You don't have to remove the tail light..the wires that the license plate light pass through... you can pass your camera wire at that with really easy access, At least it was on my 13. Your video was extremely helpful. Really appreciate the time you guys put into it. Thanks.....PS..Cool Cat!!
@ajjeanson
7 жыл бұрын
You bet! Thanks for your comment we're always looking for ways of improvement for others! :)
@buyusgoods
7 жыл бұрын
It"s just finally nice to see a really good video done that is informative, on point and without the use of a bunch of explicit words ...Keep up the good work.
@rizzlerazzleuno4733
2 жыл бұрын
Yeah, cool cat.
@jjz814
8 жыл бұрын
This is how HOW TO videos should all be... Great editing! Perfect Jump Cuts.. No BS Filler.. Nothing but content.. Also you can use HOt GLUE instead of silicone, much easier and less smelly
@ajjeanson
8 жыл бұрын
Thanks a ton for the feedback! Yes, hot glue is a better alternative for silicon. Hope others see this post so they can use what's laying around.
@cosmodozer
8 жыл бұрын
Excellent Video!! I mean you did not miss one single step. Easy to follow. Didn't bore me with on going camera recording like most videos. Kudos!!
@ajjeanson
8 жыл бұрын
Thanks for commenting, I'm glad I could help! If any questions come up please ask, have a good one! :)
@IEatBlackChildren
2 жыл бұрын
Thank you for the tutorial was very helpful! Quick little tip: you dont have to route the cable through the center console it was much easier to route through the bottom of the door you dont even have to remove the trim piece. Then from there you can pull it through the glove box.
@ajjeanson
2 жыл бұрын
That sounds like a lot less work from what I remember. Thanks for the comment and I had accidently clicked the dislike button on your comment, sorry about that! Useful and helpful info is too good to dislike.
@nickswenty
7 жыл бұрын
awesome video! I just bought the Raxiom navigation for my 14 mustang. putting it in this weekend, this video will help out a ton. thank you for the great work.
@ajjeanson
7 жыл бұрын
nick swenty anytime thanks for commenting! Hope everything works out well for you. Any questions leave a comment and hopfully I or someone can help :)
@Krakenbuildz
9 жыл бұрын
You guys rock! Thanks so much for the break down.
@carloskane4439
9 жыл бұрын
u guys are good, but next time left the supervisor (cat) inspect the job
@whipp44baseball
7 жыл бұрын
Thank you so much for this video man. I have an 2008 mustang but everything is looking really similar. Im gonna install my cam in a few days
@ajjeanson
7 жыл бұрын
You're very welcome. If you don't mind, it would be great to hear how your 2008 installation works out compared to the 2013. Also, any additional info is always welcome and thank you for commenting!
@bryanbaez8973
7 жыл бұрын
Heard the intro and immediately was like yup hitting like on this 🤘🏽 Black Betty 🔥
@ajjeanson
7 жыл бұрын
Yeah buddy! I had to pick a intro that would make up for some of the video editing lol thanks for the like!
@jhennescomcast
9 жыл бұрын
Great video. I plan to put a camera in my 2013 but will use a mirror instead of a console display. Where did you tap reverse light power?
@ajjeanson
8 жыл бұрын
+Dave Schaeffer I cant seem to reply to your comment due to your post being a linked comment so if you read this post please like it so I know I successfully reached out to you. Im sorry to say this product was not factory and was included in a Raxiom radio dash kit 100300-A. I did a brief look myself and found nothing on the actual camera. I only found the spoilers the camera fits into. If I find anything else I will post it here. As always thanks for watching and glad you enjoyed the video!
@shabbee
4 жыл бұрын
really useful, thanks buddy!
@ajjeanson
4 жыл бұрын
You bet shabbee! Happy to help.
