As a multiple Vulcan owner, I can certainly appreciate this bracket. 1700Nomad & 1700Vaquero. Both 2011's.
@EngineeredAdapters
Жыл бұрын
Everyone should be a multiple Vulcan owner, right? This bracket will work on the Nomad but our Voyager/Vaquero bracket is suited for your cowboy! If anyone is looking for that, you can find that install video here: kzitem.info/news/bejne/t5CQsYFjaYGlnqQ
@AdoptedYooper
3 жыл бұрын
I installed my LED headlight & passing lights on my voyager this winter. The adapters worked like magic! I also used your amp mount & speaker mounts to upgrade my sound system. Thanks Randy!
@EngineeredAdapters
Жыл бұрын
Mark, we truly appreciate it when customers choose to spend their hard-earned money on our products. It adds up quick when we accessorize our scoots but when you purchase from EA, you are supporting a small, family-owned business manufacturing in the US! Thank you for that!
@sirdroll
6 ай бұрын
I had to tweak a couple minor items during the install, but it's on the bike with an LED lamp. A couple of my issues on a 2023 Kawi 900: the lamp wouldn't allow for a proper seating of the chrome ring and the bracket. The lamp I purchased had an edge that was approximately 1/4 thicker than others that I've seen installed on KZitem. But I had three 3/4" stainless, hex head screws; so that worked out. One of the two openings for the two nylon nuts was too narrow, but a quick brush against my belt sander did the trick. All in all, the bracket, while pricey, was the only solution I could find to add the illumination and aesthetic I was after.
@EngineeredAdapters
5 ай бұрын
Thank you for the feedback. We are making some minor tweaks to the nut well so it won't be too tight. Aside from sanding the nut, another solution would be to gently pry open the folded tabs - they are sometimes over-folded. Can you advise which headlight you used?
@dustinlee4566
Жыл бұрын
I just bought a light like that yesterday for my Vulcan and I've already got it on the marketplace because I couldn't get it to fit I'm very happy I found this now I'm about to go take my headlight off the marketplace and order an adapter
@EngineeredAdapters
Жыл бұрын
Fantastic! Glad you found us! Help spread the word and you can leave a review on our product page as well! engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@mbarr1029
3 жыл бұрын
Nice post there Randy, And THANK YOU for my Vaquero bracket I love my JW Speaker headlamp. You have taken Greg's and Shane's hacks to a new level
@Tawni.6269
2 жыл бұрын
Thank you Randy at engineered adapters. 🗨️😎👍
@EngineeredAdapters
Жыл бұрын
No, Thank you, E.D.W. for your purchase which supports a small, family-owned business manufacturing here in the US!
@DNiddy
3 жыл бұрын
Perfection. Btw, I've owned an angled screwdriver for quite awhile. easily removes that 'hidden screw' on the adjustment bracket. They are very inexpensive and really should come with this "kit".
@ricardopr54
5 ай бұрын
Im buying a new 2024 Kawasaki Vulcan classic lt soon, and I'll definitely order this product right away...😁 Thanks for the video...New subscriber and client here...😁 Have a great rest of your day 👍🏾 😁Greetings from Douglas, Arizona 👍🏾😁🇵🇷🌵
@markj4594
10 күн бұрын
I just purchased a 2024 Vulcan classic and it works well so far.
@jmoon2454
3 жыл бұрын
Finally, something good for my 2011 Vulcan 900 Classic. Thank you
@mitchelltaylor8282
2 жыл бұрын
Just shared in the VN2000 group. Going to make people happy. Hard to find anything for the 2000 anymore.
@EngineeredAdapters
2 жыл бұрын
Thanks for spreading the word. Be advised, this will not fit the large nacelle!
@mitchelltaylor8282
2 жыл бұрын
@@EngineeredAdapters the woes have already begun to pour in about the nacelle in the group. lol. Lots of people liking this post though. Thank you for bringing this to market!
@tonyclauson5654
2 жыл бұрын
Wish it was in stock. I’d buy it today
@EngineeredAdapters
2 жыл бұрын
Back in stock!!
@DoItALLForWe
5 ай бұрын
I’ve got a 2004 Vulcan 800 classic. Any idea if this might fit? Didn’t see my bike as an option on the website but figured maybe it’d still work.
@EngineeredAdapters
5 ай бұрын
Kawasaki was using several different brackets on their bikes in the early 2000's and the 800, while I believe to be a 7" light, has a different bracket that is no compatible.
@henrom123
11 ай бұрын
I am interested in your product, but I can not see where you are located. Even on your homepage you have not reveled where your company is located. Not even a telephone number.
