this guy is deadass one of the most entertaining youtubers and is super informative
@VincentLawv
4 жыл бұрын
Thanks man, I try to research to the best of my abilities so I can give out proper information (:
@MexicanBatmanGAMES
4 жыл бұрын
Awesome video! Extremely informative and super clear instructions. Cheers
@VincentLawv
4 жыл бұрын
Thanks! I’m really glad I was able to help you out (:
@Teknakill
Жыл бұрын
This gives us confidence to replace a boring steering wheel, thank you and you are a great teacher.
@colten2524
2 жыл бұрын
I love that interior, the black is so clean and all the leather is really nice. Just a treat to look at.
@kelin818
4 жыл бұрын
Thank you for in depth walk through covering will be following this as my walk through with similar hardware.
@VincentLawv
4 жыл бұрын
Of course, thank you for the support! I'm glad it helps you (: Good luck with your install!
@patermitsioss3462
2 жыл бұрын
Hi, i am new to this car stuff and i would really love to know what's the reason behind purchasing a quick release steering wheel. I mean, is it purely for cosmetic reasons or there is some added benefit from using it?
@Numbers123
2 жыл бұрын
Just did my Momo steering wheel installed and also used a Daikei kit like you did. Great video. Simplistic and to the point. Thank you!
@eLroche5
3 жыл бұрын
Hey where can I get that hub? I’ve been looking around but don’t trust many websites. Thank you and great video I’ll be using it when I get all my stuff in
@schlippery1
3 жыл бұрын
So, no more airbag? lol, I thought it was illegal to remove them, but really love the look of the new wheel especially without the plunky airbag!
@darylhayes5961
3 жыл бұрын
I........LOooooooove......my MoMo!!!:)!!!!... their...# 1....handmade in Italy!!!:)!!!!
@alpal360
3 жыл бұрын
How do you like this hub and wheel set up dimension wise? I'm 6ft and the stock wheel is hitting my knees constantly. So, do you find that hub depth and deepness and diameter of the steering wheel to be working well? Great video btw, i'll be following this along exactly.
@cre8tivegarage157
4 жыл бұрын
Great content , glad we found your channel, really looking forward to more , and stay safe through all the crazy going on in the world 🙏
@VincentLawv
4 жыл бұрын
Thank you! I'm keeping up with your budget turbo build as well (:
@jorgestrohmeier6190
2 жыл бұрын
Check out the GT-MAX-1 Steering wheel, might wamt to put it in your car. But you need a Samsung Galaxy S20 phone
@MrGF1582
3 жыл бұрын
Good job dude! Only drawback for me... $239.00 for the Momo! But good job!
@VincentLawv
3 жыл бұрын
Momo is definitely worth the price over cheaper alternatives like NRG! Thanks for the support (:
@thequietkiwi
3 жыл бұрын
There are good enough copies on aliexpress for $30. You just don't get the sticker.
@Robert-lh4um
4 ай бұрын
PLEASE DISCONNECT YOUR POSITIVE SIDE TERMINAL ON CAR BATTERY FIRST. ALSO DISCONNECT THE AIRBAG AND HORN CONNECTORS BEFORE YOU SNIP THE STRING NOT THE OTHER WAY AROUND.
@bumblebea2810
Күн бұрын
link for the hub
@notagain1788
2 жыл бұрын
Is there any links for a 91 miata airbag resistor? I just bought the exact same stuff but I got the nb2 stuff and not the na6 with airbag stuff. Thanks
@JD-NVMND
5 ай бұрын
Hey thank you for the detailed info of the installation. Can you share where you bought the connectors for the horn and resistor
@horizonow1296
7 ай бұрын
can anyone help me find the hub kit he used? i can only find the kit for an NB miata. Are they the same?
@nazimelon6653
4 жыл бұрын
no idea why you were suddenly reccommended but i aint complaining. Really good explaination btw.
@VincentLawv
4 жыл бұрын
A sudden recommendation is a sign to subscribe to keep seeing new videos (: Thank you for the support!
