Thank you. Watched 5 different videos before I found someone who got to the point and actually told me how to wire this thing. You’re awesome.
@SparkyChannel
Жыл бұрын
Excellent. Also see: How to Install a Marked Controlled Receptacle: kzitem.info/news/bejne/pGp3zYdshZuin3o
@daapple9924
9 күн бұрын
Wago Lever-Nuts are the best invention EVER! Wish I'd had them years ago when I rewired my house.
@Megamailh
2 жыл бұрын
Best and most clear description to wire this! And review is fabulous. Thanks so much.SUBSCRIBED!
@SparkyChannel
2 жыл бұрын
Thanks so much and welcome to Sparky Channel!
@homestar92
9 ай бұрын
You can also wire the device the other way around - line to brass screw, neutral to silver screw, and leave the jumper in place. Doing this will cause the switch to control the receptacle, which has potentially interesting use cases.
@chemistryguy
6 ай бұрын
Thank you. Looked a lot of places to find out how to wire it that way.
@enriquemejia5509
Ай бұрын
Hi, does the tab still need to be broken off?
@vadartime
3 жыл бұрын
I was at the end of my rope about to take the switch back to Lowes. Had tried everything and couldn't figure it out...then I found this video. He made it more clear than anything else I have seen! Thanks for the video. I was successful.
@SparkyChannel
3 жыл бұрын
Great job Johnathan! My pleasure, glad it was helpful!
@Heyu46
Жыл бұрын
This is exactly the video I was hoping yo find! Thank You, Sparky! You just solved my conundrum! Knowing the HOT from the LOAD wire was my missing link, lol.
@juanortiz7745
Жыл бұрын
Like always a superb teaching video. I am 77 Vietnam veteran and I have a problem with a fan with lights which is supposed to be turned on by a 3-way switch. I bought it 10 years ago for 800 dollars and I have been unable to use it. Every time I hired an electrician, he charges me money but does not fix my problem. Sir, if is not too much trouble do you think you can give this old man a hand, Thanks, Juan.
@tatamata6976
3 жыл бұрын
Man,I watched a lot of good videos, but yours is definitely the best. Such a clear explanation and repeated showing every single detail is just amazing. If you were a teacher, your students would know much more.
@SparkyChannel
3 жыл бұрын
Glad it helped! Thanks so much!
@ashvandersteenpersonal8998
Жыл бұрын
Great how-to video. I just wired up my combo receptacle following these well-explained instructions and it works perfectly. Thanks, Sparky
@SparkyChannel
Жыл бұрын
You're welcome!
@muffinz699
2 жыл бұрын
As a contractor & painter, (not an electrician or plumber lol but I’ve worked here & there on projects), I’m just going to say that this video is 100% amazing. I’m rehabbing my 1938 house and opened up a broken combination switch and was in panic mode, now I’m ready to head to Home Depot tomorrow to restart this little project. THANK YOU
@SparkyChannel
2 жыл бұрын
Thanks so much! Best wishes.
@muffinz699
2 жыл бұрын
@@SparkyChannel thank you 😊
@ianburkard
3 жыл бұрын
Thanks for posting this. I was working with a replacement combo switch and outlet where none of the screw heads were obviously colored for easy ID. The combo that I removed was from the 70's, and had a totally different layout than my modern unit.
@foraric
3 жыл бұрын
I have to echo others and say that this was a very helpful video. This was the first time that I replaced a combination switch and receptacle. I was replacing an incredibly old switch that was not clearly marked as newer switches are. Easy to follow and understand. Helped me to identify the wires and how to install the new switch. Avoided calling an electrician! Thanks!!
@SparkyChannel
2 жыл бұрын
Hi Rick! Great job on the install and on saving money too!
@ccadama
4 жыл бұрын
@Sparky Channel. Thanks Bill for the thoroughness of your videos. Even if you don't show every step (like every crimp or to wrap electrical tape around the receptacle), you do it and mention that you did it so that we should be paying attention to details. Hope you and your family stay safe and well.
@SparkyChannel
4 жыл бұрын
Thanks! Have a great weekend!