@danieldavis4496
7 жыл бұрын
HI Alex you didn't show which wire is for reverse light to connect the camera power to that wire what colours are wires thanks
@juanvasquez1576
5 жыл бұрын
Thanks for the helpful video, what type of camera are you installing? and i saw the cat helping Instant like
@Marco-pn7jp
4 жыл бұрын
God bless you. Doing the lord's work with this video. So helpful!
@ajjeanson
4 жыл бұрын
Amen, thank you Marco. I'm happy to help with the gifts Lord has provided.
@bcc5701
3 жыл бұрын
Adding a reverse camera to my GT500. I very much like this video
@stevewasilow5556
10 ай бұрын
Did you do a video of the Raxiom nav unit install
@ronaldehrmann3648
5 жыл бұрын
Great Video. Can anyone recommend a good rear camera to buy that has the correct angle and has mounting tabs like in the video? Any suggestions would be helpful. I have a 2013 Mustang
@raiderman28
8 жыл бұрын
great video, only issue was the zip-ties to hold the camera. Why not just use small sell tap screws to drill through plastic and onto metal??
@Seraphimx
7 жыл бұрын
I'm thinking of getting one; i've read some mixed reviews of the system. How has it worked for you all this time? Any major wtf moments? Little bugs are to be expected, nothing is perfect.
@kckuc310
5 жыл бұрын
Wow great job
@ajjeanson
5 жыл бұрын
Thanks Kevin!
@ludwiito
Жыл бұрын
Bro where did u found that panel to put a new stereo?
@uhhEagles
9 жыл бұрын
great video! Do one for an 07 GT lol
@gregw1971
9 жыл бұрын
I like the cat the best.
@ThreeFingers316
9 жыл бұрын
Dang makes this look easy...i might have to go with some geek squad install for this one. But good video nice!
@ajjeanson
9 жыл бұрын
Thank you and thanks for sharing!
@daveschaeffer3983
8 жыл бұрын
Fantastic Video. You make it look so easy. Is the camera you installed in the video a Ford OEM camera. If yes can you provide the part number. I tried to buy a camera at the local dealership but they could not locate a part number.
@fkerpants
8 жыл бұрын
+Dave Schaeffer Looks to be the Raxiom camera that comes with the GPS.
@Paradig22
8 жыл бұрын
Alex, I loved your video... very well done neat job.. the silicone and zip ties and all.. I have the Raxiom radio in my 2011 CS Mustang I just got... and the wire fore the camera was already run however the camera is missing.. Have you come up with any new info on where to get the camera? I went to Raxiom's web site and they are kind of useless...
@ajjeanson
8 жыл бұрын
+Paradig22 I hope you have found a camera by now to suit your needs! I don't know of Raxiom selling individual cameras but I know you can buy a different aftermarket camera with a PS2 style of connector plug to connect to your Raxiom radio. If you find a camera that you like that isn't supplied with a PS2 connector plug you always convert the existing wire in your car to RCA style of connector with a little splicing and soldering skills. Any further questions please ask! Also sorry for such late reply.
@bandknanacortes1858
7 ай бұрын
If you’re still on KZitem did you just buy an OEM camera from Ford and a camera line? I’ve got a 2014 GT but the California Special spoiler deleted the camera.
@MustangNthusiest
4 жыл бұрын
Is that a stock radio and where did you buy the camera. If somebody could list the parts required or where to get them please
@ajjeanson
4 жыл бұрын
The kit was a Raxiom radio dash kit 100300-A and the camera came with the radio package.
@mikekarim1827
3 жыл бұрын
Hello which wire is the reverse light so I can tap in the wire
@sarahdechnik5415
3 жыл бұрын
It is the white wire in the 2013 Mustang taillight harness.
@Johnnyroten
5 жыл бұрын
What brand and where did you get the wiring and camera?
@ajjeanson
5 жыл бұрын
Greetings Brian Pater! The kit installed in this video was the old Raxiom kit that came with a backup camera and wiring and is unfortunately unavailable now: www.americanmuscle.com/raxiom-gps-nav-1014.html The Navos is the replacement kit and unfortunately does not include a backup camera: www.americanmuscle.com/navos-oestyle-touchscreen-navigation-1014.html Thanks for commenting!
