I'm always amazed by how nice your cars always look. +1 for driving within its limits and not trashing out your cars.
@outsourcedrc
3 жыл бұрын
Thanks. I have as much fun as I can with them with out trashing them.
@22guru
2 жыл бұрын
Nice job 👍 looking to do this soon. First upgrade bought used
@yuutamooney7464
3 жыл бұрын
All your videos are super helpful, keep posting good videos!
@outsourcedrc
3 жыл бұрын
Thanks!
@22guru
2 жыл бұрын
You're the man thank you for doing this
@jonk967
3 жыл бұрын
Great how too video. I am sure I will reference this in the future while working on my rustlers. As always, great stuff Sir, keep the video's coming.
@outsourcedrc
3 жыл бұрын
Thanks!
@AllenBePro
3 жыл бұрын
Need to do this to one of the kids Rustlers. Started off brushed and now running a Castle sidewinder 4 system.
@fabiwasabi9190
3 жыл бұрын
I just did this but it was from a stampede 4x4 to now a hoss worked out pretty well.
@jamesplymire5342
3 жыл бұрын
I just did this about 6 weeks ago. Good job!!
@PorkinsTheWhite
3 жыл бұрын
I ordered mine and it just came. I only found out about it as I was on Traxxas's site looking for a part number and came across it that way.
@michaelmacisco2566
3 жыл бұрын
Thanks ! Great to know and see.
@Nerm78
3 жыл бұрын
Love how neat and clean you keep all of your stuff. Great video. You never did make me a video and tell me about your old mustang!
@outsourcedrc
3 жыл бұрын
Thanks. I just never think about it. I'm always so scatter brained with my ideas. Videos get pushed out of the way all the time.
@mikestranzl6873
3 жыл бұрын
Something I may need to consider moving forward, great info
@jamesplymire5342
3 жыл бұрын
It took me a few hours too, but I'm partially disabled. Lol Great video though!!
@andrewk4669
3 жыл бұрын
Thinking of saving for a 2wd rustler and making a drag car with it should be fun!!!
@areameye69
3 жыл бұрын
good project, I will do the same to ease the battery situation 👍
@johnabelljr1997
2 жыл бұрын
While you had it apart. You should have upgraded the motor mount to an aluminum one
@madrcdad7677
3 жыл бұрын
Awesome video Q. Do you only use traxxas battery?
@outsourcedrc
3 жыл бұрын
In my Traxxas? I do now. I used to use Venom. I've swapped over to Traxxas. They just fit better in the battery trays.
@madrcdad7677
3 жыл бұрын
@@outsourcedrc thanks for the reply Your videos help me a lot
@DanBrando
4 ай бұрын
@@outsourcedrcthey do I agree
@kevinbrusehaber1987
3 жыл бұрын
Any suggestions for solid 1.5 - 2.5 driver bits for RC? The ones you have look perfect!
@outsourcedrc
3 жыл бұрын
These are the ones I have. www.amainhobbies.com/team-associated-factory-team-1-4-drive-power-tool-tip-set-5-asc1674/p200352?gclid=CjwKCAjw07qDBhBxEiwA6pPbHkTbkv3QsEK8SjcTQqyUgBnrYcs3BwNoXivYptXZbJ-avWEj6M_bkxoCItoQAvD_BwE
@detagenxx2300
3 жыл бұрын
So professional! Hey, do you have any advice on for my Hoss? Turning radius is so bad especially at higher speeds and in grass. My Armma Granite turn radius is insanely tight. More than I could ever actually need. Please help!
@outsourcedrc
3 жыл бұрын
Thanks. Hmm.. I am not sure. Does the turn radius tighten up when you let off the throttle? Most RC's have poor turning under heavy throttle. Make sure everything in the steering is moving smoothly and isnt binding. Maybe something is too tight, or even the servo may be bad.
@205RC
3 жыл бұрын
are you gonna get the new traxxas drag c10 ?
@205RC
3 жыл бұрын
sweet
@outsourcedrc
3 жыл бұрын
I doubt it, but I said the same thing about the Ruster.. and the Hoss...
@RickyD1968
2 жыл бұрын
FYI you should always power up your servo so it goes to center then install servp arm and rest of rustler build !!!!!
@liamcoetzee2828
3 жыл бұрын
Hi can u please make a video of the traxxas rustler vxl and the traxxas hoss
@outsourcedrc
3 жыл бұрын
Yes! Thats why i made this video.
@liamcoetzee2828
3 жыл бұрын
@@outsourcedrc thanks 🙏
@ItzzSwaggy
3 жыл бұрын
Question I converted my rustler 4x4 to a hobby wing esc and motor rated for 4 cell I upgraded all of the gearing to higher quality gears and switching from zeee lipos to traxxas lipos I am looking the 4 cell 5000mah traxxas battery and it has the different connector with the integrated balance wires do I have to buy a new connector or does it work with the regular id connectors
@outsourcedrc
3 жыл бұрын
do you mean do you need a new connector for the ESC? I clipped the end connector off my Traxxas ESC and put it on a hobbywing and I use traxxas batteries with it. It works fine.
@ItzzSwaggy
3 жыл бұрын
@@outsourcedrc I figured it all out
@es2910
9 ай бұрын
Does the new chassis change the wheelbase?
@sean7368
3 жыл бұрын
Thank you but do you need the new front bulkhead?
@outsourcedrc
3 жыл бұрын
Because its shorter than the old one.