@KevinBenecke
3 жыл бұрын
If you want the outlet to be controlled by the switch, you connect the incoming line to the brass terminal.
@scottmahan4434
Жыл бұрын
Thanks for the video. It's time to wire up a swim deck ceiling fan with the switch your provided the link to. plus the outlet will be used for the plug in speaker, while the switch will be used for the ceiling fan to keep us cool in the summer while enjoying the swim deck on the lake. Thanks again for the video.
@hoofhearted1902
Жыл бұрын
Thank you for this! Brand name switch manufacturer video was no where near this helpful!!
@ftby59mikeD
3 жыл бұрын
Tremendous, your concise & clear instructions helped me with what must be a simple task for any electrician but a challenge to the average DIY'er. thank you
@SparkyChannel
3 жыл бұрын
You are welcome, thanks so much!
@ironkodiakbooks5115
Жыл бұрын
Perfect video. Extreamly easy to understand. Thanks to you I got it right on the first try.
@einarvolsung2202
2 жыл бұрын
Today I watched and listened to your video then I followed your instructions. Perfect real life situation and results. Thank you for sharing your experience and knowledge
@SparkyChannel
2 жыл бұрын
Fantastic! Great job!
@santiagoescalambre4738
Жыл бұрын
Very good teacher. Though I’m not an electrician I understood all what he did. Now I can do my own electrical work, thanks for sharing your talent to people like me……save lots of dineros thanks again
@khanaimangry4701
3 жыл бұрын
Best explanation of installing switches that I’ve found , thank you 🙏🏽
@SparkyChannel
3 жыл бұрын
Thanks so much!
@Hollywood2021
2 жыл бұрын
Thank you sir! I was struggling with this switch after installing a garbage disposal. I got everything working right, because you explained it perfectly.
@SparkyChannel
2 жыл бұрын
Glad I could help!
@rrsttt7505
4 жыл бұрын
You should do a video in the GFCI combination switch, it took me a couple tries to figure it out.
4 жыл бұрын
The way how you show how to work it is just very nice, I am trying to learn many things to became a apprentice and then a electrician, so your videos are helping to create many idea about how to work. For sure I have a long way, but at least your videos are giving me an idea how to start.
@SparkyChannel
4 жыл бұрын
Fantastic! Best wishes!
@edwinvasquezp
4 жыл бұрын
Thanks Bill, now I know why the switch wasn’t working that o was expecting, very simple. I just have to move one wire to the bronze screw, I installed in the black. So the power stay in the black screw and the switch wire goes to the bronze.
@OldGuyHelper
Жыл бұрын
Good thing I watched this video! Now the instructions make sense. Great video. Thanks for keeping me out of trouble again. I also learned about Wago nuts! Got some ordered.
@SparkyChannel
Жыл бұрын
Excellent!
@philoyphilia
4 жыл бұрын
Good morning Bill. Thanks for the video. You are coming back stronger. You are America's Electrician of the Year. My highest respect Bill. You are my hero 👍
@SparkyChannel
4 жыл бұрын
Wow, thanks! Thanks so much Lucas! I do think this channel is becoming a better one than the original. :)
@joshlucero9639
2 жыл бұрын
Thank you so much this explanation was exactly what I needed. This is what KZitem was created for.. you saved me literally hundreds!! Can't thank you enough
@SparkyChannel
2 жыл бұрын
Thanks so much Josh! Great job and glad I could help!
@chris_favreau
Жыл бұрын
I know how to wire outlets and plugs, but I've never done a duplex combo like this before, and I was concerned about the switch turning off the power to the outlet. I think that I've got it now. Thank you!
@SparkyChannel
Жыл бұрын
Glad I could help!
@Jlayism
Жыл бұрын
With the tab still in place, does the outlet still have power with the switch off? Or is the switch only breaking connection after the tab?
@eddiev2o9
3 жыл бұрын
Thank you. I will be changing out a single light switch to a combo light/receptacle outlet in my garage this weekend. Great video
@SparkyChannel
3 жыл бұрын
Good luck Eddie.
