Randy nice job explaining how TDS meters should be properly installed and were it make sense to place them.
@LucidComposureUk
7 жыл бұрын
Good job randy! Took a few tips from that I didn't expect!
@FTampa
7 жыл бұрын
I see lots of reefers fighting against Dinoflagellates (including myself) and you just can't find a way to fight this problem doing the right thing. I'm on this battle for more than a year and I would be thankful if you guys can make a video teaching people how to treat it on the right way. Thanks in advance. Big fan of your videos :)
@Bronx19
7 жыл бұрын
Another good video. Question: If you start seeing 1-2ppm on your meter, what is the best way to tell which media is exhausted? I'd rather not replace everything for the sake of it, but I don't want to change the resin only for it to be exhausted because the carbon is no good ect.
@ricardocaceres9988
7 жыл бұрын
Hey are you guy ever going to restock on the RO/DI 6 or 5 stage unit with the drinking water hook ups ? I was ready to purchase one
@PSCThrillSeeker
7 жыл бұрын
Randy, Here's another "How to Topic for you. When making your own T5/LED combo, what the proper spacing between the LED fixtures and a T5 retro kit? The distance between the inside edge of the T5 reflector to the outside edge of the LED fixture?
@PSCThrillSeeker
7 жыл бұрын
Glad you liked it! I think I remember that video, memory is kinda fuzzy! lol
@caves51
8 ай бұрын
Still waiting on an answer about why I’m not getting water pressure to my gauge after the ASO valve to my RO filter but I do get water out of my RO faucet although not a fast flowing as I’d like it to be. ?
@aquamedic8857
8 ай бұрын
Booster pump.
@frankcava8073
7 жыл бұрын
I understand why you might have two TDS meters. One before and after the RO membranes. But where would you install a third sensor and why?
@frankcava8073
7 жыл бұрын
Ok. I get it. One last thing. Wouldnt you want to know the TDS numbers for your water BEFORE any water goes into the unit at all? Say from the tap into the unit. This way you know what you started with and what your final numbers were? You need to have a video on "How to convince your husband, wife, or significant other, that you need an RODI unit"
@lesnewjr
4 жыл бұрын
How do you calibrate the HM digital tds meter? Like the one you have in the video
@drewdula
4 жыл бұрын
What tool are you using to cut the lines for installation?
@BRStv
4 жыл бұрын
Just a cheap RO tube cutter. Well worth the couple of dollars! www.bulkreefsupply.com/ro-tube-cutter-highly-recommended.html
@LXXero
7 жыл бұрын
i ended up adding a 3-way one to my value watersaver+ which already had a 2-way one included. although i kinda wish you guys gave the option for the 3-way one on the value models too. i got 5 now which seems overkill, but now i'm spoiled and i actually want 6. None of this would have started if you just let me buy it with the 3-way one to begin with!!! Haha. Kidding aside, i saw your one video where you showed measuring each of the RO membranes separately on these dual membrane units, and now want one for each RO membrane plus one for both membranes combined. Haha, overkill much? I guess I could just do the math to add the two together, but eh, who needs to do that when you can just have 6 tds meters? water in, post carbon/sediment, post ro each membrane separate plus combined (3 total), post di, 6 in all. maybe some day my TDS metering dreams will come true if I decide to ditch the original 2-way one it came with for a 3-way. But don't mind me - most of your customers probably aren't this obsessed with their RODI system. My water isn't even that bad, 30-70 incoming tds, usually 0 TDS post-RO after tds creep settles. I'm just a numbers freak, apex on everything, in fact i may add an apex flow meter to my RODI some day. we'll see. Too bad using the pm2+salinity probe as a tds meter is so expensive, i'd be doing that too otherwise.
@wildwelshpete
7 жыл бұрын
quick question I have a 3 stage RO system, how can I add a 4th stage to make it RODI? Thanks
@ThePurplePupUwU
7 жыл бұрын
WILDWELSH PETE get a brs extension kit and get some dionization resin
@wildwelshpete
7 жыл бұрын
Gaming universe and electronic reviews thanks for the reply, I will have to find something similar in the UK :-)
@wildwelshpete
7 жыл бұрын
BulkReefSupplyCom thanks guys :-)
@serenabowman2214
7 жыл бұрын
am sure you've already done one of these videos!
@hugoescuadra7888
4 жыл бұрын
Which is the waste line
@BRStv
4 жыл бұрын
If you have a Bulk Reef Supply RODI system, it's the black tubing
@ronaldfields1561
4 жыл бұрын
What is TDS?
@BRStv
4 жыл бұрын
It stands for Total Dissolved Solids. It's one way we test RO water to determine the level of contaminants in it. Since TDS meters are actually conductivity meters, it will only pick up those contaminants with an electrical charge.
@ronaldfields1561
4 жыл бұрын
@@BRStv if I make my own RO water should I get a TDS meter?
@CreepyMonkeyHeadGame
7 жыл бұрын
tomorrow is the day I have to move my saltwater fish to the place I moved into that's 3 hours away bought a giant brute trash to help with moving them wish me luck
@CreepyMonkeyHeadGame
7 жыл бұрын
BulkReefSupplyCom on the biggest idiot on the planet I don't have a net for my fish I was always telling myself to go buy a new one but I always kept putting it off and now it's coming to bite me in the butt😓
@CreepyMonkeyHeadGame
7 жыл бұрын
BulkReefSupplyCom so lucky just got the clownfish out my clownfish Felix is my most tame and first fish I feed him right out of my hand and usually just swims up to it and I pet him every once in awhile it's just my others going to be as easy
@CreepyMonkeyHeadGame
7 жыл бұрын
BulkReefSupplyCom they are all out except one it keeps biting me in and running off and it's only a 29 gallon BioCube the water is almost gone and I feel that I should be more than capable of moving my hands to the other side of a 29 gallon BioCube forecast fish can make it over there plus I had the fish in my hands and then it jumped out and then back into the tank it's aggravating me LOL XD
Пікірлер: 29