This is why I turn my notification bell on for your channel. I know you put a ton of work into your videos but wow dude, I am not sure who else saw how clean the suspension looked, all the painted parts, the calipers, etc... You go way above and beyond and that is why I love this channel! Your attention to detail is exceptional.
@chrisfix
7 жыл бұрын
I pinned my own comment but changed my mind when I read this! Thanks Joey! That really means a lot!
@Joey-rr7cl
7 жыл бұрын
No way! I cannot believe you pinned my comment. Thanks Chris.
@JonnyGuns
7 жыл бұрын
I second that, Joey!!
@matthewyoung917
7 жыл бұрын
Its amazing how you have all this knowledge. Were you a mechanic before youtube?
@bayumahardika1996
7 жыл бұрын
love from indonesia.. keep it up man
@eddie9591
7 жыл бұрын
I came out of curiosity to see what a dual caliper setup was, I left learning how to fix a rear axle seal that I really need to fix in my car. Great video as always.
@chrisfix
7 жыл бұрын
+Eduardo Serrato that's awesome! Glad the video was helpful!
@WarHawk427
6 жыл бұрын
It must be so funny watching you film, "Now we're gonna go from this..." *four hours later* "...to this*
@chrisfix
6 жыл бұрын
haha sometimes I wish it was only 4hrs
@Erafune
6 жыл бұрын
His voice has time to go through an entire puberty before "...to this". One day it's gonna be all old and raspy. xD
@mikuhatsunegoshujin
4 жыл бұрын
@@chrisfix Do a project that'll take you 20 to 30 years and make it happen.
@dawnmiller5872
4 жыл бұрын
@@chrisfix hi
@arhumtariq9455
4 жыл бұрын
Not really cause of editing he could say it and put the picture
@harunaljabbar96
5 жыл бұрын
Can i afford this? No Did i need this ? No Did i watch the entire video? Hell yes Hotel? Trivago
@haydenreyes4621
5 жыл бұрын
Lol
@reddplays2367
5 жыл бұрын
Harun ALJabbar I do have a car. Do need help but I still won’t do it myself 😂
@lildickanator
5 жыл бұрын
i wasnt expecting that lol
@alexpero9682
5 жыл бұрын
Harun ALJabbar lol
@jirkazeman7834
5 жыл бұрын
lol
@benhaggerty8707
7 жыл бұрын
I don't even own a car I just like watching this stuff
@chrisfix
7 жыл бұрын
Thanks! Glad you enjoy the videos!
@gtrlover3039
7 жыл бұрын
same
@affalterbachamg2094
7 жыл бұрын
ChrisFix Same but i help my dad im a 11 years old i was a mini mechanic i can replace oil,checking fuses cleaning air filters,replacing intakes
@dwaynsmith2151
6 жыл бұрын
Me too
@Stranger56474
6 жыл бұрын
I watch and I'm just a kid
@Trades46
7 жыл бұрын
I admit I never seen a dual caliber setup before. Most would simply go for a single fixed 2 piston upgrade, but a dual setup is new to me. Very informative.
@chrisfix
7 жыл бұрын
Glad you enjoyed the video!
@sultanmehmoodghaznavi6312
7 жыл бұрын
I dont have a RWD but now Im a mechanic. thanks to KZitem. very informative!! no mechanic can fool me now.
@chrisfix
7 жыл бұрын
Glad the videos are helpful!
@teamdonotbotherme1285
7 жыл бұрын
ChrisFix I'm pretty sure you've made a few people mechanics!!
@ozomini3400
7 жыл бұрын
team do not bother me correction: alot
@ImUrOBGYN
7 жыл бұрын
That kinda thinking's gonna get ya fooled! ;)
@abud512
7 жыл бұрын
me too hahaha
@travishamiltontattoos4635
5 жыл бұрын
Anyone else thinking "I just learned about another part of my car that can go bad." It's a quite a miracle that any car stays on the road for over 6 months with all the parts that have to stay kosher.
@mikehuntsr.3414
5 жыл бұрын
To make your car 'kosher' cut off the best 20% of your car and throw it away.
