WOW! A lot of great skill/ingenuity to pull this off.... keep the updates coming!
@ParadiseBayCustoms
2 жыл бұрын
Thanks! Kind of you to say! I’m having a blast 👍
@infamousflav
2 жыл бұрын
THE BEST FLOOR PAN INSTALL IDEA EVER! A true demonstration of how careful planning can really make a difference. When I saw that floor plan slide in, I too felt that same sense of gratification ( I actually let out a "Oh, ho ho!"). Thanks sharing all your hard work-- truly inspiring. And thanks for putting time into all the work of filming and editing too!
@ParadiseBayCustoms
2 жыл бұрын
Thanks so much for saying… And watching. 👍 More coming soon.
@perrywe1
Жыл бұрын
really neat way to install in a car shell! Love the modified jig.
@ParadiseBayCustoms
Жыл бұрын
Thanks Wes. Finishing up the floor assembly now, getting ready to roll it back under one last time to weld it all together. Video coming soon. Appreciate the comment. Thanks again. 👍
@perrywe1
Жыл бұрын
@@ParadiseBayCustoms looking forward to that one!
@jamesmorse4827
2 жыл бұрын
Best floor pan video yet. I put mine in a few weeks ago this assures me of what I've done.
@ParadiseBayCustoms
2 жыл бұрын
Very cool! Thanks. Good luck with your build… What’s next?
@ElrodsGarage
2 жыл бұрын
That's working out pretty slick! I wish I had a bigger garage. LOL
@ParadiseBayCustoms
2 жыл бұрын
Thanks. Me too! Never big enough. LOL Not that I’m complaining. 👍
@johnnyhotrod
Жыл бұрын
Jealous of your skills,awesome job!
@ParadiseBayCustoms
Жыл бұрын
Thanks! Appreciate you watching and commenting. I keep working at it, always trying to improve. 🤪
@wrenchitwheelit312
2 жыл бұрын
I’m rebuilding a ‘67 convertible and I have a lot of work to do on it before I get to the floor pan. This is a great video and gives me a lot of good information. I have a channel as well and know how much time and effort it takes to put out content and get work done on the car. I’ve had a few mishaps along the way and have not worked on it for a while, but more is coming soon on mine. I’m on rockers right now, driver’s side is in and passenger side is almost completely out. The convertible rockers are more reinforced and pretty heavy. Great videos and keep up the good work!
@ParadiseBayCustoms
2 жыл бұрын
Thanks. I’ve been following your build (and mishaps) too… Look forward to seeing yours progress. Keep the videos coming. 👍
@VinylVillageGarage
2 жыл бұрын
Really like the home made engineering, work smarter not harder, thanks for sharing!
@ParadiseBayCustoms
2 жыл бұрын
Thanks! Much appreciated.
@dayslife
2 жыл бұрын
very technical well planned fitting approach . nicely accomplished!
@ParadiseBayCustoms
2 жыл бұрын
Thanks for saying. Appreciate it. 👍
@elsdp-4560
2 жыл бұрын
Thank you for sharing. Fantastic job and yes it really does feel great to stand back and see those new panels in place but really feels good is when there welded in. 👍👀
@ParadiseBayCustoms
2 жыл бұрын
😂😂😂 Indeed! It’s a process as I’m fond of saying. LOL
@hotrodsrx
2 жыл бұрын
Great job.
@ParadiseBayCustoms
2 жыл бұрын
Thanks. 👍
@charlieseidelmann6702
2 жыл бұрын
Very nicely done! Your attention to fitment and sequencing is great! Question: are you also a rail fan or employee?
@ParadiseBayCustoms
2 жыл бұрын
Thanks! My late father worked on the passenger trains (CP then VIA)… It’s a long service plaque that he was given. Nice to have a piece of him in the workshop with me ❤️. Good eye 😉
@dayslife
2 жыл бұрын
your engineering revision in design improvement is part of any good process, no snag there ... , 👍
@ParadiseBayCustoms
2 жыл бұрын
👍
@MrFireman164
2 жыл бұрын
Looks awesome… Dynacorn is made in Taiwan but AMD is the best sheetmetal made in Taiwan.
@ParadiseBayCustoms
2 жыл бұрын
Thanks. That’s what I’ve heard. No complaints here so far. Time will tell.
@MrFireman164
2 жыл бұрын
@@ParadiseBayCustoms same steel
@ptek1185
2 жыл бұрын
That split frame jig is brilliant! I didn't quite understand the purpose of it in the last video, but it is clear now. Great idea. LOL - Dynscorn at kzitem.info/news/bejne/kYqXl3efoYplq4I A freudian slip?
@ParadiseBayCustoms
2 жыл бұрын
Thanks!!! I noticed the typo the second I uploaded it to KZitem. Ugh! 🤪 Jig gets better in the next video… I’ve fab’d up some receiver tubes so I can slip it on and off my rotisserie in minutes. 👍
@TheLooper0
2 жыл бұрын
Nice! Are you an engineer ? A lot of thought went into that jig setup. My floors are Dynacorn as well and I have to say they fit well too. I’m trying to go with AMD on all the outer panels if they are available.
@ParadiseBayCustoms
2 жыл бұрын
Close… Architect. 😂 Just a gear head at heart. The build has been a creative release through the pandemic and a great way to pass a cold winter. Thanks for watching and commenting. What’s next on your project?
@TheLooper0
2 жыл бұрын
😄The word tolerance in your description made me wonder. I just finished welding in the new lower cowl, outer cowls and firewall, Lots of grinding to do. Quarter panels are next.
@ParadiseBayCustoms
2 жыл бұрын
@@TheLooper0 Sounds like you are a few steps ahead of me. Fine job. I’m still debating on my quarters even though I have new ones on hand. I’m letting the notion of replacing them percolate as I’m fond of saying! 😂
Пікірлер: 39