This is the same ecu i plan on running in the S2000 once i get to that point.. i was between link g4x and haltech elite 1500, but links fits better since it goes inside the stock ecu.. Any cons that you have come across by running links?
@MtGarage
10 ай бұрын
My biggest recommendation would be to find a good tuner, then run the ECU they work with. It's a good ECU, i still like it, but had a tough time finding a good tuner to work with it
@civicpride1986
10 ай бұрын
@@MtGarage I am very familiar tuning with hondata S300, So i plan on tuning it myself, evans tuning has courses i can buy that show step by step tuning cars using this ecu.. i feel i can do it with more knowledge on how the software works.. I am always changing stuff with cars so i feel i need to learn the tune myself in order to have a good running car.. Most decent tuners here are at least 7hr away..
@drtec6349
6 ай бұрын
My link ecu has no RPM signal. My tuner is calling it defective and I'm so pist off, he's calling link junk and said he's seen defective units 7 times in his life from them.
@AstleTruscott
6 ай бұрын
Just brought one for my GTX 😬 but I'm in NZ so should be all good hopefully
@drtec6349
6 ай бұрын
dont be surprised with clicking relays, LINK is junk@@AstleTruscott
@BradWorona
Жыл бұрын
Hey I'm doing the same thing on an S14 Silvia, I have some wiring questions for the expansion harness. I have a fuel pressure sensor, oil pressure sensor, IAT all installed. Do I just run my 5v to each sensor in parallel from the expansion harness? Do I do the same with the sensor grounds? I'm hesitant to start doing my wiring because I can't find any info on the expansion harness wiring when it is going to multiple sensors.
@MtGarage
Жыл бұрын
That's a good question. I would suggest asking this on the Link ECU forums. They will get back to you quickly and are very willing to help. I also found no information on the expansion harness
@monstersquashracing
2 жыл бұрын
Thanks for sharing man i love seeing this kind of content. 🙏🏻🙏🏻🙏🏻
@datboi8140
2 жыл бұрын
Keep up the great content👍🏻
@beratelci9752
Жыл бұрын
hi we are working about formula student and we choice this ECU if you have about any information about this ecu please share me maybe datasheet
@MtGarage
Жыл бұрын
The Link ECU site has all the information you should need. linkecu.com/which-ecu/
@roweriding23
Жыл бұрын
where and how did you find and download the "drivers"
@MtGarage
Жыл бұрын
Windows should download them automatically. If not you may have to reach out to Link support
@bryanmejia808
Жыл бұрын
Did u have to mess with ecu jumper switch
@MtGarage
Жыл бұрын
I did not need to change the jumper as I'm running the S14 and the jumper setting did not apply to me
@bryanmejia808
Жыл бұрын
I got the same ecu same engine same car my tuner is struggling to get car started any tips to look at ?
@MtGarage
Жыл бұрын
I had to set the trigger offset to about -60 to get close to starting. I realized the trigger and timing settings are very important. Also reach out to Link support or the Forums, they are very good
@Tim_turbo97
Жыл бұрын
Well I used my wrist strap wrong 🤣 hopefully I didn't destroy mine..
Пікірлер: 19