@AbhishekChandra0606
7 жыл бұрын
I have many subscriptions. But out of all em. yours are the ones I only wait eagerly for. the amount of hard work you put in phenomenal. I pray for your success and may you reach unimaginable heights.
@chrisfix
7 жыл бұрын
Thanks a lot man! I really appreciate it!
@maoristereo
7 жыл бұрын
This has to be the best DIY car channel on youtube.
@chrisfix
7 жыл бұрын
Thanks a lot!
@BlackLocustPatriot
5 жыл бұрын
I definitely second that.
@thedude7726
7 жыл бұрын
I just found your channel. I really like your clear, confident, professional speaking. you earned my sub, saying alto because I'm a Honda guy ;)
@chrisfix
7 жыл бұрын
Thanks a lot!
@yeahnah6468
4 жыл бұрын
Dual calipers are also a lot smarter than tapping into the existing rear caliper lines. You don't risk losing all your brakes if something goes wrong. Also in some countries it's just plain illegal to modify the existing braking system, so this standalone system gets around that which is awesome! Thanks for all the effort you put into your videos Chris!
@dachiiiii
7 жыл бұрын
who else watches his vids just because you r interested in cars and dont have car or dont need help?
@chrisfix
7 жыл бұрын
Thanks for the support! Hopefully you still learn a lot!
@furiousfighter5385
7 жыл бұрын
DACHI YT me!
@ghodkiller000
7 жыл бұрын
me too :), also i have learned new things ( sandpaper, polish and paint scratches video )
@Merobieboy
7 жыл бұрын
Me.
@bendraws8447
7 жыл бұрын
DACHI YT me so i can persuade my parents to let me :)
@POW2000
3 жыл бұрын
I started out watching how to clean an engine....but this how to clip is insanely awesome...an average guy like me can get into the gear box...change the differential oils...change the bearings...even add dual brakes if I wanna...crazy!
@robrond2864
7 жыл бұрын
I'm not even considering mounting dual brake calipers, and still I ended up here. Watching the entire video. Hypnotizing. :)
@chrisfix
7 жыл бұрын
I am glad you enjoyed the video!
@pump-848
4 жыл бұрын
My Favorite Mechanics 1. ChrisFix 2. ChrisFix 3. ChrisFix Sorry I'm tired of typing ChrisFix but he is still the king .......
@gasperajdnik5627
4 жыл бұрын
My favourite mechanic 👨🔧 IS Miroslav kumljn.
@takuachemamalona5899
3 жыл бұрын
You said mechanics not mechanic
@leochen4891
7 жыл бұрын
your tutorials are really high quality. great job!
@chrisfix
7 жыл бұрын
Thanks!
@kristinakaravajeva8879
6 жыл бұрын
Where is your capital letters on your comment??????????
@ThePeach_PieHQ
2 жыл бұрын
@@kristinakaravajeva8879 they left to get milk
@tristankeith5022
7 жыл бұрын
I don't own a car, I am 14. I don't drive or work on cars. Yet every time I see a new video I stop what I'm doing and start watching it till its done now matter what happens.
@ezrakainz
7 жыл бұрын
Tristan Keith same here
@AJFresh69
7 жыл бұрын
Tristan Keith never too early to start learning! this is actually the best time for you before you actually have a car in your hands with a problem you don't know how to fix
@chrisfix
7 жыл бұрын
Thanks for the support Tristan! I hope you are learning a lot because by the time you drive, you will know more about cars than most people on the road!!!
@AirDnB22
7 жыл бұрын
Tristan Keith same here
@aden3113
7 жыл бұрын
this stuff is too good not watch :D (I'm 16 btw)
@chestercheeto2228
3 жыл бұрын
I like how he diassembled his whole suspension to paint it for 5 seconds of footage, now THATS dedication
@408SPLKINGS
4 жыл бұрын
Awesome, legit, you are by far the best teacher, instructor, videographer on car mechanics. Attention to details, clear & precise voice, no shakey camera, but most of all your humble & not conceited. Great work & honestly you should be teaching automotive repair classes. I think you would definitely succeed in everything you do. A master to most but a student to all.
