I recently installed this exact carport, thank you for the video. Just a useful tip/suggestion for installing the roof panels, was actually my wife's idea. Place some 2X6s across the bed of your truck and back it into the carport. Provides good height and a stable platform that positions you above the roofline and enables you to apply much more leverage and stability driving the screws without having to move your ladder constantly. These screws don't self tap so easily sometimes unless you are square on them with adequate pressure. I can tell you from experience that it sucks when you are on a ladder tring to apply pressure and the screw slips.
@TheDishDoc
2 жыл бұрын
Great video, thanks for posting it. One comment. You mentioned "the anchors expand when you hammer them in" Actually they wedge into place when you tighten the nut. As the threaded portion pulls out of the hole, the sleeve slides down the wedge, expands and locks the anchor into place. I'm going to purchase the 20 X 20. Your video was very helpful.
@JedsGarage
2 жыл бұрын
Thank you.
@angelanuccio2167
Жыл бұрын
By drilling the holes for anchors with the frame in place the water went inside of it and will rust out faster , i would have marked all holes moved the frame out the way then drilled, that's whats great about these videos, its like a heads up before you do your own build, thanks for sharing.
@JedsGarage
Жыл бұрын
Thanks for the input.
@eternalmercenary463
Жыл бұрын
I've drilled a lot of holes at work for anchors, and I was never taught to use water to cool the bit. Also, I was taught to put the nuts on the lag bolts before hammering into the concrete. You could mess up the threads hammering them in, and then you won't get the nut on.
@JedsGarage
Жыл бұрын
Thanks for the feedback.
@JiroProject
11 ай бұрын
Little do you know, the top of the stud wasn't straight up thread. He was fine without doing so.
@myutube1960
2 жыл бұрын
Excellent, explanation 👏 Today I purchased this same carport from Lowe's $ 1,799 plus tax & $ 79.90 delivery fee. I will be assembling it when they deliver to me. Your vídeo will help me a lot. Thank You, for sharing!
@tonybalz2726
Жыл бұрын
I just installed a 10 x26x12 RV carport. Installation went great. It is securely anchored into my concrete driveway. I am concerned about it's ability to withstand strong winds since its higher than it is wide. The problem is that I can stand at one end and slightly push on the wall supports and watch the intire structure shake. I invision this thing wobbling during a thunderstorm and breaking free from the ahchors.......or simply having it fall sideways. Is there anyway to cross brace the unit to give it more structure stabilty?
@JedsGarage
Жыл бұрын
Installing more panels on the sides will help.
@jjmac1973
Жыл бұрын
EMSEAL does the job for sealing the joints for those looking
@gbaker9295
2 жыл бұрын
This is very helpful. The other tutorials are too generic and don't give tips or subtle hints on doing this right. Thank you
@JedsGarage
2 жыл бұрын
You’re welcome. Thank you.
@lorih1364
Жыл бұрын
How much does it cost
@lorih1364
Жыл бұрын
How much does it cost
@gbaker9295
Жыл бұрын
@@lorih1364 mine cost $1100. 16'
@rayray-yw5tx
22 күн бұрын
Thanks great video. Looking to install one and was not sure how. But your video showed me I can do it myself.
@kalburiumstormbreath
Жыл бұрын
Hahaha the kid scooting by "yeah keep that in mind" 🤣
@DarkKnight-ym6nc
2 жыл бұрын
Great video, I like the rope trick to see if the bars are straight. I am buying one this week at Lowes.
@JedsGarage
2 жыл бұрын
Thanks for watching. Glad I could help. Good luck.
@TaylorOriginal352
2 жыл бұрын
Could you cut the legs if you wanted? To make it shorter? I live in a hoa and park my boat in backyard and want something like this but idk how high we can have things go over our fences
@JedsGarage
2 жыл бұрын
Yes, you can cut the lower part of the legs off and they will still fit over the ends sitting on the ground. You will just need to drill new pilot holes for the screws.
@NormStrauss
3 ай бұрын
Looks like a great product. One concern for me would be water drainage. Do you see anyway to install gutters on it to direct the water to one end?
@SlimNubster
2 жыл бұрын
Excellent and informative video. Thanks for recording this.
@edmallon2851
5 ай бұрын
By code you need to be 36" from your electrical panel
@JedsGarage
5 ай бұрын
Correct.
@rayonwilliamssportsandfun2106
4 ай бұрын
Need a front rib replacement for a 12x20 carport shed . Do they sell replacement parts and how to find them?
