How is the Velcro still holding up? I just bought one and I plan on using the same method
@benjaminreaves2555
3 жыл бұрын
Awesome product bro
@seb1632astian
4 жыл бұрын
Nice video, what did you use to glue velcro to the glass? No ghetto!!
@orangehammock
3 жыл бұрын
this vid should have 1m views...there's a ton of applications for this velcro shit
@1hemi843
3 жыл бұрын
Definitely finna do this
@freddievara8649
Жыл бұрын
Still on 8 years used 15 pound out door
@dissociatedtv373
2 жыл бұрын
how well did this hold up in the rain?
@malmansoori2384
2 жыл бұрын
Bro I been using this for a year now this thing is incredible!!!
@ziegenarty6188
3 жыл бұрын
The Velcro still holding strong?
@gonzoaesthetics8796
3 жыл бұрын
Yes!
@malmansoori2384
2 жыл бұрын
For anyone struggling to find the tape secret word “reclosable fasteners” 😂 ur welcome
@george4u1960
3 жыл бұрын
I found a better much better idea to make them stick on the window. Because mine would not stick on the right side even with 3M tape. I purchase some wide velcro industrial stick. And they worked like a charm. It's even waterproof.
@BHRISKY
3 жыл бұрын
I can confirm that this method is way better and surprisingly a huge help, I told my people I was gonna use Velcro and they thought I was high but once I installed my louver to my camaro, it was perfect, thank you so much for this!
@larrymiller2815
3 жыл бұрын
So can confirm it to!!!! Not moving at at all!!!!
@Supermanwallace70
3 жыл бұрын
@@larrymiller2815 how long have you had it on there I’m going to install mine with Velcro today
@larrymiller2815
3 жыл бұрын
@@Supermanwallace70 Just did it last night! Those sticky tape brackets would not stay stuck to my glass after I pressed it down and I cleaned it with winder and alcohol and I used an adhesive promotor.
@voidtv8518
2 жыл бұрын
How is it holding up now??
@BHRISKY
2 жыл бұрын
@@voidtv8518 dude if I can show you I would , still on tight 👍🏽
@jangofresh1019
5 ай бұрын
4 years later, how has it held up? Is it still solid? Thinking about putting louvers on my challenger, but hesitant because I don't feel like creating a pop-off road hazard lol
@andiorl
Жыл бұрын
you didnt include removing it. Is it difficult to remove? Otherwise this is an excellent idea.
@freddievara8649
Жыл бұрын
Did this to my 2015 camaro works great
@fortyninehike
Жыл бұрын
Lol “Financial Mistake”. I call mine “Wreck-less Finance”
@janelmcwhirt899
3 жыл бұрын
The Louvers I have have a kind of “lip” and not enough width on the sides for a strip of velcro. Do you think using the plates and putting the Velcro directly on them would work? Or would it not sit flush to the window...? I figured it out! Ty! Thank you for the video!! Velcro for sure!
@mcjrocker
3 жыл бұрын
Can confirm that this works perfectly! Watched this and CT Hellcat’s video and bought a generic brand roll of this Velcro from Amazon for $8. Thanks!!! 🔥🔥🔥
@memesnmusic9558
3 жыл бұрын
Any link for the tape you got??
@mcjrocker
3 жыл бұрын
@@memesnmusic9558 yep here it is
@mcjrocker
3 жыл бұрын
@@memesnmusic9558 they keep taking down the link, just search Denser 1 Inch Hook and Loop Tape Sticky Back on Amazon you’ll see it
@jewelquinones452
3 жыл бұрын
@mcjrocker is it any good in the rain?
@mcjrocker
3 жыл бұрын
@@jewelquinones452 yes I have had them on for about 3 months now and multiple days of rain and they haven’t budged one bit.
@Wolfie42069-
3 жыл бұрын
Honestly I love most louvers, especially on 80s-90s cars
@nolonger1410
3 жыл бұрын
Thanks, Im gonna do this for my mustang
@dougcreekmore3930
Жыл бұрын
Can you still get it off to clean the window!
