This Old House host Kevin O'Connor and electrician Scott Caron head to Denver to install a fan on a cathedral ceiling.
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: bit.ly/Subscrib...
Shopping List for How to Install a Ceiling Fan on a Cathedral Ceiling:
Remote-control ceiling fan with light kit
- 14-3 and 14-2 nonmetallic electrical cable, used to power the switch and fan
- Electrical tape
- Old-work fixture box and blank cover plate, for concealing wire connections
- Pancake electrical box with cable connector, used to mount the ceiling fan
- Twist-on wire connectors, for joining together electrical wires
- 36-inch-long downrod, used to lower the fan from the ceiling
Tools List for How to Install a Ceiling Fan on a Cathedral Ceiling:
- Screwdriver
- Needle-nose pliers
- Drywall saw, used to cut access holes in wall and ceiling
- Cordless drill with 3/4-inch-diameter bit, for boring cable holes
- Fish tape, used to pull wires
- Scaffolding and ladders, for working at ceiling height
- Linesman pliers, for cutting and twisting wires
- Wire strippers, used to remove insulation from wires
Steps for How to Install a Ceiling Fan on a Cathedral Ceiling:
1. Turn off the electrical power to a nearby wall switch
2. Unscrew the cover plate and switch from the switch box.
3. Use needle-nose pliers to snap off the plastic tab from the rear of the switch box.
4. Use a drywall saw to cut an access hole in the wall near the ceiling directly above the switch box.
5. Drill a 3/4-inch-diameter hole through the top wall plate.
6. Use a drywall saw to cut a second access hole in the ceiling on the opposite side of the wall.
7. Push a fish tape through the hole in the switch box and up to the access hole at the top wall plate.
8. Attach a length of 14-3 electrical cable to the lower end of the fish tape, and pull the cable up through the wall to the access hole at the top wall plate.
9. Push the fish tape from the top plate to the second access hole in the ceiling.
10. Attach the cable to the fish tape, then pull the cable across the ceiling to the second access hole.
11. Cut a round hole in the ceiling at the ceiling-fan location.
12. Push the fish tape from the second access hole down to the ceiling-fan hole.
13. Attach a 14-2 electrical cable to the end of the fish tape, then pull the cable to the second access hole.
14. At the second access hole, install an old-work plastic fixture box, then make the wire connections: white to white, black to black, and bare copper ground to bare copper ground. Leave the red wire unattached.
15. Screw a blank cover plate over the fixture box.
16. Snap a cable connector onto a pancake box, pull the cable through the connector, then screw the box to the roof rafter.
17. Install a 36-inch-long downrod to the ceiling fan.
18. Screw the fan's mounting bracket to the pancake box, then fasten the fan's brace to the bracket.
19. Hang the ceiling fan's ball joint onto the brace.
20. Make the wire connections at the fan box, then attach the fan blades to the ceiling fan.
21. Install the light kit to the underside of the fan.
22. Make the wire connections at the switch box, then reinstall the switch and cover plate.
23. Turn on the power and test the operation of the fan and light.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
Tumblr: bit.ly/ThisOldH...
How to Install a Ceiling Fan on a Cathedral Ceiling | Ask This Old House
/ thisoldhouse
Негізгі бет How to Install a Ceiling Fan on a Cathedral Ceiling | Ask This Old House
No video
Пікірлер: 516