@chrisfix
4 жыл бұрын
Thanks a lot!
@prezzzrock
7 жыл бұрын
I have no need to do 99.9% of things you show in your videos, but they are so well done, and interesting, I watch every one of them all the way through. Excellent job with your videos!
@chrisfix
7 жыл бұрын
Thank you. I am glad that you find the videos helpful!
@anthonygonzalez5289
7 жыл бұрын
The level of detail and specifications that you give in each upload are well appreciated. I cant express enough how much your videos help me to fully understand the process and the correct way to attack an issue. Thx man 👍 couldnt do it without you.
@Usmanthemecano
7 жыл бұрын
you were good in the beginning Chris but now you are simply the best at video production. I wish you delved into more intricate projects like engine building, manual trans repair etc. maybe get a cameraman for those big gigs. but it's nice to see how popular you've become in such a relatively short time. Hard work definitely pays off
@chrisfix
7 жыл бұрын
+affane78 thanks a lot! That really means a lot!
@chrisfix
7 жыл бұрын
+affane78 thanks a lot! That really means a lot!
@MrJohn2475
5 жыл бұрын
hey Chris! I just wanted to thank you for your videos, which encouraged me to take a 2 year mechanics course. I just passed the first module which is introductory, and now the second module is about brakes...I had no idea about all the physics involved and math formulas like calculating deceleration...anyways, thank you again and keep it up man!
@askgodalmightyfortheholysp4797
Жыл бұрын
Ask God almighty for the Holy Spirit
@zPICKLE
10 ай бұрын
What course are you using?
@JamesDuren1
6 жыл бұрын
Ik you probably won't see this since it's from a bit ago, but Im in a terrible place rn and severely depressed but your videos actually calm me and inspire me! Your always so happy and positive and you put sm work into these vids. All in all thank you so much
@bryannoyola7440
3 жыл бұрын
I hope you're doing better man
@gokudbz7842
3 жыл бұрын
same
@agrisimfarming
2 жыл бұрын
Same
@SmileyFace01
Жыл бұрын
It will get better, don't worry
@jhershy1381
Жыл бұрын
Many of us have been. Sorry and hope your getting by
@diabl834
7 жыл бұрын
Why the hell am I watching this? I don't even own a car and it's 12pm..... xD
@chbrules
7 жыл бұрын
Time to buy a car, friend!
@rickybrat4575
7 жыл бұрын
I don't even own a RWD or AWD car but this video was still interesting
@RANDOM-nb9sm
7 жыл бұрын
Mārtiņš Balodis where are you from its only 6:30 where I live
@tomscupra6345
7 жыл бұрын
GO TRUMP europa
@shayneobrien308
7 жыл бұрын
GO TRUMP same here. 7:07pm now
@OhighOSkater
7 жыл бұрын
Videos like this is why I have post notifications turned on for your channel!
@chrisfix
7 жыл бұрын
Thanks a lot man!
@OhighOSkater
7 жыл бұрын
ChrisFix no problem!
@gilbertsalvaleon5900
4 жыл бұрын
Alright...it's a very nice video tutorial Chrisfix,now I have a knowledge how to install a dual brake caliper in the car.ur a very good mechanic instructor Chrisfix,I wish I will be ur mechanic assistant someday.😀
@chrisfix
4 жыл бұрын
Thanks a lot!
@kendrickminchew1855
7 жыл бұрын
I can smell the diff fluid through my phone
@chrisfix
7 жыл бұрын
ewwwww
@clayton8or
7 жыл бұрын
should probably check your battery lol
@IhateYoutube
7 жыл бұрын
Ugh that smell! Like... Carrots and Throwup! Even stink would say that stinks!
