This is how to install dd-wrt on a Linksys WRT54GL router. I go though what I did from start to finish. For more info on dd-wrt and other cool video please visit: www.nickmcd.tv
This is a great video. it's much easier than the install wizard that came with the router. It allows you to do more and get better options. It's easy to understand and I will have no problems now. Thanks for the info.
@misternumberuno
11 жыл бұрын
As a very software-OCD advanced PC user who is less than well-learned in advanced networking specifics, I gave up trying to find out which EXACT build was the one that was THE NEWEST AND BEST that could be installed on my PARTICULAR router and how I could do that and so I'm now here to see what this guy did, hoping I can later upgrade to that EXACT BEST NEWEST PERFECT build. Then I'll probably spend 3 hours configuring it just EXACTLY PERFECT. :\
@JayzBeerz
12 жыл бұрын
You made it look simple the instructions say other wise.
@FusionDeveloper
11 жыл бұрын
I got it working on a WRT54GL 1.1 as the bridge repeater using "dd-wrt.v24-12548_NEWD_mini.bin" and a WRT45GS 2.1 as the primary hooked to the computer & modem.
@FusionDeveloper
11 жыл бұрын
The only way your router could get "hacked" because of having the default name/pass to log into the router, would be if someone else got on a computer which was also connected to the router in order to change settings, right? Because doing a reset on the router, would reset it back to the default name/pass, so it seems kinda pointless if the router is in your bedroom at your home and nobody else has access to it.
@redneck5002
14 жыл бұрын
*finger snapping* Hey, focus.... I asked a question LOL
@sashoivkovski5660
9 жыл бұрын
What is best dd-wrt firmware for this router wrt54gl v1.1
@wytze2
10 жыл бұрын
So whenever i try to enter the ip-addres from the linksys router in to my browser, i dont get to the linksys setup screen. I either get get the message : "Can't connect to the internet" , or I get the login screen from our new router, so not the linksys router. What do i need to do to get in the linksys setup screen?
@googo151
10 жыл бұрын
Make sure that you are typing in the correct IP address for the router (gateway, default unless you changed i.e. 192.168.1.1) and that your computer is also set to a static IP address. Something like, 192.168.1.10, with a subnet mask of 255.255.255.0 ---- Also, helps to do a hard reset of the router before proceeding.
@redneck5002
14 жыл бұрын
hey man, with the ddwrt does the ability to boost the signal strength make a noticeable difference? I live in a house that for some reason I have a real hard time getting any signal even with the router close. Thanks Josh
@barbershop22
11 жыл бұрын
Do you do the hard reset with the router powered on?
@donnawollmuth1038
12 жыл бұрын
in the video you do not have the router plugged into anthing do i need to unplug it and will it work with magicjack plus
@andrewcorrea9000
11 жыл бұрын
Can u do hard reset without power cause you did
@JoseJavierFlores
12 жыл бұрын
Would the WRT54GL with the DD-WRT firmware be good for a Guest Wi-Fi Hotspot? I have a WRT54GS V6. router w/ the micro firmware.
@juggawest
11 жыл бұрын
I have a wrt54g2 v1 and an airlink 101 router I want to put the linksys upstairs as a repeater so my kids can get a better signal can this be done with this software and would it have to be on both or just 1 I have the cable Internet service with no wireless built in the airlink connected to get a wifi signal
@n310ea
13 жыл бұрын
Do you get a stronger wireless signal strength with the new firmware?
@barbershop22
11 жыл бұрын
I have a Linksys 54 TM router, is that the same?
@PoppinCain
13 жыл бұрын
okay so. i just moved in with my friend and her ex set up dd-wrt on her linksys wireless router. i had never heard of it before this and the only comjputer that can connect to the internet via wireless is her laptop. i can't get any of my laptops to connect even after putting in the passphrase in my laptop. it seems as if i need to put my mac and IP address of my computers into the web GUI somewhere in order to connect but i can't figure out where to do so?
@jesse197981
10 жыл бұрын
Sweet Works Great
@GilbertSarip
12 жыл бұрын
Can you return back to stock if it is bricked
@WW4KID
13 жыл бұрын
Do i actually have to turn off windows firewall and my antivirus software?
@SuperMewio
11 жыл бұрын
I might get this router just to do that.
@abumuky007
10 жыл бұрын
can this firmware support mesh network?
@FusionDeveloper
11 жыл бұрын
However, I changed my name/pass to something more standard and easier to remember than "root" as the username.
@ANotesTv
12 жыл бұрын
Hey that 192.168.1.1 doesnt work for me the pass is incorrect
Пікірлер: 29