I watched this video (and your Denali SoundBomb video) several times before trying it myself this weekend. Both videos were key to getting the job done [reasonably] quickly, and with great results. Thanks so much for posting these videos!
@ADVCityGuy
7 жыл бұрын
Jeff Wilson thanks Jeff for the feedback.
@ecv4647
7 жыл бұрын
Nice Install, Looks like you did it the rite way very pro. Saved a lot of Green too.
@ADVCityGuy
7 жыл бұрын
+Eric Van Tilbury Thanks!
@cabrassobreruedas
7 жыл бұрын
Congratulations! Very nice video and great work!
@eyalgolan26
7 жыл бұрын
Very professional video excellent step by step & thank you for the soft music, definitely will get a set....thank you.
@ADVCityGuy
7 жыл бұрын
Eyal Golan thanks
@MTZL2323
6 жыл бұрын
8 minutes of you trying to zip tie a relay to a frame. And dismantling half your bike. TIP: don’t take anything off, look up the front of your bike and you’ll see that same bar. Run your zip tie without the relay through the frame and fasten one click. Next place your relay between the zip ties and hold in place with one hand while maneuvering the zip ties in place over the relay with the other. Then tighten zip ties with one hand while holding the relay with the other. 5min part of the job tops.
@MTZL2323
6 жыл бұрын
Good informative video though. Don’t mean to be a troll. It just made me cringe on how hard you made that look.
@ADVCityGuy
6 жыл бұрын
I hear what your saying. After installing these lights, I’m much more aware & better informed. At the time, there were no install videos. Now I can knock this same install out in an hour.
@lm8670
7 жыл бұрын
is there a video about taken off the OEM Aux FOG ligths and using the same wiring install clearwater or any other brand???
@flat6fever680
5 жыл бұрын
@Bruno Gianelli That being said does anyone know the stock AUX LED light wattage or power draw?
@nbramsey6719
5 жыл бұрын
Nice explanations. Thank you. How do you know which wires from the relay are for right versus left lights?? Asking cuz the Clearwater Canopener can flash left or right lights alternating with turn signals.
@ADVCityGuy
5 жыл бұрын
Hi, it’s been awhile since I installed these, but I believe the wires are color coded for each side.
@ronleon62
4 жыл бұрын
Watching this video made me realize I do not need the lights that badly.
@disaar3679
6 жыл бұрын
I'll go through this pain one day, I think I'm going to hold on after watching this video lol
@lkazanov
7 жыл бұрын
Very nice, which bracket did you use? Their web site lists many different bracket options.
@sahlanmail3399
7 жыл бұрын
It all depends on where u want to mount the lights. On the OEM crashbar there 2 diameter 20mm or 25mm.
@vin374
7 жыл бұрын
I ditched the Clearwater harness. i installed using a Hex EZ Can. Much easier and cleaner of an install. I also HATE posi locks, or any type up butt connector. Everything on mine is soldiered and shrink wrapped
@flat6fever680
5 жыл бұрын
I thought Posi Taps were pretty decent. What don't you like about them that I should know? I just ordered a bunch and they are pricey...
@ronleon62
4 жыл бұрын
I love posi-taps!
@theneverman
5 жыл бұрын
That side battery panel isn't so hard if you have fingers as thin as a credit card. ;-)
@ricardosebastian6304
7 жыл бұрын
hi there where is the video for the removal of the gas tank?? Thank you
@ADVCityGuy
7 жыл бұрын
Hi, see if this will help you, kzitem.info/news/bejne/xqWOzqp_pZtopGUm26s
@voxellab4339
7 жыл бұрын
You did a great job but. I can't count the thing wrong with Clearwaters design. 1. exposed electrical connection on the relay 2. zip tie mounting of the relay 3 (micky mouse). exposed colored wires 4. (I want the wiring to blended in) 5. huge plug heads (why so big?) 6. I blame BMW for this one. What a lame lazy design to have the wires outside the crash bars. At lease have a cable chase molded to the bars. So all said and done is the dealer cast that off base?
@venkateshkrishnan6478
7 жыл бұрын
Good diy but too much of dismantling
@enzopuliti4766
6 жыл бұрын
I concur. I referred to the video uploaded by Clearwater. I installed my Ericas in 75 minutes and only removed the seat, battery cover and tank cover. kzitem.info/news/bejne/x52e33qPrmh8qX4
@ricardosebastian6304
7 жыл бұрын
yes Thank you I ve a pair of Krista light and it is a bitch to install!! I ll try jaja
@ADVCityGuy
7 жыл бұрын
I know what you mean. Take your time. Let me know if I can offer any assistance.
@ricardosebastian6304
7 жыл бұрын
yeahh could you came to Argentina and give a hand!!
@milabaigar
8 ай бұрын
If you have a warranty be careful bmw hate you doing your own install , I have a battle at moment with my battery being older than my new bike !! Now it’s failed they say because of light’s installed 😡🤡🤡
Пікірлер: 31