@religiousabuse
7 жыл бұрын
strong bad reffrence? idk if you were, because ive been watching a lot of that lately, and i could just be assuming
@flyinsushi8144
7 жыл бұрын
Kendrick .minchew if you ever smelled dif fluid before, you actually kinda can
@mikester1472
6 жыл бұрын
10 minutes in and I’m completely dumbfounded by how amazingly well you cleaned the diff. Insane, great video man, will be doing something like this very soon
@cristianpinto1894
7 жыл бұрын
He made it seem sooo easy....
@chrisfix
7 жыл бұрын
+Cristian Pinto it is easy
@cristianpinto1894
7 жыл бұрын
It is it's just that Im lazy. Love your videos Chris!
@ΣταύροςΦουρναράκης
7 жыл бұрын
pretty sure u dont even have a car lul
@kangjohan78
7 жыл бұрын
I also wish I could snap my fingers and my stuff gets done. Man that would help heaps.
@flaminskull2030
7 жыл бұрын
It is easy as long as you know what your doing
@ICKY427
6 жыл бұрын
1:51 "all that using common hand tools" 5:53 "it does require a set of specialty tools"
@emilio7741
5 жыл бұрын
thats to replace the bearings :)
@ryanmyers5628
5 жыл бұрын
Its not for the thing that you came to watch
@szepikeeh
5 жыл бұрын
besides, he says, you can rent them for free at the local part stores
@AlexGreenwoodUkulele
5 жыл бұрын
@@szepikeeh That being said, that's fine if you're in 'murica. I know of nowhere that'll allow you to rent these tools affordably, let alone for free. Probably £40 to borrow the slide hammer for a day and £30 for the driver kit.
@Reploidx9
5 жыл бұрын
@@szepikeeh Not sure where the hell I'd rent them for FREE in the UK. Local part stores here sure as hell won't
@mrhat1073
5 жыл бұрын
went into this thinking "I don't need dual calipers" to "so that's how you replace those bearings"
@davidallen132
4 жыл бұрын
right? been searching all over for a how to replace rear bearings on a rear wheel drive but couldnt find anything good. had no idea it would include messing with the differential or taking out the axle
@b.saulius3916
3 жыл бұрын
:DD y
@AmaZeGaIVIing
7 жыл бұрын
Always use lubricant while driving your bearings in.
@chrisfix
7 жыл бұрын
#truth
@AmaZeGaIVIing
7 жыл бұрын
That is what she said.
@xtrememachinez2061
7 жыл бұрын
ChrisFix do you still have your Ford ranger
@ahmedsoofi2924
7 жыл бұрын
+Log farhathami?
@aaronm406
3 жыл бұрын
0:34 is the clearest view of Chris fix that we’ll ever get. Just noticed that rewatching this.
@peterortiz9391
3 жыл бұрын
I've saved thousands of dollars doing repairs in my cars my self just by watching your videos. Thanks
@zacharyhalls9056
7 жыл бұрын
Loving your videos keep up the amazing work! I'm super excited about the DriftStang project!
@chrisfix
7 жыл бұрын
+Zachary Halls thanks a lot
@Lysergic_
7 жыл бұрын
24 secods ago...
@legoholic89
7 жыл бұрын
ChrisFix I was wondering if you were able to use thread locker on the fill hole of the diff. Is it recommended or not?
@LynnGryphon
5 жыл бұрын
It's amazing something so small holds your axles in. I have never heard of a C bracket before. I will hopefully never have to deal with something like this but it is cool as hell to see....
@jaydenaviation2974
7 жыл бұрын
I'm a simple person. I see a ChrisFix video in my notifications, and I click like. Then I watch even though I have no car
@chrisfix
7 жыл бұрын
Thanks a lot for the support!
@jaydenaviation2974
7 жыл бұрын
ChrisFix :)
@johnking3623
4 жыл бұрын
you are one of the few youtubers that explains exactly how to do it, step by step! I liked your video. these are the videos you always want to find when you need help! Thank you
@prestondewhirst6602
4 жыл бұрын
Chris, do you think you could leave a link to your magic snappers in the description? It would be really helpful.
@Kamal_AL-Hinai
3 жыл бұрын
What's snappers?
