Excellent how to video! Our Craftsman T240 has a 7000 725 22HP engine and this was exactly what I needed to DIY. Thanks
@JohnsonsSmallEngines
4 күн бұрын
I'm glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
@jamessirman6622
11 ай бұрын
I've been looking for a demo on coil installation for the Kohler KT740 25hp for a while. This the best install video I have seen on any small engine. You did a terrific job and did not waste anytime. Showing the removal of the engine cover was very important and something that most people do not show. Thanks for a great video.
@JohnsonsSmallEngines
11 ай бұрын
I’m glad you found what you were looking for and thank you for the kind comment! Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
@robertmailhos8159
Жыл бұрын
Strange thing is that the Briggs and Stratton opposed twin cylinder engine uses a single ignition coil system for both of the spark plugs I have a twin cylinder Kohler pro series engine on my craftsman gt tractor glad you made this video on this matter of the ignition coil system for a twin cylinder Kohler engine Brad
@JohnsonsSmallEngines
Жыл бұрын
Yes, and when the ignition failed on the old opposed twin Briggs, it didn’t run! Very easy to diagnose. The good all days! thank you for watching, commenting and supporting my channel!
@robertmailhos8159
Жыл бұрын
@@JohnsonsSmallEngines your welcome Brad 👍😎😁
@bigmackstruckstop9213
Жыл бұрын
Thank you for the video Brad, my John deere tractor D110 is 11 years old you help me with a lot of things and I'm gonna buy a new engine next month and I'll catch ya on the next one.
@JohnsonsSmallEngines
Жыл бұрын
I hope all goes good with the new engine! Thank you for watching, commenting and supporting my channel!
@bigmackstruckstop9213
Жыл бұрын
@@JohnsonsSmallEngines your very welcome Brad, I'll keep you posted when I do this project.
@michaelfarris2556
Жыл бұрын
Fine vedio here I'm a fan of the kholer engine. But mainly the older ones with metal. I have the 600 series but I'm sure it's going to be the same process. But you maid this look like a walk in the park. Job well done
@johnjones6077
3 ай бұрын
Your vids are very helpful, thank you for teaching me about my Kohler 7000 series
@JohnsonsSmallEngines
2 ай бұрын
I'm glad it was helpful! Thank you for watching and the kind comment.
@bjayscanlon
2 ай бұрын
Thanks a bunch. Helps me out a great deal! I have a lot of mowers and tons of mice.
@JohnsonsSmallEngines
2 ай бұрын
Glad to help!
@matthewmarek1467
Ай бұрын
I have had all sorts of trouble with this engine shaking the rear mounting bolts loose. You press on the back and down it goes. The first time, it broke one of the exhaust manifolds/pipes as it had lost 3/4 of the mounting bolts. Now I'm always checking.
@jdougmcdonald418
4 ай бұрын
Great video but where does one get a piece of 10/1000 plastic? or something else to measure?
@USAFPJ2Sailaway
2 ай бұрын
I need something to measure this. Will a poker playing card work?
@JoshHolmes-ht9tn
4 ай бұрын
Hello. Great video. I have this engine and found mice have chewed the wires. How hard is it to change the wiring?
@frogfoot198
Жыл бұрын
Mine is a 730 Kohler and it's the same part number as the 735.
@JohnsonsSmallEngines
Жыл бұрын
Thanks for the info!
@billthestinker
3 ай бұрын
Great instruction thank you so much
@JohnsonsSmallEngines
3 ай бұрын
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow! It would be greatly appreciated. Thank you for watching.
@Mark-qq9cd
5 ай бұрын
Very clear explanation. Thank you.
@JohnsonsSmallEngines
5 ай бұрын
I'm glad it was helpful and thank you for the kind comment!
@Mark-qq9cd
5 ай бұрын
@@JohnsonsSmallEngines I should have watched your video first. I did a bunch of work on, setting them and checking the rod thinking that’s why “she” was struggling. I did check spark and was getting it on both cylinders. So, I sent her to the shop and I found out that it was the coil. Probably gonna’ cost me $ 250 for the repair. They did pick it a up and drop it off. Next time I’ll reach out to you!
@JAU-pg9ct
25 күн бұрын
I have been having issues with surging this season especially when the PTO is engaged. I have replaced everything from a new oem carb, linkage, wind vane, fuel filter, new fuel, spark plugs . Could this be a possibility to cause surging? Maybe due to mice damage. I’m ready to throw in the towel.
@JohnsonsSmallEngines
25 күн бұрын
Without seeing the macchine and hear it running, it is impossible to try and diagnose but here are a few things, (1) Does the engine surge at 3/4 throttle? or just at full speed? If it surges at full speed only, you may have to adjust the governor as the engine will surge if it is revving to fast. Check your high speed rpms. (2) you may have a clogged fuel line from the tank to the fuel pump, or from fuel pump to carburetor. (3) you may have a fuel pump failing "but I do not come across many failed fuel pumps"
@rickdff62
Жыл бұрын
I have the exact same mower and have never seen the shroud "shake" like that, lol. Wonder what could be causing that as it's clearly tightened down. Mine only has about 150 hrs on the clock (bought used with very low hrs.) so maybe just age? It does make me feel good that it's made it to 600+ hrs and still looks and runs good as I only put about 50 hrs a year on mine. Great video!
@JohnsonsSmallEngines
Жыл бұрын
That shake was only caught on video. I checked it more than once after I played it back and it does not shake off camera. Very very strange. i’m thinking vibration while taking the video on the camera side when engine was running.
@rickdff62
Жыл бұрын
@@JohnsonsSmallEngines Ah, yeah, that makes sense. Cheers.
@tiggerfink
4 ай бұрын
I have a bad-boy MZ Magnum with a KT740-3048 engine. I hope my two 32 584 06-S ignition coils arrives tomorrow. On the kohler website it shows a RFI 25 132 14-S spark plug for my engine model. The champion version is 982 xc12yc. Badboy sells a RC12YC or a ngk -bk55e 7938 spark plug for my mower. Therefore I am confused on which spark plug to use. Kohler and badboy recommends two different type of spark plugs.
@JohnsonsSmallEngines
4 ай бұрын
It’s the same engine so both are fine. I use the equivalent of a champion RC12YC in a NGK version. I prefer NGK plugs.
@tiggerfink
4 ай бұрын
I replaced my two ignition coils with a "Kohler 2 Pack Genuine 32-584-06-S Ignition Module OEM" from Amazon. I can mow up hill and my mower does not shut off after an hour. My mower runs like it was the first day. I love these videos. I could not wait for 4 weeks at the repair shop.
@markdicke6285
2 ай бұрын
Did this and still no spark in the cylinder don't see any mice damage what do I check next all wires seem ok only change 1 coil 300 hrs kohler 748
@JohnsonsSmallEngines
2 ай бұрын
If your saying you replaced a coils and it still doesn’t have spark in the new coils?? If this is the case, disconnect the kill wire to the coils and check spark again. Your coils should now have spark (if it is a good coil). If you don’t have spark you have bad coils. You will need to figure out wiring issues. Impossible to diagnose without seeing the machine. I am saying coils because this engine in my video is a twin cylinder engine which has two coils. I’m not sure what engine your working on
@joeganusi8522
3 ай бұрын
Brad, why do Kohler command v twin engines have one coil going one way, and the other side is upside down or reverse?? Anyone know the reason for this?
Пікірлер: 37