Thank you so much for the very clear instructions on hanging the gate and links for buying the correct parts. The box stores were no help at all. Our posts are already in. The fence guy never came back to hang the gate so we are going to do it ourselves and I couldn’t figure out what parts I needed. ❤️❤️❤️
@AKennethNolan
5 ай бұрын
Good luck! Yes, I found the kits at the hardware store to not be that helpful.
@danielgrey1688
9 ай бұрын
I needed this! Thanks for the details and the work.
@cait1913
6 ай бұрын
This is just what I was look for! Thank you! Very well explained :) I’ll be checking out your other videos!!!
@AKennethNolan
6 ай бұрын
For some reason it's hard to find videos on doing this. Glad it was helpful.
@felipecantoni20
Жыл бұрын
Thanks man! Just what i've been looking for!
@AKennethNolan
Жыл бұрын
I hope it helps. I couldn't find much online on this subject.
@ryanwalsh5305
3 ай бұрын
Great video, thank you!
@AKennethNolan
2 ай бұрын
I hope it was helpful. Thanks for watching!
@RuthMendoza-qk3rl
3 ай бұрын
Thank you
@jennifersager7008
2 ай бұрын
My gate is 1 3/8" but your link for hinge pin is 1 5/8" and link for hinge is 1 3/8. Is that correct to get 1 5/8 for post and 1 3/8 to connect to gate? Ty! Video was exactly what I needed to see.
@AKennethNolan
2 ай бұрын
Yes, these are the correct links! The hinge pin is actually 5/8, it's for the smaller part of the hinge. The 1 3/8" hinge dimension is for the larger steel pipe of the gate. Does that make sense? Hard to explain without showing you a diagram. I hope that helps! Let me know if you think my information might be in error.
@briansisko2608
3 ай бұрын
Will not the fence lift right off the hinges unless you install one of the hinges facing downward?
@AKennethNolan
2 ай бұрын
The hardware I used can be tightened with a nut, so there is no risk of the gate lifting off, unless the nut loosens and the gate is lifted by force. It's been nearly a year and it's still in excellent shape. Thanks for watching!
@user-cr9rg7iz8u
7 ай бұрын
What size washers did you use for the Lagscrews?
@AKennethNolan
7 ай бұрын
Use whatever washers fit your screws. I just used washers that I had in my spare hardware.
@bettebruce2277
5 ай бұрын
How do I know if I should order the 1 3/8” or 1 5/8” fence hinges. I have a chain link fence from Lowe’s. I have no spare washers so I need to know what size to order. I’m a woman on my own and don’t have help. Thank you.
@AKennethNolan
5 ай бұрын
It depends on the diameter of the pipe frame of your gate. Can you go measure it? If it's 1-3/8" (which is most common) then get that one. Amazon lets you choose the size you need. Fortunately they're not super expensive, so if you get the wrong one, no big deal. Good luck on your project!
@xvz.zevends
Ай бұрын
Where is the link for the parts list?
@AKennethNolan
Ай бұрын
It's in the information section, below the video.
@user-cr9rg7iz8u
7 ай бұрын
What height fence is this for?
@AKennethNolan
7 ай бұрын
The fence is 4 feet or 1.2 meters tall. The posts are 8 feet or 2.4 meters.
@cherylparker5801
23 күн бұрын
will it work on a circular post
@AKennethNolan
22 күн бұрын
I've never worked with a circular post, but I don't see why this same method wouldn't work. Depending on the width of the post, the anchoring plates might not sit flush. You may need to use shims or something so the plates are flush with the curved surface.
@lanettediaz8883
4 ай бұрын
What size gate is that? Do you buy it at Lowes?
@AKennethNolan
4 ай бұрын
The frame of the gate is 1 and 3/8 inch steel pipe, which determines the size of hinge and hinge plate you use. In terms of the gate's dimensions, I THINK it is 4x3.5 ft, but I could be wrong.
@AKennethNolan
4 ай бұрын
I got the gate at Home Depot, but I bet Lowe's carries them too.
Пікірлер: 28