@hassesp2336
3 жыл бұрын
When he snaps his fingers
@jayayyyyy
2 жыл бұрын
Yes, please. It would save me hours! I think the secret is in the gloves.
@op3l
7 жыл бұрын
WOW... that little C Clip is the only thing holding the axle in?
@chrisfix
7 жыл бұрын
Yes but it is pretty thick and wedged in there tight once the pin is in. But it is interesting how that works!
@xzibit442
7 жыл бұрын
just asking do you have a video out how to change drum breaks to a Calipers set up and some info about different calipers like single calipers to 4 or 6 calipers set up
@guesswho1905
7 жыл бұрын
ChrisFix are you ever going to weld to diff
@gunyvw
7 жыл бұрын
hell its only a pin holding the front nut from coming off on most cars
@baowolf0011
6 жыл бұрын
Does anyone else want duel stock calipers now?
@Phyoomz
5 жыл бұрын
dual*
@EdyAlbertoMSGT3
5 жыл бұрын
Me.
@emptysoul4455
5 жыл бұрын
Hell yeah, definitely adding them to my 95 Mustang gt
@rileysmith9843
5 жыл бұрын
Me.
@BlackLocustPatriot
5 жыл бұрын
Yeah!
@michaelescalante7718
2 жыл бұрын
Even if this video is a couple years old, I still watch this all the time cuz it’s so satisfying
@fulltimekiller_1441
6 жыл бұрын
Wow! I have been watching your videos for a long time and just wanted to say good job man! I learn so much from you. Which helps me make more money. I love how professional, clean, and detailed you are. Also, its not easy to keep someone watching a video for 15 minutes and be interested the whole way through. Amazing job man! Thanks for the entertainment and information!
@rogerhupp3115
7 жыл бұрын
Why I love your channel! Straight to the point.
@chrisfix
7 жыл бұрын
Thanks Roger!
@samin90
7 жыл бұрын
"Always use lubricant" Always good advice
@chrisfix
7 жыл бұрын
#truth
@japjotgaming899
3 жыл бұрын
can we just thank Chris how he teached us and told every single step...Thank You Chris!!
@BigAlWillis
7 жыл бұрын
also part of the vid could double as a axle change video. many people do four to five lug conversions on Mustang & would like the info on axle removal. thumbs up
@chrisfix
7 жыл бұрын
True! Thanks!!
@jgysewolf9345
7 жыл бұрын
ChrisFix add soapy wooter for extra brake power
@pyone5457
7 жыл бұрын
Your a LEGEND!
@saltrust1416
7 жыл бұрын
i like my soapy wooter
@jamestowncowfoe171
7 жыл бұрын
rofl
@saltrust1416
7 жыл бұрын
,,,
@itsvoodoo7050
7 жыл бұрын
It also ads some horse power I believe an extra 10
@robloxrules4524
6 жыл бұрын
I own the same car as you do and I am doing whatever you do to yours to mine.
@TheTheRandomShow1234
5 жыл бұрын
Except your actually paying for all the stuff!
@Evanamartin
5 жыл бұрын
dream big buddy. your not a day over 12, based on your channel
@somedudeinchirons4936
5 жыл бұрын
@@Evanamartin 😂😂
@MilesPrower1992
4 жыл бұрын
Dream big, kid.
@jrservicecentergardner1053
4 жыл бұрын
Bullshit
@thebackwoodsmechanic5029
4 жыл бұрын
What I can appreciate is, the man uses basic hand tools to prove anyone can make repairs, save some money and learn something along the way Great content Chris Fix
@saifalbalushi4888
7 жыл бұрын
hey that was a really great tutorial, can you make a tutorial how to convert the rear drum brake to a disc brake if its possible?