@gotit1303
3 ай бұрын
Did the beetle tape come with carport? How long did it take to install? Want to get the 20x20
@JedsGarage
3 ай бұрын
Yes. Couple Days
@blitz0138
Жыл бұрын
I wonder how you could anchor this on a gravel driveway
@JedsGarage
Жыл бұрын
Great question. Use Rebar anchors or rebar stakes. You may need to move the gravel out of the way where you are hammering them in. Then move the gravel back in place once they are hammered in.
@luckymex58
2 жыл бұрын
You must have 3 foot of working clearance in front of that electrical panel
@JedsGarage
2 жыл бұрын
Yeah, I know. I had no where else to put it. 😅 I have it removable though and will remove it when we move and before an inspector flags me for it.
@piratetaylor29
2 жыл бұрын
Your audio level is extremely low. We can bearly hear you.
@JedsGarage
2 жыл бұрын
Thank you for letting me know
@markhetz1119
Жыл бұрын
It won’t blow away WHATS the weight ….hurricane Saft ?
@kimnangseng3876
10 ай бұрын
Thank you for your video. Was this install by one person? Also, trying to gauge the time it took. How long did it take start to finish?
@JedsGarage
10 ай бұрын
One man job. Took about 2-3 working days.
@kimnangseng3876
10 ай бұрын
Full 8 hours days?
@derrickwolter1
Жыл бұрын
Great video, just curious if you installed a rain gutter?
@JedsGarage
Жыл бұрын
No sir
@timknight6258
2 жыл бұрын
Cool Video. I am getting ready to buy one of these from Lowes. The same size as yours. Should be quite easy. Great job...!!
@JedsGarage
2 жыл бұрын
Thank you.
@mrodrigo3864
Жыл бұрын
Great job I’m thinking of getting the exact car port , height? In the middle
@Remodelaholic
Жыл бұрын
Jed, how did the roof hold to last winter with all that snow?
@JedsGarage
Жыл бұрын
Great question. It did surprisingly well.
@gigeo48
8 ай бұрын
im wondering what the small squares on the ground go when u put up the arches
@Nuclearwinter100
2 жыл бұрын
I see you are in Utah, I am in ogden looking to purchase this or a versatube model
@lophan5749
5 ай бұрын
Good job on the video. I bought one come with no manual!
@suguride
Жыл бұрын
Awesome video Jed, thanks for the walkthrough.🤙🏾
@martinneps9387
Жыл бұрын
What is the whitest one That they make, please Comment back and let me know thank you very much
@JedsGarage
Жыл бұрын
To be honest I’m not quite sure on that.
@kikosol24
2 жыл бұрын
I really like your video!!! Thanks for sharing it. Thanks for your time!!!
@JedsGarage
2 жыл бұрын
Thank you.
@1ify1
Жыл бұрын
Thanks for the video....very informative!
@camaro67rsss67
2 жыл бұрын
Very informative video, How long it took you to put it all together ?
@JedsGarage
2 жыл бұрын
I am usually really slow and careful so like a couple days. Not too bad though. Just have a good drill.
@camaro67rsss67
2 жыл бұрын
@@JedsGarage I just put mine together, thanks to your video. 👌🏼
@baylordude9225
Жыл бұрын
Are the rails pre-drilled to match the pre-drilled holes in the roofing panels?
@JedsGarage
Жыл бұрын
Nothing predrilled but the screws they provide drill in pretty decent.
@robertfish2906
Ай бұрын
Very informative. Thank you.
@JedsGarage
Ай бұрын
You’re welcome good sir. Thank you
@larsonza812
2 жыл бұрын
Can you share the anchor sizes that you used? Good video, sir
@MinhLe-vj9ij
2 жыл бұрын
How and where I can purchase a car port like this ? and how much it costs ? I really appreciate your help. Thank you.
@JedsGarage
2 жыл бұрын
Online on Walmart website. I paid $1375 they will deliver
@JeannieHart
2 жыл бұрын
Did you have to tilt the port at all so that the water flows out?
@JedsGarage
2 жыл бұрын
Thank you for the question. The port will follow the slope of the ground you set it on. The more the slope and the flatter the ground the better it will drain but it drains pretty good even if you neglect these guidelines.
@gfaraghan
2 жыл бұрын
@@JedsGarage If you build on existing concrete like Jed, check the slope first and build the roof with the panel overlaps stepping down in the direction of flow. If you want ALL the water to come off a particular end, slope it that way first.