@eddiev2o9
3 жыл бұрын
Sparky Channel....Worked out great. Thanks again
@redshawn7
Жыл бұрын
Thank you! you helped me figure out a frustrating situation. Keep on keeping on my friend!!!
@SparkyChannel
4 ай бұрын
Thanks!
@benhatcher2603
2 жыл бұрын
Thank you, so much. I installed one of these to control under cabinet lights and almost gave up. I bought some tools using your link as a thank you.
@SparkyChannel
2 жыл бұрын
Thanks so much!
@jasonlara
3 жыл бұрын
So much info. The best video I've seen on this DIY subject. And the info in the description and the links to the products are just the topping on the cake. Just perfect. Sorry about the hack. I hope you get all the subscribers back. You deserve them. Stay safe.
@SparkyChannel
3 жыл бұрын
Thanks so much Jason!
@hemermadrigal3849
3 жыл бұрын
Thanks. I watched other videos, but your exceeded my expectations. Well explained. Love it.
@SparkyChannel
3 жыл бұрын
Awesome, thank you!
@HeavySixer
10 ай бұрын
Success! Thank you for posting this instructional video. The connections and current flow become quite simple after you explained which terminal does what. Bravo to you!
@SparkyChannel
4 ай бұрын
Great to hear, thanks!
@CSVUTUS
Жыл бұрын
This is the best explanation in the entire internet.
@tompiscitelli2548
11 ай бұрын
The only video that actually shows where the load wire goes other videos said it goes on the brass one my outlet worked only when my switch was on I wanted continuous power to the outlet ,
@SparkyChannel
4 ай бұрын
Great to hear, thanks!
@hydrainarms3135
2 жыл бұрын
When I was doing my apprenticeship the way I remember it would be B to B black to brass.the load wire. But at times the white wire can also be the load wire what you call continuity and that sometimes where things used to get tricky . But then you just reverse it white to b and your black becomes a neutral
@topgrain
Жыл бұрын
What a good teacher this guy is. Thanks!
@SparkyChannel
Жыл бұрын
Wow, thanks!
@forrestmac1
4 ай бұрын
Wonderful explanation of installing this combo switch device.
@SparkyChannel
4 ай бұрын
Thanks so much!
@forrestmac1
4 ай бұрын
Thank you for your explanation. We have an older house with wires going to other parts of the house! It’s been fun 😅
@SparkyChannel
4 ай бұрын
@@forrestmac1 I bet!
@scout7198
2 жыл бұрын
Excellent lesson. Thank you for enabling me to install my combo switch.
@kleineroteHex
3 жыл бұрын
best explanation I have found so far! Even electrical idiot me can understand this!
@Leviathan609
2 жыл бұрын
So, just a general question about these types of switches. If you leave the tab intact, then connect your line to the brass screw, and then connect your neutral to the silver screw, followed by your ground that it wouldn't be any different from a schematic point of view. The only difference is that the line wire would be on the other terminal of the switch.
@ArturoSoza
2 жыл бұрын
I was wondering if anyone else shook their head. Good catch
@greencable2222
2 жыл бұрын
thanks in the first two minutes I finally understood why it wasn't working for me. i was using a switch connection to give power to the receptacle lol. so that's why sometimes the black/whites are inversed, when they are a secondary line that comes from the light.
@SparkyChannel
2 жыл бұрын
Glad it helped!
@AntonioCastillo-qs9qf
3 жыл бұрын
This is the best video ever!! Thanks so much!!
@SparkyChannel
3 жыл бұрын
You're so welcome! Thanks Antonio!
@markgrady437
3 жыл бұрын
Outstanding workmanship, so in-depth details on your videos. Kudos to you you sir. Plus l love your Waggle hold in place wire nuts. Outstanding 👍🏻
@SparkyChannel
3 жыл бұрын
Thanks Mark! I like the Wago Lever-Nuts as well.
@alexdragic8865
2 жыл бұрын
Thank you for the thorough video, I was able to add this switch in my home with your help!
@SparkyChannel
2 жыл бұрын
Glad it helped! Thanks!