@izzaacalley
4 жыл бұрын
5:09 you're telling me that tiny thing keeps my entire axle from sliding out!? Holy moly that is a lot of faith in a piece of metal
@michaelwyatt241
4 жыл бұрын
Most of the car is metal
@vaisanentommi7037
3 жыл бұрын
Well its very strong+dont forget about brakes 🤭
@SaintTheDreamer
2 жыл бұрын
This guy is really good, learning a lot of things from him, wish he was in BC somewhere
@joerogalaki3498
7 жыл бұрын
dude I keep snapping my fingers and my caliper stays the same :) awsome video
@mtherfroskes
7 жыл бұрын
Those Red calipers add 10 More BHP...... Each!
@chrisfix
7 жыл бұрын
Im thinking more like 15hp total but we do have 4 now and they are on the rear wheels!!!
@TR33ZY_CRTM
7 жыл бұрын
Pedro Sales Meanwhile, Brembo brake calipers add an extra 150 hp.
@JoseHernandez-lj5pd
2 жыл бұрын
I’m glad you started this channel! Great videos! Did you ever make a video on how to measure rotors when they are out of round, or warped etc? Plus, did you ever convert drum breaks into disk on that project car that you had? Thanks!
@drofaluap6521
4 жыл бұрын
As a kid that's about to get a new car I want to thank you for these videos. After I watch these videos I feel so confident and that I could fix whatever goes wrong. My moms van actually need new wheel bearings (if I remember correctly) and it was when everything needed maintenance on her van. So she had to pay way over $1,000 for all the stuff that had to be done. Now seeing this I feel like I could've done it for a less.
@Atlantis_Lord2660
3 жыл бұрын
12:52 Top Tip: Before you put the brake rotors on they use a oily coating to prevent rust on the box of the container. Oil and Brake don't mix, So spray down the entire surface with Brake Cleaner, or your gonna contaminate your brake pads and your brakes won't work properly. Your also spraying Brake cleaner on the other side as well (That includes drum brakes)
@RoadRunnerMeep
2 жыл бұрын
The exception is if it's a coated surface, you don't need brake cleaner then
@tdx7
7 жыл бұрын
Happy to see this : ) 360p SQUAD
@chrisfix
7 жыл бұрын
Awesome!
@tdx7
7 жыл бұрын
Wow you replied
@acesuth3231
3 жыл бұрын
“It’s held in by 2 nuts” “never drive it in dry, always use lube”
@johanarodriguez9955
3 жыл бұрын
This is incredible that just by fixing cars you get 7 million subscribers and i am new to this channel but wow i have learned a lot about cars congrats man!
@eduardov9630
4 жыл бұрын
Love your videos dude, I might never repair my own car but I learn a lot just watching you disassembling and reassembling everything. You're the best!!!
@1985_Honda_CRX_Si
4 жыл бұрын
Every time I look for one video I watch another. EVERYTIME
@chrisfix
4 жыл бұрын
Never a bad thing to be educated on different subjects :p
@dawnmiller5872
4 жыл бұрын
@@chrisfix hi Chris when are u doing a video all about welders and welding helmets I want you to do it today at 3-3:30
@xinlinwu4572
5 жыл бұрын
Chris the type of guy to give his old dish washer a paint job
@RaulMartinez-bw9mf
6 жыл бұрын
You are crazy good with your car. I appreciate someone that loves there vehicle as much as I do. It's just not a vehicle, it's what drives your life. I'll keep watching.
@bumvillestudios6678
3 жыл бұрын
I love how much thread locker he uses in his vids. Convinced his car is gonna fall into pieces lol
@chrisfix
3 жыл бұрын
You never know :p
@nick-tt1qm
7 жыл бұрын
I can't stand the smell of diff fluid it makes me cringe just thinking about it, for anyone who didn't know its like letting a whale decompose inside cat piss and then boiled
@chrisfix
7 жыл бұрын
+nick lol
@markkibbe1802
7 жыл бұрын
+nick Try burning diff fluid. My dad's Toyota Land Cruiser had the rear seal on the axle installed incorrectly, so there is a slow diff fluid leak. Every time the brakes heat up a lot, the stuff starts smoking like crazy and smells horrible.
@mrmiked6577
7 жыл бұрын
"for anyone who didn't know its like letting a whale decompose inside cat piss and then boiled" .... Well that sure cleared it up!