@unlawfulorder2127
4 жыл бұрын
Glad I seen this. Gonna get some before I put my new ones on. Only thing I would add is putting the nut on over the bolts still so the holes don’t show.
@johnnycage5513
Жыл бұрын
is that velcro?
@CINDAAA
2 жыл бұрын
Hmmmmmm I have some metal zakustech louvers with some 3M tape but I wonder if this would work better
@ghostbro6376
3 жыл бұрын
Would it also work for the textured plastic window louvers?
@3monthstogreatness805
3 жыл бұрын
How is it holding up? Thinking about doing this rather than 3m
@WestsideWoo
9 ай бұрын
Thanks for the hack. I just bought the rear window louvers and it didn't come with the hardware. So this just saved me the hassle of call the company and waiting for a response. Thanks.
@samanosukeakechi4388
2 жыл бұрын
I've already tried velcro tape, along with adhesives cuz they weren't sticking probably because of the heat. Everything I have used have been melting off, louver warping from the fkn heat. So now I'm trying rtv silicone to seal the seal, hopefully. Next will be epoxy... damn. My louvers brackets have came off, except the velcro around it still holding on barely... it'll get better when it cools, but still not strong. Sucks cuz I like the louvers that much.
@iridiclesrominius7824
4 жыл бұрын
Huge help bruh, thank you
@franchisetaylor3889
2 жыл бұрын
So why don't you remove it to show how easy it is to remove
@malmansoori2384
2 жыл бұрын
It is easy
@Arrakiss20
2 жыл бұрын
Seriously one day after i put my louvers on, left side started to peel off. Those stickers are Ffcking joke. Im going to buy this as well. Used that on my license plates and it hold like hell.
@matthewschmitt2454
3 жыл бұрын
Thanks for this! I would never buy louvers for my Z because I knew how shitty keeping them on glass was. This is a great idea, I ordered mine after seeing this, for both the rear windshield and rear side louvers. I will suggest that people use a liquid adhesion promoter prior to putting down any tape or dual-lock Velcro, but this was a great way to attach them! Thanks again!
@larrymiller2815
3 жыл бұрын
I used a liquid adhesive promotor today and they still did not stick! When I switched to the Velcro as soon as I pressed them in place they stuck and will not move! No vibration at all!!! Great trick!!!
@thatguy-ve6mb
3 жыл бұрын
So even with the velcro did you still have to bolt on to the window on the corners?
@oceanrichardson4674
Жыл бұрын
Great to know because ima buy a mach 1 and want to put lover’s on it too super helpful had to save this video when I get it thank you for the helpful advice keep up the great work
@Continental719
3 жыл бұрын
Mines didn’t. I have a 1990 Jetta coupe. I would have went with Gorilla tape
@idontdokick
2 жыл бұрын
Where do gaskets go? They’re like washers but squishy
@Detroit-he2pm
2 жыл бұрын
Have you had any problems with it after going through a car wash?
@BHRISKY
3 жыл бұрын
No problems if you go above 90 mph? How’s it holding up?
@MM-jl7qu
2 жыл бұрын
What louvers are those? Can you please provide link. Also, do the louvers come in a plastic finish or did you paint them?
@Detroit-he2pm
2 жыл бұрын
Where did you buy that velcro again?
@nelsonricardomontalban1780
2 жыл бұрын
How's the visibility at night with the louvers?
@dougcreekmore3930
Жыл бұрын
Your car may not be a hellcat but it's badass bro!
@kingswadankle3924
3 жыл бұрын
Yo bro this video helped me tremendously! Just installed mines today and I’m loving the results. Perfect for removing to clean my windows
@arthurr.borquez7275
3 жыл бұрын
The other trick is too . Put the glass part on Oliver site and then peal of the tape and lay it down on the window correctly. I would suggest doing it with two people, when you place it down on the window. The cut the bolt top off and JB weld the washer and fender together and then put Velcro on the louver .and on the bottom side of the fender washer. so then it mimics like it’s actually mounted with the hardware . And in reality the hardware is JB welded to each other. and Velcro to the louver system.
