This is the best step by step guide for Mazda 3 coilover install. Period. Some dudes should learn.
@g0dL55Zq
7 жыл бұрын
Hey Ally. I wanted to thank you SOOOOO much for this video. A while back I had an airbag system installed and last night... one of the fronts got a puncture as I got home. Well, since it was late in the evening, all shops closed and it was only half way into my garage... I HAD to do something. Lucky for me, I still had my old hardware and remembered your video tutorial!!! I watched your video back and forth and some 5+ hours later (everything that can go wrong... did) I finished my first ever attempt at a front end suspension swap, my car was derivable again and I could comfortably close my garage again. THANK YOU !!! THANK YOU!!! THANK YOU!!! THANK YOU!!!
@everythingdiy
7 жыл бұрын
Awesome! Glad we could help!
@ericcorse
9 жыл бұрын
"Pretend like it didn't take 10 minutes to move that" LOL you aren't alone in this.
@TrickyTrav967
6 жыл бұрын
Eric Corse haha right!
@abadmixtape
9 жыл бұрын
I literally laughed when I saw this video because I'm planning on ordering coils in the next week or so and this video will definitely help out
@everythingdiy
9 жыл бұрын
***** Awesome! Glad we could help!
@christopherbrown5338
7 жыл бұрын
It's refreshing to see a woman doing DYI on an automobile. And I really like how she was able to over-come strength with working smart, oh and the fact there was no cussing, seriously, who can work on a car without swearing :)
@redding4540
7 жыл бұрын
Christopher Brown she is mine. and shut up
@sonicstep
7 жыл бұрын
"oh and the fact there was no cussing." Depends on the age of the vehicle and what sort of pressure one is under to get the job done. It's not funny working on a vehicle that has ceased rusty bolts/studs, screws.. If it's all quite new it's alright. Else you have start thinking laterally like an engineer to overcome.
@CARRERAY964
8 жыл бұрын
I have watched about 20 videos on youtube on how to upgrade my 2012 Mazda 3 suspension. Nobody and I mean nobody does the best concise, accurate, shot very well, and very articulate "How To" video than your youtube channel. I thank you very much for having your channel of "How To" videos. It was really frustrating watching other people do what you just did. Just a bunch of muttering idiots and their cameras all over the place. Sometimes no help at all! I am an intermediate shade tree mechanic with my truck, classic cars and my Porsches. I always like to check on youtube before I do any work on them, just in case there are tips and tricks on how to do them. Your channel has been the most helpful in lowering my Mazda 3. Keep up the great work and I already subscribed to your channel. Cheers !
@dannycool59x49
7 жыл бұрын
chrisfix
@captainyak3948
7 жыл бұрын
This video will put most mechanics out of business. Everything is clean and easy no gloves needed...
@m.almarzouq
9 жыл бұрын
man im in love with this girl she knows her way around a workshop/car awesome
@jacobalvarezdelcastillo7295
9 жыл бұрын
Great job girl!!!! I like to see girl standing up without men's help.. Girls who dont care to get messy. This is a great video, just what i was looking for.
@dharmaboy75
9 жыл бұрын
Good vid. The only thing that would stop me a home mechanic from doing this mod, is the rust all our cars get living in Canada. The sway bar mod took me over an hour, with taking off the rusty bolts an hour alone.
@mountainlife6990
7 жыл бұрын
This girl is better than 95% of the guys on youtube trying to expain how to install. Shes a keeper
@kennymason1280
8 жыл бұрын
excellent and easy to follow instructions. fitting my coilovers tomorrow morning. Glad i have your video to fall back on, if i encounter any problems. thanks for posting this.
@andybonilla6768
8 жыл бұрын
As a certified mazda tech, I am impressed
@Road2PBATour
8 жыл бұрын
Surprised you didn't mention how dangerous those spring compressors are if they are not set correctly.
@jt13910
6 жыл бұрын
The68VeeDub extremely dangerous
@group7842
7 жыл бұрын
Your videos are expertly done and are so very helpful. The only thing I would do is add information regarding where you purchase the replacement parts you use. If you buy online, a direct link, if you purchase in-store, a name and location. I understand you're not being sponsored so I don't blame you. Its just I'm searching for the rear sway bar and coil over kit and cant seem to find them. Also a direct link for an online purchase ensures that your viewer buys the exact same part. Thanks for all your help. Keep up the great work
@Cricis11700
9 жыл бұрын
Why is she so pretty wtf?!?!?