@theravedaddy
6 жыл бұрын
Yeah thats car diff oil, you need to smell the oil in a scammel trucks gearbox. I nearly barfed and that was exactly 40 years ago today. I can still remember that smell......
@mnjk80
6 жыл бұрын
nick Am I the only one who enjoys the smell of diff fluid?
@ep0516
5 жыл бұрын
Lmao i remember when i was little my dad was changing his rear brake callipers but he had the emergency brake on, then he was getting frustrated, he soon realized like an hour later 😂
@konturgestalter
4 жыл бұрын
man i love your videos so much. I learnt more about cars in 3 days watching your videos than ever before. I love the mechanical details you show. Thank you!!
@chrisfix
4 жыл бұрын
I'm glad you like the videos and you've learned a lot from them! Thanks a lot!
@lucasdueck5592
7 жыл бұрын
1:59 do i see a racing seat?
@chrisfix
7 жыл бұрын
;)
@mariuspoulsen7728
7 жыл бұрын
ChrisFix zcf
@jamesmuffins3330
7 жыл бұрын
lol, he installed then off camera. DO A VIDEO CHRIS.
@NoFVCKSGiven1337
7 жыл бұрын
He did
@xSupra
7 жыл бұрын
nice name m8
@sleeks9939
7 жыл бұрын
If YOU EVER get into formula D drifting I am going to hold a huge CHRISFIX SIGN. HAHA.
@justajarofalfredosauce389
4 жыл бұрын
Netflix: are you still watching ? Someones daughter: 12:31
@aesopwolf3126
4 жыл бұрын
What?
@CobnutVTS
4 жыл бұрын
@@aesopwolf3126 you are possibly too innocent for the joke
@aesopwolf3126
4 жыл бұрын
@@CobnutVTS or its just unfunny? I mean haha Sex such funny joke lololol haha did much laugh to me
@CobnutVTS
4 жыл бұрын
@@aesopwolf3126 i never said it was funny, you made out like you didn't understand
@aesopwolf3126
4 жыл бұрын
@@CobnutVTS i never Said i didn't understand the joke. U Just assumed that im 8 or Something
@leoschneider3570
2 жыл бұрын
Because of this channel I learned that even complicated stuff is easier than they would like you to think
@BuildThreadsNorway
7 жыл бұрын
So, is there such a thing as a quad caliper bracket?
@chrisfix
7 жыл бұрын
Probably not. You need some space for air to cool the rotor.
@BuildThreadsNorway
7 жыл бұрын
Ah, good point;)
@mp27310
6 жыл бұрын
It would probably just melt or explode due to the heat
@danielashworth5281
7 жыл бұрын
Best SN95 how to videos on KZitem.
@chrisfix
7 жыл бұрын
Thanks!
@007jhagga
3 жыл бұрын
I like the atention to detail, the way you clean the components and the paint them... I usually do the same when i work on my trucks. that is what separate the average guy to someone who likes to take care of their vehicles. nice job man .
@Backwater_Boonies
6 жыл бұрын
Hey man I appreciate the vid it helped out a lot thanks
@islamgomaa1096
7 жыл бұрын
Perfect
@chrisfix
7 жыл бұрын
Thanks!
@luischevere7382
2 жыл бұрын
All I can say is EXCELLENT !!!Happy you included the dual brake part for those of us that just wanted dual calipers.
@snigdhachuramani1777
4 жыл бұрын
Chris: this is a easy thing to assemble. Common hand tools Me: doesn’t know how to tie my shoelaces 🤨🤨
@beacher50_
4 жыл бұрын
*same*
@briankoz6622
3 жыл бұрын
Can i afford this? No Did i need this ? No Did i watch the entire video? Hell yes Hotel? Trivago
@dientxpro4613
7 жыл бұрын
a did see racing seat
@chrisfix
7 жыл бұрын
;)
@dell2295
7 жыл бұрын
always lube gents dont go in dry : D
@davidr4332
7 жыл бұрын
Unless she wet already , lol.