@piratetaylor29
2 жыл бұрын
Can you tell us if Arrow has a variety of sizes to select from? From say a single bay 10' x 10' on up.
@JedsGarage
2 жыл бұрын
Yes, several different sizes to choose from from the Walmart we site I purchased mine from.
@hopewolfe1085
Жыл бұрын
Great video thank you to the point
@thecount1001
Жыл бұрын
Hi Jed. i'm looking at this exact product. couple of quick ones if you don't mind. a) how is it holding up a year later and are you happy with it? b) i'm 6 5, and i think they may sell an extension to make it 2' taller. how tall are you and is it tall enough for you? i would be parking a Ram 1500 under it. many thanks.
@JedsGarage
Жыл бұрын
It’s held up great. Very happy with it. I’m 6 2, plenty tall for me.
@thecount1001
Жыл бұрын
@@JedsGarage many thanks.
@chuckb9867
11 ай бұрын
@@JedsGarage I just wanted to thank you. For the video. I'll give you a tip. Use fluid film to lubricate your drill bit. It sold at Napa and a spray can. It works awesome
@hookingwithhubies7337
2 жыл бұрын
what size nut driver bit did you use?
@ChrisGrove-ug1gf
Жыл бұрын
How did you fasten roof by the house
@JedsGarage
Жыл бұрын
I had enough room to squeeze my drill in there. Good question though.
@clsalcedo99
2 жыл бұрын
Great video tutorial 👍🏼
@finbin8541
2 жыл бұрын
Did you have to get a permit for something like this?
@JedsGarage
2 жыл бұрын
No. Not usually.
@NoGabagoolForYou
2 жыл бұрын
Is the frame tubing 2x2 or 2x3?
@JedsGarage
2 жыл бұрын
2x2
@redpine8665
Жыл бұрын
Going to be building one coming up. Great video. What was your technique in raising the frame sections by yourself?
@JedsGarage
Жыл бұрын
This size carport the frames were not really big so I just stood them up myself and slid them on the opposite ends. Pretty easy. For larger carports, you would need at least two people to do the same job.
@Logjam5
2 жыл бұрын
Thorough explanation, thanks for posting.
@JedsGarage
2 жыл бұрын
Thank you.
@jessieperez9540
Жыл бұрын
Look great how long did it take to install?
@JedsGarage
Жыл бұрын
I built it slow. Probably 2-3 working days. By myself.
@ThongbayChanthanalay
28 күн бұрын
👍👍
@BryantAvant
2 жыл бұрын
Did the port come with the tape?
@JedsGarage
2 жыл бұрын
Yes
@mattMcLovinisbae
2 жыл бұрын
good water dip advice
@JedsGarage
2 жыл бұрын
Thank you.
@jjualvare
2 жыл бұрын
How much wind can it withstand before it's damaged?
@JedsGarage
2 жыл бұрын
We’ve had several high wind storms blow through and it does really well. Just make sure it’s anchored well and you shouldn’t have any problems.
@1990notch
Жыл бұрын
Arrow says it can withstand 35 lb snow load and 100 mph winds.
@carrascochavez3902
Жыл бұрын
Where did you get it?
@JedsGarage
Жыл бұрын
Walmart online
@carrascochavez3902
Жыл бұрын
@@JedsGarage Thank you buddy, I really need one of those because I have nothing!
@fathercubed769
2 жыл бұрын
Is your concrete slab leveled?
@JedsGarage
2 жыл бұрын
Not really. It’s off a few inches. I shimmed the carport some at the end.
@fathercubed769
2 жыл бұрын
@@JedsGarage what did you use to shimmy? Looking to build a 20x30 in my backyard but concerned about the grade my concrete has
@romo7575
2 жыл бұрын
Price ?
@JedsGarage
2 жыл бұрын
With tax and shipping between $1300-$1400. Purchased through Walmart online.
@romo7575
2 жыл бұрын
Jed’s Garage thanks
@UtubeAdviser
2 жыл бұрын
Is way cheaper to buy a sunshade
@56igadget
Жыл бұрын
You are comparing apples to oranges
@donwatson6865
Жыл бұрын
Thanks for doing this video. I just finished building my 10x20 and your video was way more helpful than the lame instructions that came in the box. The only thing that I would add is that anyone building one of these needs to make sure to have a decent driver with two to three batteries to rotate through. This build has a shit ton of screws.
Пікірлер: 112