@jass355
8 жыл бұрын
+Cricis11700 she is sexy
@Ernestom5
8 жыл бұрын
+Cricis11700 Most pleasent to watch installation-video ever...
@nismodvo1
9 жыл бұрын
Thanks for creating this video and the trick to separate the knuckle with the bolt and washer. Really helped with the install.
@SacCarScene
8 жыл бұрын
Great video, very easy to follow with your instructions. Very talented young lady. It's nice to see someone who knows how to work on cars while explaining everything with proper nomenclature and execution. The helpful tips with the washer are great.Thank you for you hard work.
@BoOmBaMan
9 жыл бұрын
fantastic video! I just lowered my suspension yesterday (g35 infiniti) I wished I had watched this before i did the job lol keep up the work. I appreciate what you do.
@elmakednos
8 жыл бұрын
Better that a mechanic.Wish all wifes knew something of this.Excellent job.
@corystansbury
9 жыл бұрын
Props on the video. You do a much better job than most on youtube. I am sure that you receive a fair amount of undue perceptions on your abilities just because of your gender (and being pretty on top of it). However, having seen enough actors, it's pretty clear to me that you are comfortable with what your discussing and didn't just learn it 5 minutes before the video. So major props on that. Only one minor nit, and it's nothing catastrophic (in most cases). When torquing a bolt, make sure that you achieve the "click" while in a steady a consistent motion. I have noticed several times where you've had to stop due to clearance and then restarted. After restarting, you immediately achieved the click with no actual bolt rotation. Similar occurrences happened when initial tightening was enough to trip the wrench. By stopping at this point, you are simply verifying that the static friction of the threads and bolt head mating surfaces exceed your torque spec. What you should do in this instance (and yes I realize it's a bit of a pain) is back the bolt off enough so that you can achieve your torque "click" while in motion.
@Rainagain1975
8 жыл бұрын
Good advice. I did not know that!!!
@blmike4860
9 жыл бұрын
Boy, you stay really clean while doing the struts. I get dirty as hell LOL. Great video, I'm subscribing.
@colintx800
7 жыл бұрын
It's fantastic seeing females doing car stuff, You go girl !!!!
@highlandermccloud3594
6 жыл бұрын
Yeah such a turn on for guys... :P
@domrice9153
4 жыл бұрын
very cute
@devonsantiago1947
4 жыл бұрын
Hi I’m putting in my coil overs to the same car that I just bought converting from Bag’s is the bump stop just that rubber pice
@vzuolee
4 жыл бұрын
The guy is holding the camera and laughing there? Good job Miss.
@gabvela8192
9 жыл бұрын
Thanks for the video. Wanting to replace old worn out MacPherson struts
@joeautorepairauto210
8 жыл бұрын
GREAT IDEA with the washer it make's removing of the strut much easier. Great to see women doing auto repair.
@mrenigma8558
8 жыл бұрын
That had to be the cleanest suspension job ever! Not a spec of grease on them hands, lol. Props!
@gabrielthelin6990
5 жыл бұрын
Thanks to this video, I now have coilovers on my mazdaspeed 3.
@floridaboys13
5 жыл бұрын
Love a girl that into cars and can do everything by her self
@sniteper
9 жыл бұрын
Great video. I am impressed how simple you make everything look. I started doing work on my car due to your instructional videos. One question, how did you became interested in working on cars?
@Zyras
9 жыл бұрын
Perfect timing. My coilovers arrived exactly 1 hour ago haha
@everythingdiy
9 жыл бұрын
Zyr as Awesome! Glad we could help!
@miguelcarriles6497
4 жыл бұрын
everythingdiy I just bought the coilovers for my 2012 Mazda 3 but mine can adjust the spring and the shock any suggestion thanks
@consaka1
9 жыл бұрын
Nicely done. Would have preferred it to be a custom 4x4 but hey all the coilover info you can get is a good thing.
@jewllake
9 жыл бұрын
very nice. Your videos keep getting better and better.
@SlowCarsFastSFV
2 жыл бұрын
Thank you for the video. You included a lot of quality information for others to use. Unfortunately, I have a newer Mazda 3 instead of a MS3.. :(
@rl95719
3 жыл бұрын
Great job explaining everything
@PotatosPotatoes
9 жыл бұрын
Spring compressors...the scariest thing on earth. I thought nothing of them until I shot a coil halfway down the street. BE CAREFUL!
@TheSuburban15
9 жыл бұрын
Mikey Johnson Like handling a gun, don't point the top-hat at anything you're not willing to destroy.