@Batman-nf4nn
11 ай бұрын
Hi, you could have used the deep Sigma box, regular is $4.68 deep one is $11.×× in Lowes or Az , but would by easier than using the extension, i think i will get the deep one for my project (the switch is for an outdoor flood light, and adding a gfci outside in the box outside where the cable from the inside switch to the light outdoor will be crossing on its way, so , i think the outside junction box/gfci outlet will get crowded, not much space for wires.... so even though i already have all the bushing etc prepared... I think I will just get the bigger-deeper box and avoid 3 hours of accommodating cables ... and those gfci are really boxy and big and deep they barely fit in outlet boxes nowadays!!😅😅
@SparkyChannel
11 ай бұрын
Good tip, thanks!
@peacefrog0521
3 жыл бұрын
Great video as always. What’s the area shown at the end of the video? I spent about a week in SD about 5 years ago and got to visit several areas including IB, Coronado, Cabrillo, and also some further north (Del Mar? Oceanside?) but can’t remember them all. Great area which I hope to visit again some day.
@SparkyChannel
3 жыл бұрын
That is the "Blowhole" on Oahu, Hawaii. I'm always on the lookout for pleasant clips from beautiful places to put on the end of my videos. It's my way of saying "thanks for watching". Yes, San Diego has some very beautiful places!
@perezr1241
3 жыл бұрын
Wow thanks for the quick response. I just learn something real quick that seemed very complicated but you made it seem way to easy. Thank you very much.
@SparkyChannel
3 жыл бұрын
My pleasure, thanks!
@hwongharry
2 жыл бұрын
Thank you. You give me courage to conquer my own home.
@SparkyChannel
2 жыл бұрын
Best wishes!
@user-zp6tg9xs1o
8 ай бұрын
You’re a life saver!!👍👍
@SparkyChannel
8 ай бұрын
Great to hear, thanks!
@me4654
Жыл бұрын
Ya after watching the whole thing I think I will call that handy man! I'm sure he's got all the testing tools
@djvelocity
3 жыл бұрын
*Question for those who understand electrical work* what is the point of pigtailing? I’ve run across this term many times over the years and I understand the basic premise of how it works but I don’t understand the benefit. Thanks 😊🙌
@saywhen1976
Жыл бұрын
How to wire a 3 way combo switch w/outlet having 1 red/2blacks & 2 whites capped behind? How wire a regular combo (non 3 way) with 3 whites/2blacks. Can figure 2nd one but getting ticked at the 3 way
@jimgulley751
Жыл бұрын
I always want to run stuff by you first. As always thank you very much!
@SparkyChannel
Жыл бұрын
My pleasure, thanks!
@Redbull240
2 жыл бұрын
Oh you said “competent”? I thought you meant confident hahaaaa. I still got it done without frying myself thanks man
@SparkyChannel
2 жыл бұрын
You can do it!
@abusultan31
Жыл бұрын
Thank you very much it was very helpful
@alanross3435
Жыл бұрын
Thanks you Sparky, very nice you the best teacher. I got this right the first time! 👍🏻☮✌🏻
@408disor
4 жыл бұрын
Great videos Bill thank you for sharing your knowledge. Have you worked with knob and tube wiring and if so how is a ceiling light connected?
@SparkyChannel
4 жыл бұрын
Thanks! I have experience taking knob and tube out and replacing it, which is what I recommend highly.
@408disor
4 жыл бұрын
Sparky Channel thanks for such prompt response. Reason I asked is because I have traced a ceiling wire to a switch on the wall ...there is voltage on one of the two ceiling wires and one leg at the switch when switch is open and voltage on both ceiling wires with the switch closed but when I connected a ceiling fan (blue and black from fan to hot wire and white to the other ceiling wire) nothing happens. I also tried connecting a light across the ceiling wires and nothing....
@408disor
4 жыл бұрын
Sparky Channel update I had an open neutral all good now :)
@warlocksden
Жыл бұрын
This is excellent, in another video they said that on the two live screws, if you attach the live wire to the switch it will control the power going to the plug effectively shutting it off, but if you attach the live wire to the plug screw both plug and light switch have power, is this true?