@Lee1Stewart
9 жыл бұрын
Im doing this with my 2014 but the difference is im using a wireless camera I need to hook into the reverse wire in the tail light you wouldn't know which wire is for the reverse and which one is for ground i cant seem to find a schematic anywhere this a great video and will help me get it done right. thanks for posting!!
@leafaraguilera2868
3 жыл бұрын
@Raymond B Is it the same color for a 2013 v6? I heard some people saying it's white and others blue.
@nickphelps4861
4 жыл бұрын
Nice kit- plug and play. BUT WHERE CAN YOU ACTUALLY GET THAT KIT..??? I've looked ALL over the internet and dont come close to that setup. Thanks in advance
@gloworm106
4 жыл бұрын
I recommend the Maestro RR with a compatible head unit from Kenwood or Pioneer. I went with a Kenwood that has Android Auto from Crutchfield for my 2014 and bought a backup camera (Natika) from Amazon, and installed using this video as a guide. It's been a great upgrade.
@franciscoreyes4005
4 жыл бұрын
Can this be done on a 2012?
@ajjeanson
4 жыл бұрын
Francisco Reyes, thanks for commenting! All components should be identical to a 2012 mustang in terms of the interior removal and tail light removal if desired but you can easily run camera wires along with the license plate illumination light wires instead. As far as the Raxiom touch screen you may have to look into a different model of touch screen radio as this one is no longer available.
@187MA187
4 жыл бұрын
What cable did you hook up to turn the camera when the car in in reverse
@sarahdechnik5415
3 жыл бұрын
It is the white wire on the tail light harness for a 2013 mustang. Lord, it took me forever to figure it out and I wanted to put that information somewhere on the internet for people to find.
@sarahdechnik5415
3 жыл бұрын
It's not the white wire. Will report back.
@leafaraguilera2868
3 жыл бұрын
So did you find out which wire it was?
@brandonv4900
2 жыл бұрын
Sarah plz report back on the reverse wire. Thanks
@brandonv4900
2 жыл бұрын
What color wire did you tap into for reverse cam to work?
@MikeEagleIII
Жыл бұрын
The Blue wire is the correct one
@MikeEagleIII
Жыл бұрын
* Blue is correct on 2011
@brandonv4900
Жыл бұрын
Blue worked on 2013 also.
@qaranhashmi905
3 жыл бұрын
I bought that same exact navigation from american muscle, but it was crap. First they sent me faulty wires, then the driver speaker didnt work, but worked after i put my old one back in. It rattled because it wasnt perfecy fitment, the backup camera units werent accurate measures. Didnt fit parking spaces. Then my music with shut off everytime i floored it. All in all piece of crap.
@ajjeanson
2 жыл бұрын
As time went on in this case the interface and touch screen where not up to par. Sounds like you were given a poor package. Sorry to hear it wasn't a good experience.
@ryanreynolds7771
6 күн бұрын
I have same Junk head unit it failed in one year to the touch screen does not work, This pissed me off cause when I bought head unit it cost over $699, I will never buy from American Muscle again cause their prices are high for the junk they sell and they only wanted to give me $20 off another unit They removed them shortlu fter many complained about their junk products !!. I got no help from American Muscle . I had to buy another head unit , Hope it lasts ? My Mustang is hardly used and adult owned and opperated . Don't don't know why the head unit failed its only good for blue tooth cannot adjust anything on this piece of crap. I had read recently that these junk radios head units failed immedietly out of the box. Stay away from American Muscle they don't support their junk products ! wonder if the touch screen could be fixed its not cracked its just does not respond to my touch ?
@BertrandBarraud
5 жыл бұрын
You don't even show how it looks like in the end.... -_-
@maxjeanson8640
9 жыл бұрын
Hahaha love it it's awesome, you for got to mention jack.
Пікірлер: 71