@EngineeredAdapters
9 ай бұрын
We are located in Ohio, USA. We manufacture and ship from here. Preferred contact is via email: engineeredadapters @ gmail . com (spaced out to avoid bots...there are no spaces in the email address).
@Gabbiano88
5 ай бұрын
I need to order this for my 2020 900....
@EngineeredAdapters
5 ай бұрын
900 Classic or 900 Classic LT? If so, here is where to buy engineeredadapters.com/product/vulcan-led-headlight-mounting-ring/
@lyingliar
4 ай бұрын
I’d like to know why this won’t work for a 2005 Vulcan 800 classic? Is it something a mechanic can modify?
@EngineeredAdapters
4 ай бұрын
The bracket on the 800 is not similar enough. It does not lend itself to being modified to fit.
@markj4594
10 күн бұрын
I have a 2024 Vulcan 900 classic and so far the headlight works well. Installing took longer than a half hour due to the nylon nuts being too thick. I shaved them down and the fit perfectly. So far this is a very good product.
@EngineeredAdapters
10 күн бұрын
Thank you for the feedback! We are glad it is working well for you, and you are happy with it. The tabs in the nutwell sometimes get bent in just a bit too far. Some customers have reported they need to shave the nut but another option is to apply pressure to the tabs and bend them open just a bit and the nylon nut will slip in.
@markj4594
10 күн бұрын
@@EngineeredAdapters that's true. Now I believe I have to adjust the vertical direction of the head light.
@Wheels2183
2 жыл бұрын
So why not for the 900 Custom? Is there something different between the custom and the classic HL assembly?
@EngineeredAdapters
Жыл бұрын
The 900 Custom uses a different bracket. Isn't that also a 5-3/4" headlight? Trust us, we would like it to be compatible
@diversionplateau3857
25 күн бұрын
not sure from where can I buy that adaptor please??
@EngineeredAdapters
25 күн бұрын
Here is the link: engineeredadapters.com/product/vulcan-led-headlight-mounting-ring/
@VN1700CUSTOM
7 ай бұрын
I needed this now I have it after ordering some Amazon mounting ring adapter that didn’t fit that they said fit #THANK YOU Vulcan 1700 classic
@EngineeredAdapters
7 ай бұрын
So many manufacturers state their lights will "fit" but do not have the proper adapter to do so. Glad you found us!
@ronsmith4325
5 ай бұрын
Nothing for the Vulcan 900 Custom??
@EngineeredAdapters
5 ай бұрын
Not at this time, but possibly in the future.
@FreeformThoughts804
3 жыл бұрын
a lifesaver
@IceRhino44
2 жыл бұрын
Not a fan of the $120 price tag, but it seems well worth the money for the convenice. I'll be buying one soon
@Geno20916
Жыл бұрын
Too expensive. I bought one though 😅
@EngineeredAdapters
Жыл бұрын
We all ride here. We completely understand that each time we purchase an upgrade or accessory we need to justify the purchase price and often run through the same series of questions everyone else does. Is it necessary? Can I fabricate something on my own? Does it save me time? What is my time worth? Some creative people have fabricated their own solution but this is a superior solution in every way. From our standpoint, low-volume production is very expensive. Sometimes, we struggle just to find a manufacturer willing to help because they all want high-volume work. Fortunately, we have found some great local manufacturers who have worked with us, but that quality and workmanship comes at a premium! Just know, should you decided to move forward with your purchase, we offer great support!
@sirdroll
6 ай бұрын
Can anyone tell me their shipping experience with EA? I havent been able to reach anyone. No tracking number or other communication other than acceptance of payment through PayPal. Do they make these only after receiving an order?
@SouthernBoyzRyde
3 ай бұрын
I needed this a few years back oh well, good for folk’s that are looking to upgrade there headlight now
@magna94us
Жыл бұрын
Thanks! The video was perfect! Guided me step by step through the installation.
@EngineeredAdapters
Жыл бұрын
Great! So glad it was a big help and everything went well! Thank you for supporting small business!
@DerQuax
Ай бұрын
perfekt, thank you for this video 👍
@EngineeredAdapters
Ай бұрын
You are welcome, glad it helped!
@sirdroll
6 ай бұрын
Okay, Randy, I ordered the adapter, and will admit that EA has done good work with this modification to old school headlights. You made a valid point in your response to my comment regarding the price of the work your team accomplished. After searching MANY options to mount an LED headlight in my bike, yours is the most convenient; and your instructions on youtube are easy to follow. Well done EA. I stand corrected.
@EngineeredAdapters
6 ай бұрын
Be sure to let us know your experience once you get the light installed! Thank you for supporting a small, family-run business!
