JEEP WRANGLER JKU 8HP70 DIY INSTALLATION
This video will be my own tutorial on how i swapped out my Nag1 and replaced it with an 8hp70. A special thanks goes to Todd and Liz over at Jeep Speed Shop for providing excellent parts, knowledge and also their own youtube DIY videos. Thanks For watching!
For hemi swap parts, contact JEEP SPEED SHOP (I have no association to JSS) Just a happy customer.
Amazon Store : www.amazon.com...
correct 8hp70s are from a 2013-18 dodge ram 4x4. (be careful they also have 5 speeds in those years)
correct tcase 07-18 manual and 07-11 autos
Tap for oil cooler. Use a 3/4 16 tap
PCS wiring colors. This is for my 2013 wrangler. colors or instructions could vary.
with a new pcs controller from JSS. you only need to tap into the:
CANBUS
battery
keyed power
ground.
Trans plug yellow wire = keyed power
Green with RED tracer = battery power
NAG1 plug wire Yellow(White) with Black tracer = high canbus. attaches to White /red tracer
NAG1 plug wire Yellow(White) with Green(blue) Tracer = Low Canbus. attaches to white w/grey tracer
TORQUE SPECS:
Complete Valve Body to-Case 14Nm/10 ft-lb
TCM to valve body 10Nm/88in-lbs
Plastic Oil Pan to Case 10Nm/88 in-lb
fill plug 22ft/lbs
Bellhousing bolts 41ft/lbs -50ft/lbs (different sources)
Torque Converter to Flex Plate Bolt 31ft/lbs
Tcase to transmission nut 31ft/lbs
Starter 40ft/lbs
fill plug 22ft/lbs
Camera Used :amzn.to/3KO42ss
Amazon Store : www.amazon.com...
Wolfbox18%off : wolfbox.com/?r...
As an eBay Partner, I may be compensated if you make a purchase
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/n...
License code: ZXHWAOSMKNLGFBUV
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/n...
License code: ZETR6HDNCJ5VLME1
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/a...
License code: CGQUDRG4G3UR2HUE
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/n...
License code: ZNA7RUVSLVTLIZ0L
Негізгі бет How To Install an 8hp70 in a Jeep Wrangler! (JKU)
Пікірлер: 22