Great Video! FYI, you can remove that rubber bumper from the inside if you take the taillight off, it's just a couple screws.
@TheMinuteMasters
Жыл бұрын
Thanks man!🤙 Good to know! I’ll have to check that out. I hate seeing the mounting plate still there.
@PsychoSasquatch
2 ай бұрын
Anyone install one on each side of the tailgate? A left and right?
@NevaPazos
Жыл бұрын
Mine came in and when I installed it the bottom of the piston keeps popping off. After a few more try's I noticed it was hitting the hump on the tailgate that comes in contact with the rubber guide I removed as you did in the video. For visual clarification it is hitting the part to the right of your finger at 2:39 in your video. What am I doing wrong, I'm sure its simple and I'm just not seeing it.
@TheMinuteMasters
Жыл бұрын
Do you have the assist mechanism installed in the correct orientation? Otherwise, I’m not sure what is causing that.
@borderlineiq
Жыл бұрын
"Buttery"? Please don't lick your parts. 🤣🤣🤣
@TheMinuteMasters
Жыл бұрын
🤣🤣🤣🤣
@PsychoSasquatch
2 ай бұрын
Installed one on the driver side like in your video. Works good. Thinking one on the otherside also might be great!
@TheMinuteMasters
2 ай бұрын
Nice! That would be cool to try.
@7085stang
15 күн бұрын
link no longer works.. do you have a part number?
@TheMinuteMasters
15 күн бұрын
Here’s the link to his website jccustomsmetalfab.com/
@zzsh0tgunzz
10 ай бұрын
Great install man! I'm planning on doing mine soon. What tonneau cover is that?
@TheMinuteMasters
10 ай бұрын
It’s a soft rolling tonneau by Truxedo. I did a video on it a while back.
@toddgraham7033
Жыл бұрын
Excellent video! I picked up a 93 F150 XLT about 2 months ago. Slowing going thru it to update/repair/modernize the truck. This is going to be a huge help with the tailgate!
@TheMinuteMasters
Жыл бұрын
Thanks man!🤙 I love mine and it makes my truck feel that much more up to date.
@shaunlucky-samaroo688
Жыл бұрын
The price went up overnight
@TheMinuteMasters
Жыл бұрын
Yes, apparently he sold out of his original supply and the supplier is out too. He just switch suppliers this morning and they were more expensive.
@1DjScarface
Жыл бұрын
Hummmm wonder if you upgrade to a bigger shock can it be used on OBS Broncos if it fit under the wiring harness
@TheMinuteMasters
Жыл бұрын
Probably. Definitely worth investigating
@TheFoxShop
Жыл бұрын
Nice!!! 👍👍👌.. just subscribed!!
@TheMinuteMasters
Жыл бұрын
Thanks Jon!🤙 I appreciate it. I’ve been a long time watcher of your channel. By the way, you live in the next county over from you.
@TeamWagy
Жыл бұрын
Does the strut make it harder to put the tailgate back up?
@TheMinuteMasters
Жыл бұрын
Not really.
@timelordnoah5179
Жыл бұрын
The starters aren’t to bad on it. Thanks for the simple video.
@TheMinuteMasters
Жыл бұрын
Thanks man!🤙 that’s a trailer video for the one that premieres tomorrow at 5:30
@thedistracti0n993
Жыл бұрын
Subbed, now please move to Vermont and be my Yoda
@TheMinuteMasters
Жыл бұрын
Thanks man! Hahahahaha!
@scooter12e
Жыл бұрын
What part of Iowa are you in fellow OBS Iowan
@TheMinuteMasters
Жыл бұрын
Des Moines 🤙
@davidperry8046
8 ай бұрын
Will this work on 79 ford truck?
@TheMinuteMasters
8 ай бұрын
Good question! I don’t know. If the tailgate is similar are there mounting holes are in the same locations, I don’t see why not.
@dragonrider9051
Жыл бұрын
I need a new latch, have to fanagle it to get it to stay open so i can close the tailgate.
@TheMinuteMasters
Жыл бұрын
Ah! Yes, the end latches are probably bad.
@d0peshow
Жыл бұрын
Mine got quite a bit better after I hit everything with pb blaster and worked it. Worth a shot anyway.
@christmasdavis2551
Жыл бұрын
Oh that is slick. Definitely getting this. I could literally watch this all day.
@TheMinuteMasters
Жыл бұрын
Yup!🤙
@oscarcervantes6225
Жыл бұрын
New subscriber here you have a lot good videos on your F150 I just picked up a 1994 F150 5.0 stick shift.