@sirdroll
5 ай бұрын
I can't tell you the brand of the headlight I bought. There was no logo or other ID'ing info on this relatively inexpensive, but effective l.e.d. bulb(s) or the pkg material. The fit was a bit tortured, but in the final analysis, worth doing. I had to use different (stainless) screws, but I had those on hand. The sizing of the nylon nut was a minor annoyance. This is a good upgrade for the not-so-well lighted roads of my beloved Florida.
@EngineeredAdapters
5 ай бұрын
@@sirdroll Thank you for the feedback and glad it worked well for you!
@jrmeza11
2 ай бұрын
What bike is shown in this video?
@darcyemberley7824
4 ай бұрын
Put one in my 06 vulcan 900 with rear led blinkers, the rears only flash once and the blinkers on the headlight go a glitchy. Any ideas?
@EngineeredAdapters
4 ай бұрын
That wouldn't be our headlight, we don't sell LED lights with the turn signals. However, you will discover that LED signal lights have very little electrical resistance which can cause hyperflash or other issues. The system reads the lack of resistance as a "blown bulb". Often a resistor module is required to make the signals work normally.
@blondie1484
4 ай бұрын
Does it fit to kawasaki vulcan en500c year 1996? im looking for replace the original with a led headlight. and i saw this video and i just need to ask. it woult be awsome if it fits for the older one models
@EngineeredAdapters
4 ай бұрын
Our research indicates that 500 uses a completely different setup. This will not fit, sorry.
@גביליפובצקי
Жыл бұрын
And I need shipping to Israel, thanks.
@EngineeredAdapters
Жыл бұрын
We ship internationally. When you checkout, shipping will be calculated based on your shipping address.
@robertadkins4466
2 ай бұрын
Wish I could afford it. Had to stop riding at night because I don't have enough light from the factory light. Just can't afford the change.
@AdEm32030
3 жыл бұрын
When will you have these in stock? I need one of these ASAP!!!
@EngineeredAdapters
3 жыл бұрын
It's best to sign up for our email notification so you can be notified as soon as we restock.
@loribeal8197
Жыл бұрын
I just installed this on my 2013 Vulcan 900 classic. Everything went together fairly easily as per the video. However, I found that the headlight that I purchased separately was loose in the adapter. I waited until it was all assemble and found it was still loose. So I put 3 small pieces of felt pads (that had to be trimmed to fit well) close to the notches in the bracket. That did the job. Now it is nice and snug. Thank you for a great product.
@EngineeredAdapters
Жыл бұрын
Lori, thank you for the feedback! Great little trick with the pads! We try to improve our products whenever possible and feedback like this is critical. We understand that some manufacturers have different specs so their lights may not be a direct fit w/o some modifications. Still, we try to make it as universal as possible and feedback like this helps!
@loribeal8197
Жыл бұрын
@@EngineeredAdapters the product is sound and easy to install. Cant thank you enough 😊
@TheNewenglandboys
Жыл бұрын
Where do I get this bracket?
@EngineeredAdapters
Жыл бұрын
@@TheNewenglandboys you can find that on our website! We have the link in the description box below the video but here is the link: engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@vulcanrider1267
2 жыл бұрын
I'm looking at doing something like this for my 2008 vulcan classic 1600. just wondering do you ship the bracket to Australia and do you also sell the led headlight for the kit. thank you
@EngineeredAdapters
2 жыл бұрын
We do ship to Australia. We also sell the light! We state on the website that we don't ship the light internationally. This is only b/c the shipping cost would be so high. But, if you are willing to cover that cost, we can ship.
@HarrellB_US
2 жыл бұрын
Just ordered this bi bought the angel light and had everything off and was thinking wait a min lol. Now if only I can find a way to wire the two little wires for the day time and blinking hookup
@EngineeredAdapters
Жыл бұрын
Those additional lights will require wiring outside the scope of this video, unfortunately. But anyone handy enough will be able to determine where to find the source for power for those lights. We may, in the future, create a video that demonstrates how do to that. The variations between bikes, however, makes it tough to create an "all inclusive" video for that. Thank you for your purchase and for supporting a family-owned, small business!
@bensoneill
3 жыл бұрын
hii, do you sell to Taiwan? (international)
@kronyq2_60
8 ай бұрын
Great product finally got mine installed! Just as a heads up on some Vulcan headlights the nylon nuts may be too big to fit initially so keep some sand paper nearby to adjust their size or just buy new ones your call! Also offset screwdrivers do wonders for the issue of the adjustment bracket.
@EngineeredAdapters
7 ай бұрын
We have noticed that the well for the nylon nut sometimes has overbend from the brake form. An alternative to sanding the nylon nut is to gently pry the rear tabs back to allow the nut to insert into the well.