@chayaleshagalow1731
2 жыл бұрын
Thank you. This video makes the install real simple
@SparkyChannel
2 жыл бұрын
Glad it helped!
@lqdxoni1
8 ай бұрын
love learning from you
@SparkyChannel
8 ай бұрын
Happy to hear that!
@georgedonoso527
4 жыл бұрын
Thank you my friend. THIS really help me.
@SparkyChannel
4 жыл бұрын
Glad to hear it George!
@erics.4113
3 жыл бұрын
Same here. Only video on this that helped me understand exactly what I needed to know. Thank you kindly for the information
@grannyicu1458
4 жыл бұрын
Thank You for responding so quickly the info will help us with our project
@SparkyChannel
4 жыл бұрын
Excellent! Best wishes on the project!
@cat416b8
3 жыл бұрын
Bill I have 3 wires in my light switch box a black wire which is hot, a white which is neutral I guess and a ground.. I’m missing the load wire ..:I guess all the other wires are up at the fixture from the breaker ... is there still a way I can get this combo switch to work ... Thanks for any help
@t.r.robertson9430
3 жыл бұрын
I have the same question.
@cat416b8
3 жыл бұрын
I tried hooking the hot wire which is black to the dark common screw with the tab which is intact not broken. The neutral to the silver screw and ground to ground but the light switch wouldn’t work just the receptacle worked ..
@cat416b8
3 жыл бұрын
Bill I don’t know if you still read these but if I can’t use this combo switch I wonder if I can add a bigger box that would hold a switch and a receptacle and just pig tail off the The existing wires from the switch to the receptacle
@saywhen1976
Жыл бұрын
Great. I have 2 blacks and will pigtail my whites I see in back. Light works just need to make bottom outlet HOT. I'm not sure if adding the white to bottom left silver will do bc it's not a black wire but will see...
@saywhen1976
Жыл бұрын
Doing same in living room but LR just has 1white & 1black. Switch operates the lower outlet on opposite wall, don't think that's 3 way, I've tried every way on this one reversing wires. Not sure how to pigtail this one?
@danielr9743
Жыл бұрын
I am looking for a toggle dimmer switch combined with an outlet. I cannot find this anywhere. Please let me know the name of company that makes a combination dimmer switch and outlet. Thank you.
@garydudgeon
4 жыл бұрын
Another really good demonstration Sparky.
@SparkyChannel
4 жыл бұрын
Thanks so much Gary!
@nikitaq5897
4 жыл бұрын
This video saved my day this week, thank you 🙏
@SparkyChannel
4 жыл бұрын
Glad it helped! Thanks!
@jasonhuang5776
3 жыл бұрын
Thank you for all the details.👍👍
@SparkyChannel
3 жыл бұрын
My pleasure, thanks!
@user-cg9pw7ol2f
4 жыл бұрын
All of you posting videos about doing stuff you need to take example from this man he goes step by step not like you guys will show a receptacle but not the wires that coming out from who knows where or going where this man did it right
@SparkyChannel
4 жыл бұрын
Thanks so much!
@smidi0924
4 жыл бұрын
Great work Bill, i remember you did a video where you showed how to wire a gfci receptacle TR& WR outdoor with a regular duplex outlet. Can you do the same video? I will appreciate. Thank you again for your good work.
@SparkyChannel
4 жыл бұрын
I remember that one. I'll look for it on my hard drive. Thanks!
@kevinepp561
3 жыл бұрын
Great video mr. Sparky, I have learned so much from all of your videos. Any chance of you doing a few with arc fault circuit interrupters receptacles and Breakers
@jamesrosnack449
Жыл бұрын
Ive got a lightswitch that only has the neutral, hot and ground on a single pole switch, the electrician must have some kind of wiring in the light to make this work, can I still use this switch or is it not going to work because I dont have access to the load AND line wires?
@lancer525
Жыл бұрын
If you don't have a line wire, the electricity has nothing to go to. The switch controls whether or not power goes to a line wire, if it's wired correctly. Have to have that line wire going to something.
@christophermcgovern9993
Жыл бұрын
Thank you, this video was exactly what I needed.