@FirstLast-Sandman
9 жыл бұрын
TheSuburban15 Yeah, I always have it pointed up and away from my face. It's scary when i watch people using the compressors with their face right on top of the coil.
@corystansbury
9 жыл бұрын
+Mike Johnson I am absolutely terrified of them!
@Cricis11700
9 жыл бұрын
Man I believe you it probably shot a good 15-20 feet away from you huh?
@bigwhitechevy2557
8 жыл бұрын
I believe it! Using something like that to compress something so strong seems crazy!
@LastMinuteGarage
6 жыл бұрын
Cool trick with the washer and pinch bolt.
@enriqueze5506
8 жыл бұрын
omg i love this girl well she is pretty but what i mean she explains everything excellent i swear her channel better then most of these mechanic channel i chance my front and back shocks very but very useful video i followed all the steps and save my self a lot of money not taking it to the mechanic thanks excellent video you executed flawlessly by the way i have a 2006 mazda 3i standard
@everythingdiy
8 жыл бұрын
+eddy Enriquez Eddy, really glad I could help! I really appreciate your kind words of support! You sir are awesome!
@failohnn2220
9 жыл бұрын
If only installing coilovers was really this easy lol
@numinous4789
8 жыл бұрын
LOVE those MS Coilovers. They really are the very best you can get for Speed 3s. Even beyond KW V3s, these has custom valving and spring rates that are optimized for MS3s. You can get them for a steal too if you're a member of Mazdaspeed Motorsports (MSM) which is easy to join by participating in some auto-x and tracking events, and submitting the proper paperwork. Then, you can get these coilovers for an amazing price. Also, a factory-fresh, brand-new longblock is only ~$3,200 for MSM members too.
@everythingdiy
8 жыл бұрын
+Numinous I keep meaning to join MSM. I know the requirements aren't very high I just need to find the time to complete those 2 races, maybe this will be the year. I would love to get a long block and pop and drop some Manley rods and CPE pistons, then I can finally upgrade to a BNR S4.
@numinous4789
8 жыл бұрын
+everythingdiy I love my BNR S3, so I'm sure the S4 would be great too. In terms of the build, you may want to check out the Manley pistons offered for Speeds too. They have the characteristic DI pocket designed into their crown, and lots of people are having great luck with them. CP-e Stage 2s are a great choice and are custom made by Wiseco to CP-e's specs, IIRC. But I think the Manleys are a better price (don't quote me on that) and have great design features too.
@hngbones
8 жыл бұрын
Really cool video. you stayed clean... I usually get sweaty and dirty!!!!! lol
@guster730
5 жыл бұрын
Thanks for this doing coilovers myself for the first time soon hopefully goes well
@AJFresh69
9 жыл бұрын
I just ran across your video tonight. Very good, clear demonstration and clear instructions given. Well done! You have a new subscriber :) Some questions I have about the coilover installation. What tool did you use to measure the ride height of the coilover? How did you know you achieved the torque you wanted on the nut tightening the top-hat? Is there a way to do this with a torque wrench? How did your hands not get filthy doing this without gloves? Please post a review of the struts. Maybe include some race track footage. Great time to review those tires mentioned earlier in the comments as well.
@marcuswoods2286
8 жыл бұрын
Where in the world did you find those Mazdaspeed Coilover?. I can't find them anywhere. Your videos are awesome! Keep doing what you're doing.
@everythingdiy
8 жыл бұрын
Apparently they've stopped making them so they will be hard to find. Here's one I found at an OEM Mazda Parts supplier: www.jimellismazdaparts.com/products/COIL-OVER-KIT-MAZDASPEED/1963423/RAMS8ML10.html. You could also buy KW V3's, it's pretty much the same suspension.
@gcphotographers-channel
9 жыл бұрын
You did it...lol You finally posted the video requested. Awesome. Looking forward to what is nezt. If any suggestions, I am always willing to give my input.
@Harryofalltrades
9 жыл бұрын
I'm just amazed at how little rust there is around your suspension and by how clean it is under there. I'm assuming you don't live in the rust belt like I do. Is this car a daily driver or is it just a track car?
@everythingdiy
9 жыл бұрын
Harry of All Trades I live in an area with mostly sunny weather. The car is driven daily with the occasional track day. Thanks for watching!