@ronaldwallace1164
2 жыл бұрын
Thank you very much for the information it's very helpful
@MrRobefenix
2 жыл бұрын
I have to do this.!!! Thank you for sharing. 👍
@benjaminreaves2555
3 жыл бұрын
It do work I use it every time I put one on my car
@smokingyoung2146
3 жыл бұрын
Did u glue them on ??!
@ThrashMetalAJM
3 жыл бұрын
Do you think one roll like that one is enough for the whole installation?
@gonzoaesthetics8796
3 жыл бұрын
Yes
@gonzoaesthetics8796
3 жыл бұрын
Just space it out
@reyes-rn8wu
3 жыл бұрын
Can you wash your car and wet the velcro with no problens?
@lduran10
2 жыл бұрын
Any link for the product?
@lepequenosaltamontes
3 жыл бұрын
Have you gone thru an automatic carwash with it?
@benjaminreaves2555
3 жыл бұрын
No I used adhesion promoter on the window first
@DrAbominous
3 жыл бұрын
Grabbing some right now! Thanks dude!!
@adamnmegan4619
3 жыл бұрын
How much comes in the kit you bought
@jewelquinones452
3 жыл бұрын
No problem with rain?
@layzy24
2 жыл бұрын
1:44 link?
@layzy24
2 жыл бұрын
How has the velcro held up after all this time? Has the weather and deterioration made the strength of the velcro any weak? What the fastest you've driven with this?
@gonzoaesthetics8796
2 жыл бұрын
The Velcro has held up really good I’ve gone up to 90 mph not like the frs is fast but overall it’s great!!
@michaelvarela3537
3 жыл бұрын
Idk im not sure i used gorilla mlunting tape 60lbs instead of 10 and still wont stay in place.
@ernold4724
2 жыл бұрын
I’m having the same problem did you end up buying this Velcro ??
@smokingyoung2146
3 жыл бұрын
Did u glue them on ???
@yourfilipinomico
3 жыл бұрын
Would rain or snow effect the Velcro?
@george4u1960
3 жыл бұрын
The velcro is better
@dhattboijuju7243
3 жыл бұрын
Link?
@dimps86jl
4 жыл бұрын
After all this time, how do you feel about the louvers now?
@DavidRodriguez-dd1gk
3 жыл бұрын
Haha I go chino, Ay cochino haha
@skinnydefender5519
4 жыл бұрын
Which are those?
@forgetfulyoseph
4 жыл бұрын
Looks gonzo still waiting for you to get a motorcycle 🏍
@seth1852
4 жыл бұрын
I stay in LA are louvers legal? I've been wanting to buy some
@gonzoaesthetics8796
4 жыл бұрын
Blown_MattyB yes there totally legal!!
@emilianoalonzo9394
3 жыл бұрын
Is it still good?
@mcssc5
4 жыл бұрын
TY!
@battusai6148
4 жыл бұрын
will you ever buy pandem v3 ? ♥ lime green #pandem yea #do you have instagram?
@gonzoaesthetics8796
4 жыл бұрын
Battusai tbh I need to fix somethings first but I don’t think so I’m all about being different let’s see what the future has in store 💯
@gonzoaesthetics8796
4 жыл бұрын
Battusai @aesthetic_gonzo
@hobosavage6187
4 жыл бұрын
how's the louver now on high speeds with the rattle?
@gonzoaesthetics8796
4 жыл бұрын
Jaime Blanco no issues what so ever 👌
@leonardogutierrez845
4 жыл бұрын
literally just finished watching your other video and I was bum to find out that it didn't work for you, HOWEVER, thank god i came across your other video! Definitely gonna try this out! Legit video bro
@gonzoaesthetics8796
4 жыл бұрын
Leonardo Gutierrez thank you 🙏🏻 I appreciate all the support 💯
@carllewis166
3 жыл бұрын
Did you put the clips with the nuts back on? Or just the Velcro and it didn’t fly off driving in the highway?
Пікірлер: 105