@calebthomas5411
3 жыл бұрын
ive been thinking about getting my first rc car and ive been looking at the rustler would you recommend me getting it ? im paralyzed ive always enjoyed Rc cars but never gotten one lol
@outsourcedrc
3 жыл бұрын
Yes! Its a great first RC. It even has a self right feature that sometimes works. The Rustler is tough and is pretty easy to work on. its plenty quick and wont tear it self apart all that bad.
@chrisryder4709
3 жыл бұрын
Sad , but my rustler vxl became a victim of the cost of my RC max raminator , loved that car ,and I had it compleated updated and it was Seahawks colors perfectly , I'm actually considering getting a new one , but I put lots of work into that thing have to start over I geuss
@matseurenius2214
3 жыл бұрын
What's the difference between the old and the new bulkhead?
@outsourcedrc
3 жыл бұрын
One fits the new chassis and one doesnt. The new one is just shorter.
@matseurenius2214
3 жыл бұрын
@@outsourcedrc Thanks!
@lp_rc523
3 жыл бұрын
Is the chassis it self longer or just the battery compartment?
@outsourcedrc
3 жыл бұрын
Just the battery tray.
@jeffbryner5355
Жыл бұрын
Just a bigger battery tray is all this upgrade is for? I have onyx 3s batteries that fit in my first gen brushed version with no problem. With that said I need to tje the vxl 3s strap for it. I don't ever run Traxxas batteries because they suck imo for the price. I guess I don't use any of there electronics either well because they suck hahaha. With that said I ha e never had a problem with aftermarket batteries not fitting
@nathanroth6240
3 жыл бұрын
Might I ask the battery tray dimensions for the gen 1 and gen 2 chassis. I have a gen 1 chassis on mine and I would like to know if it's worth taking the time to change them.
@outsourcedrc
3 жыл бұрын
The Gen 1 is 135 mm and the Gen 2 is 165 mm long. Everything else is the same.
@nathanroth6240
3 жыл бұрын
@@outsourcedrc ok thanks
@isaiahmahood885
4 ай бұрын
On my rustler 4x4 vxl a 138mm length battery fits perfectly. Bc im stuck on finding what gen i got.@outsourcedrc
@rogerbahr9117
2 жыл бұрын
Does the gen 2 chassis make it any longer or not?
@outsourcedrc
2 жыл бұрын
Nope. Same size
@SRTDreakeo
2 жыл бұрын
Where did you get your gen 1 battery hold down
@outsourcedrc
2 жыл бұрын
It came with the RC. There are like 3 in the box.
@nl25c
3 жыл бұрын
Where can I find the drill bits
@outsourcedrc
3 жыл бұрын
This is them. I got them at the hobby shop. www.amazon.com/Team-Associated-Factory-4-Inch-5-piece/dp/B005EDIKE6
@V8chump
3 жыл бұрын
Why’s traxxas always do these sneaky ass updates to their cars? Arrma changes the electrics and screams it from the rooftops meanwhile traxxas doesn’t even tell us 🤣
@outsourcedrc
3 жыл бұрын
I don't know. It makes no sense to me.
@drbluexd3082
3 жыл бұрын
@@outsourcedrc So i bought a rustler 4x4 vxl in 2020. Does it have the gen 1 chassis or the gen 2 chassis?
@Doman9191
3 жыл бұрын
@@outsourcedrc Do u know if there are 2 gens of maxx? Because the older ones have different box (red-gray car) than the newer ones (orange car).
@EXTREMERC416
3 жыл бұрын
Arrma doesnt tell u when they revise stuff. They revised the exb diffs, vorteks shock towers,kraton 8s chassi bracing, krAton 4s arms,arrma 3s arms, kraton 4s body thats all i know off(because if have them) Imo its more traxxas rooftoping with their old stuff like tsm and fancy name calling stuff that isnt new
@V8chump
3 жыл бұрын
@@EXTREMERC416 arrma shows their updates right on the front page of their website 😂 For instance though, they revised the e revo toe links and nobody knew for like a year or the widemaxx kit extended driveshafts people figured that one out quick but they didn’t really tell anyone they kinda just added it to the widemaxx kit and let everyone figure it out when they bought one. Perplexes me as to why they’d do it like that, I definitely prefer arrmas system with a big “NEW V5 NOTORIOUS” or what have you right on their front page. Right now their front page of arrma shows all the updates on a ton their cars from when they did the electronics update a while back
@CodySmiley
3 жыл бұрын
Do you have the screws replaced with steel ones, so you unscrewed them so easily? In my Erevo 2.0 half of it is already damaged and it is impossible to remove.
@V8chump
3 жыл бұрын
Sheeesh you using power tools? I haven’t had any stripping issues with my traxxas trucks but if you have a dremel just cut a notch into your screws and use a straight blade screwdriver to back em out by hand
@outsourcedrc
3 жыл бұрын
No these are all the stock screws.
@cameroncameron2581
3 жыл бұрын
Ur mustang gotta flat?
@outsourcedrc
3 жыл бұрын
Its got a lot of flats lol. Those tires are dry rotted and are at least 15 years old. Maybe 20.
@bill9248
3 жыл бұрын
sorry for weird question but is your garage heated/cooled? I noticed you store your lipos there. I prefer to do the same but worried about temp changes in ohio
@V8chump
3 жыл бұрын
Same and my garage is full of flammable/explosive things 🤣 I put them in a lipo bag then put em in a metal ammo box and store them in my house 🤭
@outsourcedrc
3 жыл бұрын
Nope, but I live in Georgia. It almost never gets below 20 degrees here.
@rayjohnson5875
3 жыл бұрын
Do you want to sell that gen1 chassis
@outsourcedrc
3 жыл бұрын
I'm going to hang on to it incase I need it for a video or something.
Пікірлер: 88