@gregs3736
3 жыл бұрын
Thank you, question...is the outlet always on or switched in this configuration? I need the plug to always be energized
@SparkyChannel
3 жыл бұрын
Always on in this example.
@jeffj146
Жыл бұрын
Hey sparky thanks for the video, I installed the exact same switch. I attached the hot wire to only one black screw however when I turn on or off the switch it also turns the outlet on or off. Do I need to remove the tab and split the hot wire?
@walterramos1020
2 жыл бұрын
Thanks you Sparky very nice you the best teacher this videos help me a lot.
@SparkyChannel
2 жыл бұрын
Glad to hear that! Thanks Walter!
@cmass1967
3 жыл бұрын
Worked like a charm!! Thanks Sparky!!!!
@SparkyChannel
3 жыл бұрын
You're welcome! Thanks!
@sdorsetteii
Жыл бұрын
Hello good night, just making sure I got this correct wire up outlet to control a light and once tabs aren’t broken, the outlet to the bottom will not be disturbed with the toggling of the light switch , once tab is broken then the socket will be turned on /off with the switch…. Did I say that correct ? Sorry I’m new to this !
@dinos96744
3 жыл бұрын
Excellent video! Thank you so much!
@SparkyChannel
3 жыл бұрын
You're very welcome!
@arnieselectric007
Жыл бұрын
Bill, you always have good videos...thx buddy...
@SparkyChannel
Жыл бұрын
Thanks Arnie! Great to hear from you!
@GentlemanH
2 жыл бұрын
Does it not confuse people that the switch does not control the power to the outlet (plug socket)? As I understand it here, the switch is to operate lights and the electrical outlet has always got power and is used to supply power for example to a drilling machine.
@eddieloius4592
Жыл бұрын
you can wire it that way , just not sure how
@jelizarraraz1679
3 жыл бұрын
Excellent video such good explanation
@guillermovillasenor687
2 жыл бұрын
Can l connect a combination switch with only a black hot wire and a white neutral wire coming from the junction box?
@shakenbake2
Жыл бұрын
Any answers I've been looking for the same thing
@plasma3211
Жыл бұрын
My electrician friend says no. You cannot do this with one set of wires, black (hot), white( neutral) and a ground (bare). The reason being is because the white becomes a carrier or hot in this scenario. You would need to run another set of wires either from the breaker or from a nearby junction box.
@WilliamCWayne
2 жыл бұрын
Perfect, this is everything I needed to know! Thanks!
@SparkyChannel
2 жыл бұрын
Glad it was helpful!
@tb693ny6
5 ай бұрын
I installed this today. The outlet and switch work just fine. When I was doing some wire management I noticed I lost power. The power is being supplied by a 3 way switch apparently. When the 3 way switch is in the on position the Outlet and switch work. When the either switch on the 3 way switch is turned on or off it turn the switch outlet combo on/off.. I can't figure out why this is occurring. Thoughts?
@SparkyChannel
5 ай бұрын
My guess is either a loose connection somewhere or the 3-way switch is mis-wired. See my video: How to Fix a 3-Way Switch System: kzitem.info/news/bejne/pn2vvpyMaaJeZ6w
@tb693ny6
5 ай бұрын
Thx, I did watch it and a few others. The 3 way switches seem to work fine on either side but when either 3 way switch is turned off it shuts off power to the switch/outlet combo. It shuts off both the outlet and the switch because I didn't remove the bridge in the combo unit. @@SparkyChannel
@tb693ny6
5 ай бұрын
I believe the switch/outlet combo is receiving power from the 3 way switches so when they are turned off I lose power.
@tb693ny6
4 ай бұрын
had my local electrician stop over and look at it, they couldn't figure it out and I had it wired correctly. They think the previous owner of the home may have had a box buried in the wall with some odd wiring configuration. @@SparkyChannel
@SparkyChannel
4 ай бұрын
@@tb693ny6 Could be.
@ratj4715
3 жыл бұрын
I have this in my bathroom now the plug part stop working so I replaced it and cannot get it to work no matter what I do. But this house was built in the 50s I only got a hot and common wire and ground should I have 4 wires together am lost why I can’t get this to work. When it work for years.
