You have no idea how grateful I am to you for telling us the difference between the shelf and door jamb needed. I've been searching KZitem 3 hrs to figure it out lol! (28.25" shelf for a 30" jamb opening )
@TheWoodlandReboot
3 жыл бұрын
You're welcome! Thanks for watching and glad it was helpful. Peter at the Reboot.
@ashleygutierrez1091
Жыл бұрын
@@TheWoodlandReboot I need some help on the math portion
@hanab9460
Жыл бұрын
This is exactly what my husband & I have been talking about for years. I love your video, plan to show my husband, maybe he'll surprise me. You did a great job & having your son help, good experience for him too. Will have one of our sons help out also. Love the finished project, it's Beautiful!
@TheWoodlandReboot
Жыл бұрын
Many thanks for the kind words! Good luck with your project.
@photoprescott2499
3 жыл бұрын
Super. It would have been nice to see the other side, too 🥰
@TheWoodlandReboot
3 жыл бұрын
Good point. If you send your email to 'thewoodlandreboot@gmail.com' I can send a photo or two of the back of the door.
@marierin2481
Жыл бұрын
Thanks for this video! This is exactly what I want to do, but under a staircase that has a crawlspace access.
@TheWoodlandReboot
Жыл бұрын
Glad it was helpful!
@donmacdonald7758
4 жыл бұрын
Great project and nice finishing. A good and fun idea.
@TheWoodlandReboot
4 жыл бұрын
Thanks Don. It was a fun project to put together. Peter at the Reboot.
@TheWoodlandReboot
Жыл бұрын
Hi Kim, yes, my doorways are deep. The doors sit at the back so there is a space of 6 inches in which I could add a shelf with 5.5 inches of depth. Hope this helps.
@anzaal
3 жыл бұрын
Clever design. You do nice work. Secret ? ? The transom window above and the electrical light switches to the left, kinda give it away though.
@TheWoodlandReboot
3 жыл бұрын
Thanks again Anzaal. Yes, my plan is to make a removable cover for the transom. The light switches to the left are for the front hall area not my office. Peter at the Reboot.
@1DanielleLouise
2 жыл бұрын
I was just thinking, I wonder if stuff falls off the shelves much, and then I remembered I have this jar of stuff called museum gel that is supposed to be exactly for keeping things on shelves. So if you have that issue, maybe give that stuff a try lol. Thanks for sharing your idea! I had not thought of using a castor and weight was definitely a concern.
@TheWoodlandReboot
Жыл бұрын
I open the door slowly and all stays in place. Museum gel sounds like a great idea.
@carlosparra437
Жыл бұрын
Excelente trabajo ese quería ver en el que usará bisagras normales de puerta ,aunque me hubiera gustado ver el vídeo donde dónde la instalaba en el marco si le rebajaba ala madera para poner la bisagra ,saludos desde de ch Obregón ,sonora mex
@fermageehamilton1402
2 жыл бұрын
Wow, these doors are priced between 1000 - 3000 dollars…. This is what I’m gona do 👍
@TheWoodlandReboot
2 жыл бұрын
It is a good option given the prices in the stores.
@koontzman123
3 жыл бұрын
Excellent job, you have a lot of fun projects. I just watched the pole barn and rust repair vids. Looking forward to the paint job.
@TheWoodlandReboot
3 жыл бұрын
Thanks Steve. I hope to have the final rust repair video posted in the next week or so. Peter at the Reboot.
@brokenotbroken25
2 жыл бұрын
Love this so much
@TheWoodlandReboot
2 жыл бұрын
Thanks!
@kokitrees7394
2 жыл бұрын
This is so cool! Now if only landlords would let you replace doors :'(
@TheWoodlandReboot
2 жыл бұрын
Thanks and maybe you could surprise your landlord!
@user-T89
5 ай бұрын
This is great, thanks so much for sharing! Could you explain the equation you used to calculate the 28.25" for the jamb opening?
@TheWoodlandReboot
5 ай бұрын
It's been a while since I did this. I believe I did a mock-up with some rulers to calculate the opening. Unfortunately, I did not use an equation.
@jaromejacksan6934
3 жыл бұрын
There are many similar projects in Woodglut's plans.
@TheWoodlandReboot
3 жыл бұрын
👍
@MrPhillyval
3 жыл бұрын
Good job ! But why those blocks instead of more screws in the shelves themselves and in the long side bords ? It would have been more discrete, wouldn't it ?
@TheWoodlandReboot
3 жыл бұрын
Good questions. I went with the blocks because my shelves are less than an inch thick, i.e. very thin. I thought I'd miss with screws and I like the extra support/strength the blocks provide. Screws would have been more discrete for sure. Thanks for watching! Peter at the Reboot.
@sergeantc4073
2 жыл бұрын
This is exactly what I was hoping to find to disguise my master bedroom door from the other two guest room doors for added night time security. My door opens inward like yours and I believe it's the same size opening . Just need to begin buying the materials and check for all required tools to get this project done I don't have a helper like you so that part I will have to figure out later. What wheel caster did you end up using under the door ?. Do you have a part number or link to order me one ?. Thank you for this excellent idea and videos . SergeantC
@TheWoodlandReboot
2 жыл бұрын
Welcome!
@TrouverParadise
Жыл бұрын
So, regular hinges would work? I put a case on wheels, but I'm trying to figure out the hinge part. Mine is heavy
@TrouverParadise
Жыл бұрын
I want it to open forward rather than backward
@kimmcintyre5341
Жыл бұрын
Is your doorway 6 inches in depth? Mine is only 3inches. How did you make it flush and use the door?
@TheWoodlandReboot
Жыл бұрын
My doorway is 6 inches deep. I have shelves mounted on the door. The shelves with the trim make it all look flush.
@diegodavila1429
2 жыл бұрын
Can you put the tipe of hinges you used for the door please and the mesures of the door jam and the deepnof the shelfes
@TheWoodlandReboot
2 жыл бұрын
The hinges came from the original door. The wheel underneath shares the load.
@stevenwatkins2373
2 жыл бұрын
What size or type of wheel
@joshuanicholsjr5327
3 жыл бұрын
how are you going to hide in the room when there is a stairs in it it's a hallway god bless I like the build
@TheWoodlandReboot
3 жыл бұрын
Thanks Joshua. You make a good point. My plan is to make a cover for the transom. Peter at the Reboot
@curtisphillips3219
2 жыл бұрын
Why would you make a hidden door /room and put a window at the top?
@TheWoodlandReboot
2 жыл бұрын
The transom was original to the existing door. I have a panel I use to cover it; however, I made the cover after the video. It is not a big issue. Most visitors don't know it is a door whether the transom is covered or not.
@BeerChaser1403
3 жыл бұрын
Did you put new trim over the old trim?
@TheWoodlandReboot
3 жыл бұрын
Hi Angel, Yes that is what I did. I have the old door and by covering the existing trim, I can change it back very easily should I want to. Thanks for watching. Peter at the Reboot.
@bla1de
2 жыл бұрын
How did you make it flush when mounting it to the door
@TheWoodlandReboot
2 жыл бұрын
I put spacers under the door. Also, I have a wheel under the door as part of the system.
Пікірлер: 48