@hondaboss500
7 жыл бұрын
washer trick works perfectly
@JahRootsRadio
4 жыл бұрын
Question how do you stay so clean working on cars with no gloves 😂 Amazes me. I must know please do tell
@Avarice-Zero
3 жыл бұрын
I said the same thing!! Must be a body double. 🤣
@lambertrodriguez1057
8 жыл бұрын
i think im in love
@CrunkyOMan83
7 жыл бұрын
me 2
@CrunkyOMan83
7 жыл бұрын
she is even very throughout threw the whole video, love it
@marcosbueno2365
7 жыл бұрын
me 2
@highlandermccloud3594
6 жыл бұрын
What drugs you been taking?
@derailed2157
5 жыл бұрын
@@highlandermccloud3594 the love potion
@NAPSTERGEOS
8 жыл бұрын
These woman are a really fantastic person, these videos are so good explained, thank you for all, congratulations for your good tutorials. You should be keep doing more videos!!!! :-)
@javedfazil6686
7 жыл бұрын
never took a female doing anything seriously. but this one is good. seriously. good job
@TheWorldofAaron
8 жыл бұрын
Great DIY, I really didn't want to take a hammer to my suspension.
@gmans7859
8 жыл бұрын
Thank you, thank you for sharing! Found your video(s) doing studies on Coilover suspension upgrades. My son and I are about to do up his older model BMW with KW pieces and this was very helpful. :)
@ALLSERVICE_RO
7 жыл бұрын
Nice. Now I have to convince my girlfriend to do the job while I have a few beers on the spot. And I will need the Corksport camber plates too
@muffin4600
4 жыл бұрын
Do you know at what point you need to get the camber plates? Is it necessary for just a little bit of lowering?
@NateRist
8 жыл бұрын
Not sure where you read that these coilovers were made by KW, but the aftermarket equivalent of these would be the Eibach multi pro R1 coilovers. The bump stops should also say Made in Germany on them as well. I also have these coilovers, but for my RX-8 which are RAMS-8M-K01. I also don't think mazda ever did anything with KW either and to my knowledge Tokico and Eibach are the only after market companies to make mazdaspeed performance suspension components for mazdaspeed tuned cars and/or non-mazdaspeed tuned variants of them or at least for the RX-8 anyway (Tokico makes the mazdaspeed shocks and, I believe, the height adjustable shocks as well for the mazdaspeed RX-8 versions I and II and eibach for the RAMS-8M-XXX adjustable coilovers)
@everythingdiy
8 жыл бұрын
+Nate Rist They are made by KW I promise, I called them personally and they confirmed these coilovers were specially made for the Mazdaspeed 3's and are equivalent to their V3 line of suspension. This is a pretty well know fact in the Mazdaspeed 3 world. These coilovers even say KW on the strut body and have KW trimmed aluminum adjusters. Look at the two sets of suspension side by side they're perfectly identical minus the color of the springs and perches. Mazda does not use the same manufacturer for all of their in-house performance parts.
@NateRist
8 жыл бұрын
Hmm, well I guess that's good to know then. I really don't know anything about mazdaspeed models beyond the RX and MX-5 models and for both the 8 and NC miata the coilovers are Eibach multi pro R1s from Eibach, but then again their chassis and suspension setups are nearly identical so it would make sense that they receive similar parts from the same manufacturer, I just thought the RAMS-8M-XXX part number was manufacturer specific, but I guess it's probably just a part number for mazdaspeed motor sports instead, so thanks, I learned some new about #Speedymazdastuffz now:)
@keembasadre4570
7 жыл бұрын
Did the rear springs come separate to the struts or did you just take it off? Bit confused because all the coilovers I look at the rear springs are on the struts.
@SuperDexterization
8 жыл бұрын
Very nice tutorial. I am going to replace the front struts. The reason, the near side tyre wore out at 7000 miles from new. The offside has plenty of life. My guess is, it could be due to shock absorber. What would you suggest? How difficult was it to remove the top hat nut ? I will be re using the spring but replace bearing, cover, bumpstop. I do not want to wrestle with the nut with spring compressor in place. It scares me. What would your recommendation be? thanks.
@alihadi1978
3 жыл бұрын
لديك الخبرة الجيدة في هذا المجال احسنتي
@juancastaneda3356
9 жыл бұрын
I'm your 200th like, tks for awesome and educational vids.
@everythingdiy
9 жыл бұрын
Juan Castaneda You're awesome! Thanks for watching!
@szatanizmo
7 жыл бұрын
I like it how she torques it without a torque wrench :)
@shehatamf
8 жыл бұрын
Hello, thanks for your really good explanation. Can I use coilovers to INCREASE the ground clearance of my Mazda3 ?
@sleepe361
8 жыл бұрын
Nicely done video and you did a great job on explanation and the installation thanks!