@superspud
3 жыл бұрын
Hey Vincent, wanted to thank you for your videos! I've watched everything I could find about installing coilovers and the Daikei hub in my NA prior to install. During the install I found I would refer to your videos. Clear, concise, not much fluff made for a perfect reference. Went into the installs confident and they turned out great! I do have one question about the Daikei hub. My hub cover seems to leave a 1/2" gap at the back (Bad description) did yours fit perfectly or did you have a gap?
@marnixboot627
3 жыл бұрын
You are the one who really explained to me what to do. To let the leftover enegry go out of the system. So that your airbags won't pop, keep on going with you nice videos!
@VincentLawv
3 жыл бұрын
I'm really glad I could help! No one wants an airbag exploding in their face :p Thanks for the support!
@vincent2491
2 жыл бұрын
Vincent really posted tutorials but doesnt get subs only veiws
@jameselko7232
Жыл бұрын
I'll keep my airbag, thank you.
@gardentools2553
3 жыл бұрын
I completely understand this one and I've got it memorized ...thanks
@PinChE_LoCo
3 ай бұрын
😂 that OH SHIT ! was real real
@christinchan5273
4 жыл бұрын
wheely cool! enjoyed the use of the word torquey boy (:
@VincentLawv
4 жыл бұрын
thank you wheely much! -t o r q u e y b o y
@Rxqzn
Жыл бұрын
Is this legal and will pass mot
@arthurmorgan2914
2 жыл бұрын
This is not a quick release is it
@jameselko7232
Жыл бұрын
Far from the best mod!
@lasvegascrisis
3 ай бұрын
i literally just ordered the daikei hub kit & this is absolutely great for when i go to install mine! thank you
@300whiteout9
3 жыл бұрын
Put a LSD in it and rip that wheel Miatas are tin cans almost lost my life in one
@VincentLawv
3 жыл бұрын
It’s got a torsen in it! I’ll think about ripping it around though (: I’m glad you’re alive and well man, stay safe out there!
@ruingh2570
4 жыл бұрын
Yo nice video man. Dont got a car or anything but very interesting video to watch non the less. Best youtuber ive seen in years
@VincentLawv
4 жыл бұрын
Thanks man I really appreciate the support, maybe your first car can be a Miata (:
@jaconessjaconess7834
2 жыл бұрын
subscribed
@0luc83
3 жыл бұрын
Entertaining and Informative, Subscribed :)
@VincentLawv
3 жыл бұрын
Thank you (: I'm glad you enjoyed it. Welcome to the channel!
@eastonrheaume5828
3 жыл бұрын
Your vids are so high quality and nice keep up the content man I love it
@VincentLawv
3 жыл бұрын
Thanks I spend a lot of time prepping and trying to get the right camera settings & angles! Thank you so much for the support (:
@DylGon_K24
3 жыл бұрын
Hey, I'm planning a similar setup but with a short hub, QR, and a 350mm 75mm deep dish. Was just wondering if your setup felt too close to your face. I'm scared my setup might poke too much.
@icemuzic
3 жыл бұрын
Removing the air bag for an aftermarket SW. I just hope you dont meet any car accident. God bless.
@docaniga7092
Жыл бұрын
I know I’m late but what’s the shift knob been looking for one exactly like that for months
@fernieto1717
2 жыл бұрын
This is great tutorial, I'm about do it for my 90 NA, besides the wheel, what size is the hub and where to get that air bag connector??
@jackgoldberger4258
Жыл бұрын
Great guide. I decided to mimic your set up and referenced your video during install. Informative and very helpful!
@randomcrashingfacility31
2 жыл бұрын
Airbag delete is not a very good idea
@acerusea5156
5 ай бұрын
Very true, but it's better if he had a bucket seat and a 4/5 point harness in his car
@br1flips
2 жыл бұрын
Is that a lock-on odi/vans bike grip on your shifter??
@vladisergeiev7278
3 жыл бұрын
I can't help but see the visual similarity between you and the villain from the original Fast and the Furious. You're like a young Johnny Tran, before things got all messed up.