@garybrown7317
3 жыл бұрын
Thanks for the video. This is a single outlet and in one of your videos, you mentioned that you cannot use a single outlet with a 20 amp breaker. I have a 20 amp breaker and I want to use this combo outlet, can I?
@yeskay97
3 жыл бұрын
Great video but my existing old installation has different wiring - two black wires both seem to be hot on one side with an unused ground terminal in the middle and two white wires on the other side, the bare wires are twisted together. Switch controls exterior light, outlet is always powered. How do I replace with a new liviton like the one you show? Appreciate any help. I will be happy to send you pictures if needed. Thank you very much.
@REFLEX1957
2 жыл бұрын
ABSOLUTELY AWESOME ...........................THANKS TONS, every step was perfect, and it worked as it was supposed to. thanks.......
@SparkyChannel
2 жыл бұрын
No problem, thanks!
@ramizkohi2652
2 жыл бұрын
Thank you so much so clear and so helpful after watching your video made me to install mine in a minute
@SparkyChannel
2 жыл бұрын
Excellent!
@omaryabby9444
3 жыл бұрын
just confirming. If we cut that tab, then the outlet would work off it's own power source and the switch can work independently - to control a separate light if it already has it's own power source that would connect to it's black screw?
@hectorpineda5379
3 жыл бұрын
Thank you for all the valuable information you provided....
@apopilay3755
2 жыл бұрын
The purpose of that tab is if you decided to use 2 different/dedicated circuit for light and outlet
@omaryabby9444
2 жыл бұрын
@@apopilay3755 Thank you. I think this is exactly what I need ti keep a switch as is while tapping to the power source on the other side of the wall for the purpose of a powerline internet extender.
@omaryabby9444
2 жыл бұрын
@@apopilay3755 (although, I do wish the light switch could be a dimmer, since that's what I have there now. I'm dreaming too much)
@mick4081
2 жыл бұрын
How did you get the plug in transmitter to light up if the main power was off. Cause you note that you had to turn the power back on to see if the light switch worked??
@juniorhdez9168
Жыл бұрын
Thank you so so much. You're an excellent 👏 teacher.
@SparkyChannel
Жыл бұрын
You're very welcome!
@clintonkim5075
21 күн бұрын
What if I have only 2 wires in the switch box? No neutral, no ground.
@DR0CK
Жыл бұрын
Could i pigtail the line, ground, and neutral to run to an additional outlett? And the from that outlett to another?
@Batman-nf4nn
11 ай бұрын
Yes, but be careful on connections and make sure electricity follows all the cables in the right direction, meaning, connect things in way that make sense if you know how to work with all this things and you have a good !! Notion of electricity, I am actually doing it myself, I am replacing a normal outlet inside the house with this device and then the switch is for a patio light outside and since I prefer to put box in the outside (nor that plastic garbage in different options with lid and 2 screws) , I am then adding an outlet gfci outside, so that outside box will have an normal gfci outlet and the wire to the lamp crosses by the box .
@FloresG998
3 жыл бұрын
Can the wires come from the interior, and out through an exterior brick wall,? The box would be attached to the brick.
@SparkyChannel
3 жыл бұрын
Yes, as long as you meet all codes.
@SparkyChannel
4 ай бұрын
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC: Amazon: amzn.to/445JhB4 Leviton T5625-W Decora Combination Switch and Tamper-Resistant Receptacle, White: Amazon: amzn.to/2FISV1A Playlist: Electrical Wiring by Sparky Channel: kzitem.info/door/PLSD43kAzjUITARtRyFqvVhmqwNm34Ck5k Playlist: EMT Bending by Sparky Channel: kzitem.info/door/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh Playlist: 2023 NEC Video Playlist by Sparky Channel: kzitem.info/door/PLSD43kAzjUISg0qOUMomYe8GH6a_C2xBv Playlist: Tracing Circuits and Wires with Troubleshooting by Sparky Channel: kzitem.info/door/PLSD43kAzjUIRYP5HI6T4K9gZA6ihMEjJs
Пікірлер: 350