@StevePhillips
9 жыл бұрын
Thank you for such great DIY video. That was truly amazing! My brother and I recently got garage to do ours (Nissan Primera 1997) and we been playing around with mechanics for years, well at least he has. We had even bought brand new spring compressors that we never used. We are now doing up old Humber Super Snipe 1963 hard to get parts for these; I was wondering if the wheel hub and disc break is same as your Mazdaspeed 3 The disc breaks on our Humber are rough around the edges, could do with replacing. It is 5 bolts like yours. I may take chance and buy one hope it fits.
@simoncarlsson2836
7 жыл бұрын
You dont have to use the old bearing right , just the top hat? You use the bearing that comes with the coilovers?
@bloodbath08
7 жыл бұрын
This girl is amazing
@2Razor7
5 жыл бұрын
For the rear lower shock absorber. What type of bolt did you use to replace it.
@govindrpillai
7 жыл бұрын
Great video. I'm planning to replace front shocks/struts for Mazda 6. Where can i find torque values?
@ohmyrufiohhh1303
8 жыл бұрын
This is completely different from my WRX. lol it seems way more complicated and a bit of a pain in the ass. I do love your eyes though... oh and this was a great video btw...subscribed
@miamirepo
8 жыл бұрын
wow I like a girl that knows how to work on cars
@Matthew-ej3pg
8 жыл бұрын
right!
@jambrand3708
6 жыл бұрын
Makes it seem so easy
@christianwellness4363
7 жыл бұрын
this world needs more women like her
@Sarm-mx6qy
6 жыл бұрын
Hi DIY! I Was hoping you could answer a question for me that I can't find the answer. As you state in this video the MS3 Mazdaspeed Sport Suspention RAMS-8M-L10 are made by KW and are like their V3s. We can even see the KW on the bottom adjuster in the beginning of this video. So my question, who makes the MZ3 Mazdaspeed Sport Suspention coilovers RAMS-8M-L05? And would they fit a MS3? If so would they be equal to MS3 stock OEM suspention, better or worse? I'm asking because I found the L05 kit for a great price. I don't think they have rebound or compression adjustments and that dose stink. But the L10s are simply too expensive for me. I don't track my car. It's just my daily driver. Your input would be greatly appreciated and welcomed. Thanks. 😊
@everythingdiy
6 жыл бұрын
I think the L05 is made by KW but it's equivalent to their V1 stuff. So that would mean no adjustability. The spring rates for the L05 is about 230 front and 180 rear so stiffer than stock but not by much. The biggest gain you'll see is height adjustability. Weather they will fit a Mazdaspeed 3 is kind of a toss up. I personally wouldn't risk it for so little gains. Might be a better idea to spend a bit more and get something built for a speed 3.
@Sarm-mx6qy
6 жыл бұрын
everythingdiy Thank you for the reply and input. Your the best.
@iMMor74L
8 жыл бұрын
Greetings! New subscriber here and I love the videos. You're very knowledgeable! How did you find out so much! I was curious about your at home alignment? The video said coming soon and that was like a year ago, ;] Thanks!
@catyson91
Жыл бұрын
I cannot get my rear endlinks tighten back up. With smaller springs there's so little space to tighten them back up and that's after taking them out and adjusting the height.
@SgtJoeSmith
8 жыл бұрын
do a video on installing an air locker rear differential.
@photonman54
9 жыл бұрын
How do you remain so clean through the process? I always end up getting dirt on me.
@vermili0138
9 жыл бұрын
I think it should be safer to hold the shock with a vise while the springs are compressed to avoid slipping and possible injury. Great video nonetheless!
@arikoenig4536
6 жыл бұрын
What's easier to install, coilovers or a set of lowering springs?
@MariuszLopz
9 жыл бұрын
hey!! love your videos!! i have a 2010 red mazdaspeed myself (im from mexico BTW) i think you´re so talented im mechanical matters, and cute as a button,. one cuestion i notice that your front calipers a bit faded, are you gona change the calipers? or paint them? aonther cuestion is there any specific replace for them like brembo or ap racing? greetings!
@raphaelolivier5207
8 жыл бұрын
What a great video ! I am impressed. Thumbs up and subscribed.