@TheMinuteMasters
Жыл бұрын
Thanks man!🤙 I appreciate it. Nice! Very similar to my truck aside from manual transmission.
@Tworko
Жыл бұрын
Would you recommend putting one on either side? Or would one be enough?
@TheMinuteMasters
Жыл бұрын
One is definitely enough. I don’t think it’s a universal side. I think it only fits the side I installed it on.
@Tworko
Жыл бұрын
@@TheMinuteMasters Took your word for it and ordered one. Just got mine in the mail. One of the mounts (top mount) was not powder coated and looks like they went up another ten dollars to 85 for the powder coating. Paid 75 (before they went up in price) for this to be power coated and only get half of it powder coated. Good product yet it sells elsewhere for less, now you might get it from china paying that low. Just sn info post on whet I got from them....oh and I got no sticker! :( (lol joking bout the sticker though ya no sticker) So to recap - $75.00, half powder coated, and ....no sticker :) ...Oh and they went up to $85.00 now.
@emandagoat3417
Жыл бұрын
Where can i buy it?????!!!!!
@TheMinuteMasters
Жыл бұрын
Link in the description!🤙
@aber1711
9 ай бұрын
This seems like a great mod. My only concern if it can handle sitting on the tailgate and still work months down the road. Cool upgrade though.
@TheMinuteMasters
9 ай бұрын
The assist doesn’t support the tailgate. The cables on either side of the tailgate still do that. I’ve had it installed on my truck since early summer with no issues.👌
@aber1711
9 ай бұрын
@@TheMinuteMasters good point. I'll definitely get this.
@aber1711
9 ай бұрын
@@TheMinuteMasters off topic. Do you know the torque specs of 2wd driveshaft to rear axle? Haynes says 90-110 ft lbs but I find it hard to believe its that tight. I found lots of forums saying hand tight plus a little more or 26 ft lbs. Concensus seems to be haynes had a typo.
@TheMinuteMasters
9 ай бұрын
@@aber1711 The four bolts that secure the drive shaft to the axle pinion, I tightened to 90 Ft lbs per Haynes manual. 26 ft lbs seems very light.
@Giantass1
Жыл бұрын
I dont think my comment went through regarding a obs bronco assist, but the site is called gerber design solutions. It mount alittle differently and doesn't require a rivnut to mount either. Hope this helps all the obs Bronco owners especially if your tortion bar bracket broke like mines oof
@TheMinuteMasters
Жыл бұрын
I have see the Gerber Design Solutions assist Kit. I would have bought that one eventually. However, JC Customs sent this one to me for free.😁
@joshuaparnell8891
Жыл бұрын
Nice video love the assist. The cost is not 45 dollars. The kit you have is 75 dollars plus shipping unless theu are offering a discount code not listed. Keep up the good work!
@TheMinuteMasters
Жыл бұрын
Thanks man!🤙 $45 was the bare (no powder coat) kit. This video sold enough of these for his supply to run out. His new. Supplier for the assist was more expensive. He messaged me about it because he was concerned.
@EchoHerr
Жыл бұрын
I just got a 97 f150 and I'm getting ready to start working on it to improve it in just about every way possible. Your channel is great, thanks!
@TheMinuteMasters
Жыл бұрын
Nice!🤙 thanks man! You’re welcome!
@jccustomsmetalfab001
Жыл бұрын
Awesome video!! Thanks again!
@TheMinuteMasters
Жыл бұрын
You’re welcome! 🤙 KZitem ranks videos that I upload based on previous videos. This one’s ranked number one out of 10.👌
@nickengel5971
Жыл бұрын
Standard equipment on a Chevy for years now.....
@TheMinuteMasters
Жыл бұрын
I doubt a 95 1500/Silverado had this.
@AMScotty
Жыл бұрын
Love my 96 f150. Going to be getting this at some point
@TheMinuteMasters
Жыл бұрын
You’ll love it!
@austingray4251
Жыл бұрын
Put that P4 to Work!!!
@TheMinuteMasters
Жыл бұрын
I knew you would appreciate that Austin! 🤙 Best multi tool I’ve owned and I always take it to work.
@MapleMarmite
Жыл бұрын
Nicely thought out fitting kit with that. Definitely a worthwhile upgrade, the way the tailgate normally drops is really jarring if you don’t have hold of it. Another good tailgate update is a tailgate lock on the lift-out side of the hinges. I picked one up on clearance at a parts store recently. With these tailgates rusting out and being so easy to remove, theft of them is going to become a thing, if it isn’t already. 👍🏻
@TheMinuteMasters
Жыл бұрын
It definitely is! Oh for sure! Tailgates are hard to come by now.
