This is a nice video for taking off the rectangular brackets. However the plate holder goes the other way around. It is shown upside down in the video. The three rectangles go on the bottom, not the top. The two sections that stick out from the back of the plate holder near where the screws go, will fit into the cavities left when removing the rectangular pieces. If you put the plate holder as per the video, they will not line up. For the plate just use some SMALL screws so you don’t drill into the bumper fascia… if the screws are too long, consider using a thick washer.
@eilvon7984
2 жыл бұрын
For people who do not know the next step, here is what I did. Use another two screws to mount the bracket on the car. You can see four tiny dents on the corners. Use screw driver with the two black screws which have sharp ends for your actual plate. PRESS VERY HARD!
@jonathanpark7658
Жыл бұрын
Audi sells screws for the pieces plate not just the mount. They also have plastic or metal clips that your screws go into. It attached the licence plate to the plate holder. The plate holder the. Attaches to the front bumper. If you just use self taping screws to attach your licence plate you are screwing holes into your front bumper, which looks awful if you move to a state that doesn't require a front plate. Please install them without damaging your front bumper. Also don't use a metal screw driver and damage your front bumper. The grill portion is 800 ish dollars and that's not including labor.
@breanna_madden_
Ай бұрын
What are the two small black things that you pop out called?
@larrygartijo8475
11 ай бұрын
so painful to watch
@stevevenn1
8 ай бұрын
😢
@alyssafeldsine6841
2 жыл бұрын
But how do you get the actual plate on the bracket?
@JustJayBeee
2 жыл бұрын
Thanks! But how do you put the actual plates on afterwards?
@burhanarshad9705
2 жыл бұрын
It’s been weeks and I still can’t find the answer. Let me know if you figure it out. I’ve been trying every which way to put the actual license plate on but nope nothing.
@jacobsnow9510
2 жыл бұрын
@@burhanarshad9705 ours is bigger than our license plate… might need to buy a smaller plate or something
@gerardoguzman7737
4 ай бұрын
Don’t know if you figured it out but get a couple of M6 screws and they will screw into the license plate bracket.
@KYLE_FROM_THE_FUTURE
10 ай бұрын
After I scratch the vehicle ten times and break all the brackets… buy this car from me 👍🤣 I promise to give you the best deal (adding every little dealer bonus).
@larrygartijo8475
7 ай бұрын
😂😂😂😂😂😂
@Cane4lf
3 ай бұрын
Just an FYI the bracket is upside down in the video. Flip it around and will work fine.
@rigoreyes1569
2 ай бұрын
I just installed this bracket and noticed the same. The 3 clips slide in on the bottom of the grille, the holes line up perfect and takes a T20 driver to screw on the two screws supplied. Its sits flush once installed properly. Sorry but in the video, the Audi associate does not know what he is doing.
@bryantgiscombe3425
Жыл бұрын
What is the name or part # of the brackets that you removed in order to put the plate on?
@CamKalsu
Жыл бұрын
Did you ever find out? Wondering the same thing
@LITMIDNIGHT
6 ай бұрын
Did you guys find the part #
@onerobertfour
4 ай бұрын
What about front plate options for a 2023?
@johnforbes4795
8 ай бұрын
Thanks! That's been stumping me while I waited for my DMV plate to arrive.
Пікірлер: 21