@Sarm-mx6qy
6 жыл бұрын
Hi DYI ,... Ally, I know this is over two years old but I have a question. Mazdaspeed offers a Sport Spring Kit GRMS-8M-L25 for the MS3 I have an 08 Gen 1. This spring kit comes with the Rear Camber Links GRMS-8M-L07 that would be needed for proper install of the coilovers. So my question is this, If I was to purchase this same Mazdaspeed Coilover suspension kit RAMS-8M-L10 that you installed on your car in this video, would I not need to order the sport spring kit? Perhaps just the camber link as suggested my Mazdaspeed? Im asking because I see that the coil over kit comes with 4 springs already and I would also like to lower my car. But if purchasing both kits would be redundant in regards to the springs provided I would rather not and save that money. My guess is that both the Mazdaspeed coilover kit and sport spring kit come with the same lowering springs? Is that a safe assumption? Thanks.
@everythingdiy
6 жыл бұрын
The coilover kit already comes with springs, no need to buy additional springs. The spring kit you are referring to are to be used with traditional struts and shocks. To be honest the price of that spring kit is a little ridiculous, for half the price you can enjoy a set of Eibach or H&R springs. Additionally, I know of the rear camber links you are referring to. My issues with these camber arms is that they're still static and are very expensive. Instead of the mazdaspeed camber arms buy adjustable camber arms from SPC, they can usually be found for around $70 a piece.
@Sarm-mx6qy
6 жыл бұрын
Cool. Thanks for the feedback. Much appreciated.
@michaelwilliams6261
8 жыл бұрын
very good step by step loved it!!
@ABadildzperformance
7 жыл бұрын
so that makita 3/8 electric impact is pretty rad. My milwaukee electric 1/2 purchase looks like a bad idea now. lol
@yukselroc9446
7 жыл бұрын
Hey, I like the video... I got eibach prokit on my scirocco (2012) but Im bored of it. So i want to buy coilovers, but in my country the taxes are so high, I wanted to buy JOM blueline coilover. is this a bad idea for you? could you please help? Thank you. and btw, im not a guy driving sooo fast and unaware, Im %90 calm. Nevertheless should I buy kw?
@yukselroc9446
7 жыл бұрын
Could you give me a reply please?
@alaorjr9515
9 жыл бұрын
Great job, excellent explanation.
@CaesarCL
5 жыл бұрын
Did the lower shock bolts come with that suspension?
@2Razor7
5 жыл бұрын
Did you ever find new bolts. I'm having the same problem
@StreamGhost801
8 жыл бұрын
I thought those spring compression tools say specifically not to use power tools on them.
@Road2PBATour
8 жыл бұрын
Yeah not too smart because if for sone reason it slips it turns deadly.
@yongsin8388
8 жыл бұрын
nice and clean!god job!
@oakcliffscrewhead
9 жыл бұрын
You're too cute and you really know what you're doing. Keep it up.
@barrancorjuan
8 жыл бұрын
hi, nice vid what model is your impact driver?
@SDBoards55
7 жыл бұрын
wow, that was pretty detailed! thanks!
@vermili0138
7 жыл бұрын
I'm guessing you didn't pay much attention to the brake line @ 5:00 since it was a braided line?
@andrewgoulbourne7919
8 жыл бұрын
wow well done well done thank you
@dillonkoch72
7 жыл бұрын
i just gotta through this out there your beautiful lol anyways do you know anything about spring rates for 4x4 suspension I have an 02 chevy S10 ZR2 4x4 with bilstein shocks stock 3inch lift with 31×10.5 tires. I have options of rough country,pro comp,KYB,skyjacker shocks but they are half the price and have a more rough ride on pavement. so I just wanted to swap factory OEM bilstein shocks since they ride so smooth but I want to put coil overs in the front to give me a little stiffer suspension and my tires rub when I'm off roading even though my tires are factory size. what would be my best option as far as spring size and spring rate. the vehicle weights about 5,000lbs
@ericeanes2201
8 жыл бұрын
do you wash your hands after every shot? I'm surprised they are so clean when you work o. your car.
@everythingdiy
8 жыл бұрын
+Eric Eanes Yup. I wash them often because I also deal with camera equipment.
@beyondcleon
8 жыл бұрын
I was going to install new wheels (with different specs than stock) at the same time I install my new coilovers. Should I ride on the new coilovers without the new wheels for the first 1k miles to avoid multiple realignments in the future?
@everythingdiy
8 жыл бұрын
+beyondcleon It's not that big of a deal but I would let the coilovers break then get a good alignment before I would install new wheels and tires. Thanks for watching!
@rp-stripsrigo426
6 жыл бұрын
Hello I have a question those coilover fit in a mazda 2010 sport 4 doors 2.0. Let me know please I love your chanel we need more videos thanks.
Пікірлер: 386