@quynhanhtranmai449
2 жыл бұрын
Love the video but the camera focusing on his face instead of the wheels and wires triggers me so much lol
@GaryChen
3 жыл бұрын
Love the install video! You should look into a quick release or tilt up in the future 👌
@VincentLawv
3 жыл бұрын
Thank you! I really appreciate the support (: I've been looking into a tilt hub but honestly, they're pretty expensive & I'm just trying to budget the build a little bit right now to focus on maintenance things like brakes! After things get settled I'll definitely look into different hubs & steering wheels.
@garagism5736
4 жыл бұрын
Looks cool man! Hoe much mm is your steering wheel and hoe is the view of the gauges
@VincentLawv
4 жыл бұрын
Thank you! It is a 350mm wheel with 88mm Dish. The hub is around 80mm, so it brings the wheel towards me about 168mm which is around 6.6 inches. I can see all the gauges properly but because of a more upright seating position, the wheel just barely clips off the top of the oil pressure gauge. If I lean the seat back a little then it’s perfectly find. I hope this helps! (:
@garagism5736
4 жыл бұрын
Vincent Law thanks man! I was debating of buying a 330mm and 350mm but I think Ill go for the 350mm
@robertj8851
3 жыл бұрын
You could have taken off the airbag and have the steering wheel
@Mrennnn
3 жыл бұрын
good vid bro much needed info 🤙🏼
@VincentLawv
3 жыл бұрын
Thank you bro! I'm glad my video was able to help you out (:
@JB-ge3gi
2 жыл бұрын
Manneeee you gottaasss a keeper for getting you that wheel😭😭
@CoreyWBaker
2 жыл бұрын
What are those side mounted cup holders!
@JoshuaToshiKolita
2 жыл бұрын
the gear knob is soo cool, do you have the link for it
@justabruv9526
3 жыл бұрын
Where can i find that cup holder interior plastic??
@EmmanuelCruz_
3 жыл бұрын
Thank you so much this very helpful,btw what shifter do you have
@VincentLawv
3 жыл бұрын
Of course! I’m glad my video was able to help you (: Also, it’s a Bam Shift Shorty shift knob!
@EmmanuelCruz_
3 жыл бұрын
@@VincentLawv thank you,you just gained a new subscriber
@VincentLawv
3 жыл бұрын
Thanks for the sub! I really appreciate the support (:
@EmmanuelCruz_
3 жыл бұрын
@@VincentLawv no problem glad you appreciate it🙏🙌
@georgelam-yoyo4281
3 жыл бұрын
do you have a link where to get that steering hub/ thanks
@amitnaidu8263
3 жыл бұрын
How can I get this steering can u plz tell me
@stephensearle1578
2 жыл бұрын
Do you know where to get the horn and air bag wires?
@KayMayo
3 жыл бұрын
Where can I get a resistor like that? Love how easy that is
@jordancarroll9219
Жыл бұрын
2:36 me every time I work on my car 😭
@pirahna.x
2 жыл бұрын
Can you do this for your first mod?
@LeviticusFigglebottom
2 жыл бұрын
This was very helpful 👍
@aidandunn6989
3 жыл бұрын
Wow this is very well made and super informative, when I get my Miata I will watch this to install my steering wheel
@AsapTone
2 жыл бұрын
what shifter is that in the video?
@jesseblosser4653
3 жыл бұрын
how deep is the dish on this steering wheel?
@haratiiaswegobandi746
3 жыл бұрын
Great info, subbed.
@ethan_swindell
3 жыл бұрын
How much for all thus ?
@meese1k
3 жыл бұрын
can you still reach the stalks?
@Josh_Judge
3 жыл бұрын
This is a good ass walkthrough, thx
@meese1k
3 жыл бұрын
where do i buy the hub?
@mr.nobody9646
3 жыл бұрын
Does the blinker turns off automatically now?
@VincentLawv
3 жыл бұрын
Yep! I didn't mess with any of the internals of the clockspring or switches so it worked perfectly fine after (:
@lexstockton2451
2 жыл бұрын
Hi Vincent, Old Miata fan here. Nice job on the video, I’ve had the wheel off several times but didn’t know how an upgrade would be done. You cleared that up, thanks. Typically, I have a picky complaint, the air bag is retained by four 10mm nuts, not bolts. Really a minor thing, your video is otherwise, clear, well spoken and very informative. Thank you for being well above the KZitem average.