@bobtailsthecat
Жыл бұрын
theft of these gates have been going on for decades. Your talking $500+ used
@Aidencmz
Жыл бұрын
Could you elaborate on this or post a link? Not familiar
@MapleMarmite
Жыл бұрын
@@Aidencmz Just Google ‘tailgate lock’ several will come up. It’s the kind that wraps around the lift out end of the tailgate hinge to stop it being lifted out by thieves. Looks a bit like a padlock. Available online or in some parts stores, depending on where you live.
@bobtailsthecat
Жыл бұрын
@@Aidencmz wym
@jamesspivey279
Жыл бұрын
love what you did there and i remember you had changed out your tail gate at one time. would you recommend this with the original tail gate as heavy as it is? it looks like that shock would wear out quite fast.
@jccustomsmetalfab001
Жыл бұрын
I have been running mine on an OG tailgate, for a good while before releasing the kit. That’s what these shocks are designed to do.
@TheMinuteMasters
Жыл бұрын
Thanks man!🤙 This is an OE tailgate from the junkyard. So this is a heavy one.
@oscarpuente2029
Жыл бұрын
outstanding.
@d0peshow
Жыл бұрын
Does it rattle more without the rubber piece?
@TheMinuteMasters
Жыл бұрын
I haven’t noticed any rattling.
@thegaspedal1440
Жыл бұрын
Sweet
@iHeartOiSkanks
Жыл бұрын
will this work on a obs ford bronco??
@TheMinuteMasters
Жыл бұрын
Not sure but a few people have ordered them who have broncos. They are going to let me know.
@iHeartOiSkanks
Жыл бұрын
@@TheMinuteMasters I HOPE IT WORKS, BUT I DONT THINK IT WILL
@iHeartOiSkanks
Жыл бұрын
@@TheMinuteMasters so did it work on their broncos??
@TheMinuteMasters
Жыл бұрын
@@iHeartOiSkanks I haven’t heard yet.
@Acosta-on7do
Жыл бұрын
I saw another kit that helps on the way up. Someone on Instagram is running both kits at the same time and it’s awesome. Can you show us how to do that?
@TheMinuteMasters
Жыл бұрын
That’s cool! Do you know who made that kit?
@user-ef4gf7rr9r
7 күн бұрын
@@TheMinuteMasters Did you ever happen to figure out what this guy was talking about?
@wily3226
9 ай бұрын
I had to to pick this one up
@TheMinuteMasters
9 ай бұрын
Dude! It’s a game changer!
@ryangarner6099
Жыл бұрын
I wish you had a video on how to replace head gaskets.
@TheMinuteMasters
Жыл бұрын
Ah! That’s a good one. Well if I do any top end work, I’ll be sure to film it.
@ryangarner6099
Жыл бұрын
@@TheMinuteMasters that would be awesome plz and thank you lol
@paulrademacher
Жыл бұрын
This is awesome
@TheMinuteMasters
Жыл бұрын
Thanks man!
@zeyad.alkhaldi2837
Жыл бұрын
What is the tire size ?, can fits to manufacture stander ring ?
@TheMinuteMasters
Жыл бұрын
I’m running 31” tires on 15” steel wheels now. My Method wheels are 17” and definitely wouldn’t take a stock tire.
@zeyad.alkhaldi2837
Жыл бұрын
@@TheMinuteMasters good for you , it’s really hard here in saudi arabia to find a replacement part, it cost me about 350 dollars for each shipment 😀
@TheMinuteMasters
Жыл бұрын
@@zeyad.alkhaldi2837 Wow! That’s a lot!
@zeyad.alkhaldi2837
Жыл бұрын
@@TheMinuteMasters unfortunately
@STR8SICCC
Жыл бұрын
Definitely ordering one.
@TheMinuteMasters
Жыл бұрын
Too good not to buy right!👌
@STR8SICCC
Жыл бұрын
@@TheMinuteMasters no kidding!
@josephfleming1666
Жыл бұрын
Would this work for a Bronco as well?
@TheMinuteMasters
Жыл бұрын
Good question. I don’t know for sure. Might be worth testing.
@Giantass1
Жыл бұрын
Yes they have one for obs Broncos, as to the difference between the f150 ones and Broncos i can not say
@josephfleming1666
Жыл бұрын
@@Giantass1 Cool thank you
@josephfleming1666
Жыл бұрын
@Giantass1 Don't see any Bronco ones on the website...
@deeveeance3314
Жыл бұрын
I just emailed the site regarding the one linked, and he replied saying he is positive it will NOT work, but is working on one for OBS Broncos. Really want one.
Пікірлер: 106