@Idoitfortheskonkas
6 жыл бұрын
Man I wish u were doing these videos back when I was an apprentice. My manager didn't show me shit and all I learned was from other mechanics at the shop and just trial & error. Ur doing an awesome job bruh ! Keep it up👍🏼
@lukajalo8635
3 жыл бұрын
my dad's friend's car literally crashed because the wheels came off on the rear guess this is the reason THE C CLIP
@ThePixelated_kris
6 ай бұрын
Oof
@yolowolfyt
4 ай бұрын
You're Definitely WRONG Lug nugts came loose.
@Zubberbilly
7 жыл бұрын
Haha I just started thinking of doing this to my mustang since it's not longer on DD duty. Must be a sign!
@chrisfix
7 жыл бұрын
Now you know exactly what to do!
@westcoastyeeyee4088
6 жыл бұрын
anti moan brackets... need one for my wife lol
@Phyoomz
5 жыл бұрын
yes... you do :-)
@blizteredthumbs7911
5 жыл бұрын
Depends on the type of moaning! You didn't wash those dishes! 100% ...pleasure? No chance! :D
@cheeesyyvids6083
4 жыл бұрын
Hey I need one too you have it? 😂🤣😂🤣😂🤣😂😂🤣😂🤣
@phantasyphotography3813
4 жыл бұрын
are you going to hold them in with 2 nuts?
@dodger9385
4 жыл бұрын
6:35 oh yeah
@RMDZ019
3 жыл бұрын
definitely Chris Fix's channel is one of the best by far!!
@WillCMUSICGAMESBLOG
4 жыл бұрын
Where did you get these? I’m looking for some for my crown vic which is a 31 spline 8.8
@pedrosousa8512
4 жыл бұрын
This guy is crazy like a nerd special tools car´s
@chrisfix
4 жыл бұрын
huh?
@nihaldm7492
5 жыл бұрын
Can you tell me How to install NOS ?
@2CATSCS
Жыл бұрын
I learned so much from your videos people Can see you put alot efort into your videos so thank you for putting that efort into your videos
@luisfonsi5698
7 жыл бұрын
can you make things about motorcycles?
@chrisfix
7 жыл бұрын
If only I had one!
@sanjaynandalall2260
7 жыл бұрын
8:03 how to be a chrisfix magician
@chrisfix
7 жыл бұрын
+Kevin N lol
@idiamondk746
7 жыл бұрын
my dad did this to my car and he needed to watch the video 20 times
@chrisfix
7 жыл бұрын
Glad the video was helpful!
@idiamondk746
7 жыл бұрын
this is why i love you, you always reply on your viewers comments and your videos are so helpful,that i made my own drift car
@diwa393
6 жыл бұрын
best videos from this channel are blinker fluid changes piston return spring and how to change them and howto change muffler bearings
@skrtskrt3429
7 жыл бұрын
Early af
@chrisfix
7 жыл бұрын
You are #3 early!
@MuscleCarMike
7 жыл бұрын
ChrisFix Can u do a video on Rust repair and surface rust cleaning
@chrisfix
7 жыл бұрын
I have rust repair on the list!
@axlgarage2444
7 жыл бұрын
ChrisFix can you do a video: how to inspect viscous coupling or how to see a good or bad viscous ?
@avianreynolds4906
7 жыл бұрын
do more
@chrisfix
7 жыл бұрын
YES!!!
@avianreynolds4906
7 жыл бұрын
Your video help
@avianreynolds4906
7 жыл бұрын
ChrisFix
@thejabstep9697
7 жыл бұрын
Buy a used 2016 S5, then APR Stage 2 + ultracharger, Awe touring exhaust, the rs5 grill, and new rims (as well as some black accents)(maybe brakes but pry not) or New GT350? Btw thank you for all the work you put into your videos Chris, I really appreciate it!
@chrisfix
7 жыл бұрын
+TheJABstep I wish I could afford that lol
@thejabstep9697
7 жыл бұрын
You replied to me...OOOOO... thanks man. Again keep up the awesome vids
Пікірлер: 6 М.