for the dead pedal - its way easier to get the panel off if you remove the hood release handle. Super easy to do - its just a simple clip on the back that easily access with a small trim tool or flat head screw driver.
@AJLoDato22
21 күн бұрын
Thanks for the insight 🤙🏼
@zahimiibrahim3602
Жыл бұрын
Nice. From the look of it you don't even need to remove the gas pedal, just glue the cover on and use zip ties or duct tape till it sets.
@Skoalcwby77
19 күн бұрын
I'm hoping thats the case, and what I'm going to try first. I did order the tool on ebay that will be here in 2 months lol I called VW and it was $70...no thank you.
@Blackcheddar
3 жыл бұрын
I think the reason the gas pedal doesn't clip on like intended is because these were designed for UK/European versions where the gas pedal is slightly different.
@AJLoDato22
3 жыл бұрын
Shoot, you could be right. Definitely not made for this gas pedal that’s for sure.
@riropower
Жыл бұрын
For the foot rest you don‘t need to remove the panel. Just pull it back with one hand and have a friend unscrew the screw
@PERLaLIFE
3 жыл бұрын
Im now selling my 2011 golf 1,6 tdi, and ive already bought a passat alltrack 2013 2,0tdi with dq250 dsg. Im hoping to get some use for the towing hook, and the awd is just nice especially if im gonna go camping with the car, I wanna use the trunk/rear seat space and sleep in it, seems like really fun adventure too do with someone! Ofc the passat has higher ground clearance but it still feels sporiter, most likely due too also stiffer suspension or something and wider wheel base.
@AJLoDato22
3 жыл бұрын
That’s awesome. Sounds like a good rig for what you’re trying to do with it. And the 2.0tdi is bullet proof.
@haythembelhassenomoi
2 жыл бұрын
Good mod for sure! And the clean install with epoxy! Is just fine! It's the way we have to do. Thank you!
@enofier4883
3 жыл бұрын
the best video bro really
@AJLoDato22
3 жыл бұрын
I appreciate it!!
@mikehowell6874
Жыл бұрын
Hey thanks this will add to my GTD conversion
@s.schwarz4864
Жыл бұрын
.... looks so much better, AMAZING!!!!!
@tristentrujillo5436
3 жыл бұрын
I was about to do this for mine but the install just looked too much for me 😂
@AJLoDato22
3 жыл бұрын
Haha it really wasn’t too bad. It would have went smoother if I had a video that showed me all of the kinks like this does. Probably 30min total.
@ondrashorak
3 жыл бұрын
Hello, do you think that it would be possible to do the last step (acceleration pedal) also on its place, without disconnesting and removing it from car?
@AJLoDato22
3 жыл бұрын
Yes most definitely. It’ll be harder, but definitely do-able.
@bobbybob6597
3 жыл бұрын
Looks good. Good job
@tiborsomogyvari2710
4 ай бұрын
Your gas pedal is round too like mine. And thats problem if the alu isnt round? Just one half is round. I was search this and only 2.0 tdi has full round gaspedal. Can you answer to me?
@AJLoDato22
4 ай бұрын
I didn’t have any issues with the round top on the pedal. I believe the squared off corner just overhung a little bit. Hope this helps!
@wolvoman1
Жыл бұрын
You didn't need too remove the pedal, just glue it over the top
@Ramman1995
3 жыл бұрын
How are the pedals holding up so far? Just ordered a set for my 12' Jetta Sportwagen
@AJLoDato22
3 жыл бұрын
They held up perfect. I sold the car about three months after install. 10/10 recommend.
@wesleyhoare789
3 жыл бұрын
I'm trying to do it with a tiguan similar though
@Je_luna
6 ай бұрын
Thank kind sir. But you think getting a pedal from a r line or gti bolt right up with out any issues?
@AJLoDato22
6 ай бұрын
Yup I think that would work, too.
@Automotivepanda
7 ай бұрын
I just got the same set from temu i will be installing it soon how does it feel on the feet please let me know 😊
@AJLoDato22
7 ай бұрын
It feels much better than stock - but I was in it for the looks. Love it!
@Automotivepanda
7 ай бұрын
@@AJLoDato22 awesome man good to hear Yeah it looks great as wel thanks for the quick reply 💪
@wesleyhoare789
3 жыл бұрын
Ya the foot rest one for the 2014 Tiguan it isn't worth the fighting with cause u have to take ur hood lever off an then try to not brake ur clips honestly I watched a video on it I cant understand how to get the lever off even they there's a clip but I can't really find it
@JilanieSan
2 жыл бұрын
Bro, when you unplug the accelerator, can you just plug it back in and everything works still the same? Or do you have to program the accelerator again? If you get what I mean..
@AJLoDato22
2 жыл бұрын
I just plugged mine back in and had no issues!
@envergovori1573
3 жыл бұрын
is this golf a 2.0 tdi
@AJLoDato22
3 жыл бұрын
That’s correct
@Sam-tw2sr
2 жыл бұрын
Anyone know where i can get those snips from in the UK, ive had a couple off amazon+neither of them worked 🤦🏼♂️
@liveyoursfrom-t288gb
2 жыл бұрын
Ebay
@Sam-tw2sr
2 жыл бұрын
Hey great video. Im in the same situation, i want to try stick the accelerator down+trim the metal edges off. What tool/adhesive would i need?
@AJLoDato22
2 жыл бұрын
I used metal snips to clip the tabs off. And JB Weld clearweld for the adhesive
@Sam-tw2sr
2 жыл бұрын
@@AJLoDato22 hi any advice on which clips to use. I got some off amazon but they are rubbish they didnt even come close to snipping the overlapping bits off that you showed on the video. Thanks in advance!
@michaelfrascati7610
3 жыл бұрын
Thanks!
@mdk8783
3 жыл бұрын
Hi, what's the glue you have used ? Thanks
@AJLoDato22
3 жыл бұрын
It’s a JB Weld ‘KwikWeld’ I believe.
@mdk8783
3 жыл бұрын
@@AJLoDato22 okay thanks, how long did it take to hold/dry ? The glue is transparent ? Because i have found it but it's A and B glue which is gray !
@AJLoDato22
3 жыл бұрын
Shoot scratch that I think I used ‘clear weld’. Mine was clear and took about 10min to fully cure to where I felt comfortable taking the c clamps off.
@mdk8783
3 жыл бұрын
@@AJLoDato22 okay great ! thanks for helping me
@giuliano18o9_5
3 жыл бұрын
Bro how tf you get off the Plastik in the legt
@AJLoDato22
3 жыл бұрын
It was super hard honestly. I heard you can take the hood release handle off to make it easier.
@steliosh
3 жыл бұрын
Forgive me for saying this but you should have done some research before doing this video! I'm afraid there are two parts where you really go like an amateur: 1st is grabbing that plastic on the left, and passing front boot handle through it. I wonder how, if ever you put it back?! It's quite easy to remove the handle, then remove a small plastic screw and remove the plastic. Second thing: is the removal of the throttle pedal. You surely can grab it and force it out, but I'm sure your pedal will now... move a little. With a little research, again, you should be able to remove the throttle pedal EASILY with the use of to small flathead screwdrivers. Not by... brute force! Sorry, again, but this video is not helpful at ALL.
Пікірлер: 55