet for old/original moped specific parts like sidecovers. Treatland has a great selection for "new"parts like gaskets or pullers. The moped junkyard is good too but their prices can be higher than treats or 77mopeds.
@Ricignuolo
Жыл бұрын
Well thanks !! I just unseized my moped’s engine!!
@jayceecross715
2 ай бұрын
Hey! I'm trying to do the same thing. Any tips? I'm a complete fuckin novice lol
@heldersilva5357
10 ай бұрын
Puch ist ein Anblick!
@jimsinnovations2737
5 жыл бұрын
nice man wish you had a video showing how to fix my issue!! LOL
@guilhermeaad
8 жыл бұрын
Nice tutorial! And the other ones helped me a lot. Just have a question. I'm repairing my father's 1974 Puch Maxi S and i can't turn the flywheel a full turn. The piston moves but just a bit. Any ideia what is the problem? Once again, thanks for all the tutorials. Cheers
@TravisTutorial
7 жыл бұрын
Might want to take the top end apart and check condition of the piston and rings, could be a bad bearing on the crankshaft
@guilhermeaad
7 жыл бұрын
Thanks for the tip! I'm going to check.
@rikoq
6 жыл бұрын
Thanks Man Great Vid!!!
@zx8401ztv
11 жыл бұрын
Odd isnt it how we all get slightly different versions of the same thing. On my first puch maxi 'N' type with solid back frame i had to change the little end bearing, well we had a special only puch shop that supplied the part. But one thing they dont tell you is its not a drop in part!!, you have to get an adjustable blade reamer and slowly take material out so the (gudgen pin/piston pin/wrist pin), just fitted snug in the bearing in the con rod. What a pain in the bum lol
@rayrits8004
3 жыл бұрын
grate work man! i have 2 old Derbi variant moped. the 1e is the variant start. that my boss give to me. it was his 1e moped when he was 15 year. so i restored new paint every thing but i did no do a motor re build (just dont have time for it) it won't start. the sealing rubbers on the crank case are f+ckt ... anyway i find a 2e Derbi Variant for 50 euro.... and its motor is seized.. i look every where but no good info... until now! thank a lot!
@dha588
2 жыл бұрын
So basically, take off the engine compressor head, take a wood and bang the piston until it goes down?
@sixofhgr
11 ай бұрын
After you unsiezed that puch engine do you go back to using it as normal? Or what do you do?
@TravisTutorial
10 ай бұрын
If memory serves me correct, this one was fine for riding after, but it's a toss up. If you want to guarantee something will last it's a good idea to rebuild it after it's been hard seized
@screamineagle88
11 жыл бұрын
This is an extreamely helpful video. I have a '78 Batavus Laura M56 engine that I'm trying to get unstuck. Unfortunately, after I pulled the head I saw surfice rust throughout the top of the bore. I'm hoping I can clean that up. Got a question though. Where do you get your parts from? I need things like head gaskets, engine side covers (clutch & flywheel), and I may need the electrics under the flywheel. Plus some tools to get the flywheel,clutch and all that off. Thanks.
@f100storys8
6 жыл бұрын
Hi, im having a big problem here. I watched this video several times but i cant seem to make any progress. My scooter (yamaha neos) 50cc moped has a seized piston. I took the cylinder head of and tried turning the crankshaft. The cilinder does move away from the block but the piston is completely stuck in there. I tried putting some wood between the cylinder and engine block itself and hitting on the piston with a socket and a hammer. The thing didn't move at all. Any tips to solving this issue?
@whowho7969
2 жыл бұрын
Did you figure it out mine seems similar to yours?
@f100storys8
2 жыл бұрын
@@whowho7969 Yes, I watched a different video. I took a piece of steel (+-2cm thick). Drilled three holes. Tapped the center hole for an m10/12 bolt. cant remembrer. Take the cylinder head off. Bolt it the steel bar on like a half x (cross) over the cylinder. So diagonal on top of the exposed piston and cylinder bore. Snug the steel bar down with the nuts. Now get your m10 bolt (a long one) and thread it in with a ratchet. Piston should move down. Took a lot of turning and force but this worked excellent for me. I still have the old piston and cylinder as a memory. Total carnage! 2-3mm deep grooves
@whowho7969
2 жыл бұрын
I got it thanks 👍
@jazzbuckeye
8 жыл бұрын
If the rings are what's making the seal, why ever replace the piston?
@TravisTutorial
8 жыл бұрын
+jazzbuckeye You mileage will vary, as it's a case by case basis. If the piston was only stuck a little bit, you could probably get by with new rings and a hone. For that to be the case though you'll have to check a few things, for example does the piston still pass the "piston drop test" - that is where you "drop" the piston through the cylinder with no rings in it to check if it's deformed. You'd have to make sure the new rings move and seat properly. Even then, you could probably sand the piston a little strategically and save it. A lot of the time the piston could likely be salvaged, it just comes down to the extent of the damage, the time to repair, the skill.
@ajmh7562
7 жыл бұрын
What if my bike is a 4 stroke and gets too hot how do I cool it down
@ajmh7562
7 жыл бұрын
I also want to get a new cylinder kit will this continue to happen with a new kit ?
@robertbork4904
11 жыл бұрын
I have a puch moped that has been sitting a while idk how old it is but it's pretty old it's not seized the piston moves but idk if its worth rebuilding it has wiring that is scary to look at but I want to fix it how hard is it to rebuild these
@snolbie1016
7 жыл бұрын
michael bork The internet is your friend when rebuilding a moped
@whowho7969
2 жыл бұрын
👍
@T.Christmas
11 жыл бұрын
think this will work on a sachs?
@snolbie1016
7 жыл бұрын
tyler christmas Probably yes
@adriccochran4826
7 жыл бұрын
tyler christmas yes, it will. this technique isn't exclusive to any small, 2 stroke engine, and a 4 stroke, the proces would be mostly the same.
@Lady_Darkness29
10 жыл бұрын
my Latvia made moped DELTA v-50m looks better than this american ones
Пікірлер: 44