@franktorrez6356
3 жыл бұрын
Where can I find this same set up on video for the nb2 I need to know
@VincentLawv
3 жыл бұрын
I'm not sure about video walkthroughs, but here's a forum writeup for you about the hub! revlimiter.net/blog/2013/11/nb-steering-wheel-install/ I hope this helps you out (:
@riplugo
3 жыл бұрын
Would a quick release work with that hub?
@VincentLawv
3 жыл бұрын
Yes! It should work with that hub, but the only issue is that the hub is already around 80mm already. Adding a quick release would end up making the whole assembly pretty tall which means the steering wheel will be super close to you. If you planned on getting a deep dish steering wheel then the wheel might end up right at your chest. I recommend getting a shorter hub to compensate for the quick release (: Check out the NRG short hubs or Works Bell short hubs. Maybe even the NRG low profile quick release as well! Good luck!!!
@pabloporras4169
3 жыл бұрын
Can u please share the link for the hub?
@VincentLawv
3 жыл бұрын
Here you go (: Just make sure you get the right model/size for your miata www.projectgla.com/main/product/daikei-steering-wheel-hub-1990-2014-mazda-miata/
@handle690
3 жыл бұрын
Vincent is this the same for NB?
@handle690
3 жыл бұрын
I subbed btw bro keep up the good work!
@chiefbeef2059
3 жыл бұрын
Did u feel a noticeable difference in size of the aftermarket wheel from the oem wheel?
@VincentLawv
3 жыл бұрын
Honestly, not really because the stock NA miata steering wheel size is 355mm & the steering wheel I got is 350mm. A 5mm difference is barely noticeable to me (:
@thequietkiwi
3 жыл бұрын
If you struggle for legroom, a wheel around 300-320 will make a noticeable difference. You can also fit a spacer to bring the wheel out from your knees a bit more.
@pubgspecter6705
4 жыл бұрын
Does this hub work with a quick release? If you bolt the quick release onto the end of the hub
@VincentLawv
4 жыл бұрын
I believe it should work, but the issue is that this hub is pretty lengthy. It's around 80mm long (~3 inches) by itself. If you get a deep dish wheel like I did and add the quick release, you probably won't be able to reach your blinker/wiper stalks easily. As of now, with only the hub and the deep dish wheel, I can only reach the stalks if I loosely grip the wheel with my thumb and stretch my hand out. If you want to put a quick release on top then you should look at the bell works short hub (~50mm) or NRG thin version quick release hub (~30mm). Make sure to do your research on specific parts and figure out measurements so you know exactly what you're looking for (: Good luck!
@pubgspecter6705
4 жыл бұрын
@@VincentLawv I appreciate it! I was looking at this hub because it came with the airbag light defector
@VincentLawv
4 жыл бұрын
@@pubgspecter6705 Then I would definitely look at the works bell short hub, it's supposedly a plug & play kit and it's basically made to be used with quick releases!
@XDSMEDIA
4 жыл бұрын
What is the link to the hub
@VincentLawv
4 жыл бұрын
You can get this hub yourself from either of these links: www.projectgla.com/main/product/daikei-steering-wheel-hub-1990-2014-mazda-miata/ rev9autosport.com/daikei-boss-hub-kit.html Make sure you get the right model for your car, there is the airbag version and the non-airbag version. This is because the diameter of the steering column differs from miatas that came from the factory with steering wheel airbags vs without steering wheel airbags! Enjoy (:
@nolahahnshouse3389
4 жыл бұрын
You on Instagram bro?
@VincentLawv
4 жыл бұрын
I have an instagram, but I don't post photos often. You can still go ahead and check it out @vincentlawv (:
@fungusamongus69420
3 жыл бұрын
OMG we have the same hub and wheel. Even the same coilovers! Your coilover installation vid really helped!
@VincentLawv
3 жыл бұрын
Yessir!! I honestly love this wheel color & design, & these coilovers are amazing for the price as well! I'm really glad that my video could help you out (:
@impovershedman7394
3 жыл бұрын
Do you know where could I find that Daikei Boss hub?
Пікірлер: 123