That was a really good video. You did a nice job of placing the camera, and you explained it well! Good for you!
@GlobalWestSuspension
3 жыл бұрын
Thanks for the compliment hope the video helped!
@HVACENGINEER94
3 ай бұрын
Looks to be the same as the G body, I’m in market for tubular arms and V coil overs Thank you for a great video
@GlobalWestSuspension
3 ай бұрын
Yes sir, the process is the same.
@gerwin2943
4 ай бұрын
Don't forget to get an alignment after setting your ride height
@GlobalWestSuspension
4 ай бұрын
Yes very true! If you need our alignment specs, they are on our website. WWW.Globalwest.net
@danieldreisbach6667
2 жыл бұрын
On stock control arms I don't believe the area where the shock originally bolted in is strong enough to hold up all the weight. At least not for long term use when the weight was originally meant to be spread out around the whole spring pocket area of the arm.. I believe Lower control should always be strengthened or an after market control arm should be used.
@dumbangel6795
6 жыл бұрын
Wow, great video. Thanks for posting, Doug!
@GlobalWestSuspension
3 жыл бұрын
Glad we could help!
@ricardoallende2597
9 жыл бұрын
Good tutorial, thanks
@GlobalWestSuspension
9 жыл бұрын
Thanks for watching Richard!
@rodpalm6398
3 жыл бұрын
Finally we talk about indexing the spring which by the way can't be done correctly if you cut the stock spring using stock lowers. You didn't say a thing about it in the spring cutting video, but you SHOULD HAVE. That spindle looks awfully short compared to the ones I got from you guys in the early 90's.
@GlobalWestSuspension
3 жыл бұрын
Good luck with your build!
@jasonsteer7158
9 жыл бұрын
Great video, I'm just about to do this so it was a lot of help. Thank you!
@GlobalWestSuspension
3 жыл бұрын
Hope the video helped!
@brcebrce83
9 жыл бұрын
Great info!!!
@GlobalWestSuspension
9 жыл бұрын
Thanks for watching! We are glad that you like the video--share if you know someone who can use the info also. Thanks!
@michaelthomas-cq9xv
Жыл бұрын
Please tell us what is the advantage OF using coilovers, no one ever says.thanks
@GlobalWestSuspension
Жыл бұрын
Great video suggestion, we will get one out there. 💪
@williambirnbaum1501
5 жыл бұрын
Doug..great video...a few questions for my 1969 El Camino , with a 350 engine, automatic 200r4. Standard front end, would like to drop down 1" . 1) What coil over part number, for a daily driver should I use...for a 1" drop ?? 2)Do you need to do another front end alignment, after final adjustments?? Thanks for the education...very helpful
@GlobalWestSuspension
3 жыл бұрын
Thanks for the kind words and support! For the most accurate response to your question give our tech line a call! 877-470-2975
@steelcitycaprice.899
5 ай бұрын
👂🏽👍🏽😎🏁🏁🏁
@slickrickjones
4 жыл бұрын
Damn good video of showing!
@GlobalWestSuspension
3 жыл бұрын
Hope it helped!
@MrSprintcat
7 жыл бұрын
I have your kit ,and it is awesome. my question is when setting the ride height in the front r we looking for the lower control arms to be level with the ground ? thanks
@GlobalWestSuspension
7 жыл бұрын
Call us, we will help you out. 1-877-470-2975
@leonsinclair2012
7 жыл бұрын
H
@philortega6516
6 жыл бұрын
MrSprintcat ,it's not the arm that needs to be level,it's the center of the bushing pivot point and the frame,in line with the center line of the ball joint ball center line.
@elwrencho8189
4 жыл бұрын
Awesome video are coil overs good for daily street driving?
@cuzz63
4 жыл бұрын
Yes they are. All your basically doing is moving the bottom of the spring off the lower control arm and moving it to the shock. This allows you to adjust the height and travel. And it looks cool
@GlobalWestSuspension
3 жыл бұрын
Thanks for the compliment! For the most accurate response to your question give our tech line a call! 877-470-2975
@LSxHTX
5 жыл бұрын
My shocks were a lot harder to install into the lower control arm. I had to really push them in towards the frame. I hope I didn't bend them
@GlobalWestSuspension
3 жыл бұрын
hopefully they are not bent!
@ttime4547
8 жыл бұрын
purchased front and rear viking coilover kit .. amazing company to deal with and great help.. just one question the viking components are all silver.. how come I received global west marked front springs with the kit?..they are black instead of silver?
@GlobalWestSuspension
8 жыл бұрын
+Thomas Racioppo Hello Thomas, we will be glad to answer your question. Give us a call at 1-877-470-2975; we close at 5 p.m. Pacific Time.
@paulmontoya8994
Жыл бұрын
this is a very nice product. But in my experience when you change the car height, it puts the car out of alignment.
@adolfofernandezfuentes6418
Жыл бұрын
Podemos adaptar ese sistema a un cherolet 1955?
@andreelaine9137
7 жыл бұрын
Do i need tubular arms or does the kitt fit stock arms?
@my55chevy43
4 жыл бұрын
Yes stock will work
@GlobalWestSuspension
3 жыл бұрын
Give our tech experts a call to get that question answered ASAP! 877-470-2975
Пікірлер: 41