Bro this is crazy uploaded 4 minutes ago as I’m about to install my rear sway bar….this is crazy
@INeedlessI
Жыл бұрын
I stand with Kevin
@DatGR86
Жыл бұрын
Y’all are foul for firing Kevin Vo.
@20VA
Жыл бұрын
@SlowAssGR86 ... they fired him ???
@DatGR86
Жыл бұрын
@@20VA yes
@20VA
Жыл бұрын
@@DatGR86 ... wow ... what for ???
@SkyeHack
Жыл бұрын
Foster, you better quit in solidarity for Kevin!
@deadly134
Жыл бұрын
Justice for Kevin!
@jacobsilva11
Жыл бұрын
Kevin>subispeed
@K_Mag
Жыл бұрын
Whyd you fire Kevin :(
@crispysocksss
Жыл бұрын
He stole money from the company
@Pablo-tt5zy
Жыл бұрын
Give us Kevin back!!
@TheSuperNerf1
Жыл бұрын
No way you guys turned off comments on your new video because you fired Kevin. Y’all are so shady. Horrible treatment of employees, and won’t even address the issue. Yikes. Y’all are embarrassing
@EnriqueKikeVelascoPr
Жыл бұрын
I like how y’all turned off comments on your newest videos cause you can’t stand the Kevin heat. Hold this L
@xanny6481
Жыл бұрын
Why yall fire Kevin for
@20VA
Жыл бұрын
you DO know all suspension components MUST be torqued with vehicle at full load right ???
@simonschaden7009
Жыл бұрын
who tf is this goofy ahh
@michaellopez1118
Жыл бұрын
WE STAND WITH KEVIN
@mv9926
Жыл бұрын
No comments on Kevin huh?
@ardikasulistija6574
Жыл бұрын
Boooooooooooooo where’s kevin
@itzdaxx1154
7 ай бұрын
Um I believe you aren’t supposed to torque things down until you have car on the ground to prevent positive load on the bar😊
@PancakePigeon
Жыл бұрын
Boycott subispeed
@benson827
Жыл бұрын
Kevin back pls
@johnconnor2402
Жыл бұрын
Nah, he should focus on his own channel. Never be loyal to a company because they will always screw you on the drop of a hat like these guys did.
@K03sport
Жыл бұрын
That "new" endlink hardware isn't long enough for the (red) aftermarket lca. You need 2-3 threads past the nylon locking ring (in the nut) for the nylon to do its job properly. I would not trust it. On the stock lca (that is thinner), it would probably be the right length...but on these red lcas, that endlink bolt is too short !!!
@KaiLu-pp9rq
Жыл бұрын
Justice for Kevin
@Somchine13
Жыл бұрын
My first time here, so what happened to Kevin? Can we hear your side of the story?
@JonnyR90
Жыл бұрын
I remember watching a video of Kevin installing those Ohilins coilovers. He said he would do a full review on them but never did 😕 could you do a full review on the Ohlins?
@ryanharrison2260
Жыл бұрын
They fired him with no notice. So he won't be.
@aland7236
Жыл бұрын
Any chances for a demonstration of finishing up while the suspension is loaded? I've never found a good way to do it without having a pit or something.
@EvenFlow12345
Жыл бұрын
Shouldn't the suspension be under load before tightening the end links?
@casperscustoms1578
Жыл бұрын
in this case the top can be tightened down without load, the bottom can be tightened if there is a bearing of some sort. if it is a bushing then you are correct, it needs to be tightened at ride hight.
@SubiSpeed
Жыл бұрын
Yes, you want to lower the car and check clearances/tighten endlinks as mentioned at the end of the video!
@ImJustGeoffrey
Ай бұрын
The adjustable whiteline end link snaps...
@Abomb31
Жыл бұрын
Is tagt Kevin
@mts635htr
Жыл бұрын
I'm just here to drop off the 👎
@MgMg-sm5je
Жыл бұрын
Where's Kevin?
@thatmfslimsam
Жыл бұрын
Badass install! Thank you!
@matthewdohan5199
Жыл бұрын
guys a diddler
@WJDO.
Жыл бұрын
Unsubscribed. Unbelievable what you guys did to one of your key members that was with you guys since day 1.
@ryanphil213
11 ай бұрын
I'm sorry but this dude did not use the torque wrench right!
@tedsirlouis1372
Жыл бұрын
snowflakes cant take the heat for firing kevin turned their comments off
@stevep4236
Жыл бұрын
Everything is so much easier when you have a lift lol
@casperscustoms1578
Жыл бұрын
I broke both front Whiteline end links in my 16 WRX. They both broke at the adjustment screw into the body. I went with the Perrin solid end links after, and never had another problem.
@SubiSpeed
Жыл бұрын
Whiteline actually updated their endlink design, the ones in the video are the old style but the new ones are solid as well!
@KP-ol3tc
Жыл бұрын
Bout to ask a dumb question from a new Subi owner. Is this a fairly simple addition on my '17 Impreza Sport Wagon or is it a pain in the ass compared to the WRX/STI since I notice most upgrades seem to be on those platforms?
@SubiSpeed
Жыл бұрын
install should be almost identical. Finding a direct fit sway bar for your application might be a little more challenging
@KP-ol3tc
Жыл бұрын
@@SubiSpeed Good lookin out. Yeah, I figured it may be more challenging than the WRX/STI platform but I'm a wagon guy and I got this near-mint Impreza with 17k miles for 6k from a family member that had a recent life change so I couldn't pass it up!
@K03sport
Жыл бұрын
Crosstek and Impreza bits should be really close (same chassis, yes?).
@KP-ol3tc
Жыл бұрын
@@K03sport Mom's just bought a Crosstrek because it's nearly identical to her old Impreza but taller/easier for her at her age. Dude and the dealership said they are nearly identical so that's a good point, gracias senior
@K03sport
Жыл бұрын
@@KP-ol3tc ...even bits off the 2015+ WRX are swappable w/2013-2017 Crosstrek. In 2018, the Crosstrek (and Impreza) moved to the newer chassis (the WRX /STi did not)
@Slushiie
Жыл бұрын
Bring back the wrx rebuild series 🔥
@SubiSpeed
Жыл бұрын
Good to know! what else would you like to see?
@Slushiie
Жыл бұрын
@@SubiSpeed maybe side shirts, front lip, rear spats. Something not too expensive cause of the daily driver build. Driver feedback mods are great too. Not really sure what’s already installed on the wrx though haha
@ZargothraxAC5
Жыл бұрын
@@SubiSpeed More Kevin
@NitroSpeedz
Жыл бұрын
@@SubiSpeed you taking a big hit
@FireBlazeKush
Жыл бұрын
If you have the dislike extension, this video currently has 110 likes but 598 dislikes lol
@Clemdogg
Жыл бұрын
Bring back Kevin this will affect you business this is so dumb to do to him
Пікірлер: 72