@shakeswigglez3746
Жыл бұрын
$119 just for a simple adapter??. It is pretty silly that you can buy the actual headlight for much cheaper than the adapter which consists of a simple metal piece. This guy's are taking advantage of people.
@EngineeredAdapters
Жыл бұрын
You have to remember that the headlights in that price range are made in China and we, in America, can't even compete with that pricing. Since these fit a limited selection of models, we sell thousands of times fewer units than someone selling a 7" headlight. Short-run manufacturing is very costly in the States and we believe in Made in America. Maybe if the demand increases, we can justify tooling up to reduce manufacturing costs which would then drive the price down. In the meantime, we want to thank all of those who have purchased and helped support a small, family-run, American-made business.
@cheveyboy2009
Жыл бұрын
Don’t know why it has to be 120$
@EngineeredAdapters
Жыл бұрын
Thanks for commenting! This part is manufactured in the US using high-quality materials and processes. We understand that offshore manufacturing is considerably cheaper. We have been in manufacturing for over 35 years and refuse to have anything made overseas. We back up this product and take pride in the fact that this is made in the USA, supports US jobs and families - and we accept that this comes at a premium price. That also means that cost must be reflected in the retail price.
@cihan.kurucu
Ай бұрын
Samples? Light sample? Night vision sample????
@jakehelmly8781
Жыл бұрын
Would this bracket work for a 2007 Yamaha v star 650? I got my brother the headlight for his birthday but it has zero instructions. Great video
@EngineeredAdapters
Жыл бұрын
Looking at the images for the microfiche for that bike, it does not appear to be a compatible model. We are always looking to expand our products to fit additional models. The more cross-compatible a model is, the better the chances for a future bracket.
@ronniezane
2 жыл бұрын
This looks like the same setup for 2005 Suzuki Boulevard 1500 c90.... Do you think this adapter will work on my Boulevard?
@EngineeredAdapters
2 жыл бұрын
We had a few customers purchase these for their Suzuki's and advise us they were a perfect fit. This should fit the 2005-2009 C90!
@ronniezane
2 жыл бұрын
@@EngineeredAdapters Awesome! just purchased one last night!
@EngineeredAdapters
2 жыл бұрын
@@ronniezane how was the install and fit?
@jrmeza11
2 ай бұрын
@EngineeredAdapters, what bike is shown in this video?
@coopersilberling6883
2 жыл бұрын
For $119 I hope an LED headlight comes with the bracket…
@EngineeredAdapters
2 жыл бұрын
Maybe you should investigate the cost of low-volume and short-run production before judging if the cost is reasonable. These are made in America, using American workforce supporting American families. Admittedly, the chrome clamp ring is offshore-sourced but only b/c we haven't found a US-based manufacturer to produce it, but we are always looking. I would like to add that very few companies make products for these bikes. Would you like to know the reasons? 1) Capital. It costs a lot for r&d, it costs a lot to start-up an it costs a lot for the type of ongoing manufacturing previously mentioned. These aren't those popular American-made bikes where 10,000 units are sold each year. 2) Lack of support. The irony is that while most owners will complain they can't find enough aftermarket support, those same owners complain that the little support that is available is expensive. You simply don't get it both ways - you either have no aftermarket support or you pay the cost for those companies willing to step up and invest in tooling and manufacturing, those willing to accept the financial risk involved to manufacture parts that no other company is willing to do.
@abiprates5943
Жыл бұрын
do you have anything available for a 1988 Honda super magna? Thank you much.
@EngineeredAdapters
Жыл бұрын
We have not looked into a bracket for the Honda line. This is something that we will look into if the demand is high. We will likely start with the later models like we did with the Kawasaki and Suzuki lines. Thanks for your interest!
@brianseeton4443
2 жыл бұрын
anyone have the shortn sweet wiring diagrams for adding halo type head and passing lamps to a 03 vulcan 1600 classic
@EngineeredAdapters
Жыл бұрын
We may make a video in the future but with several models of bikes, we don't know how "generic" we can make a video for everyone. We will be looking into this for the future.
@G-Money1
3 жыл бұрын
It's finally here!!!
@CarlSwiger
5 ай бұрын
When will you have one for the Kawasaki Drifter VN1500 R? I believe the Meanstreak also uses the same bracket.
@EngineeredAdapters
5 ай бұрын
We occasionally get requests for the Meanie. After starting into the R&D, we reached out to the Meanstreak community to gage the amount of interest. To our surprise, there was almost none. Without a customer base, it doesn't make sense to invest the time and capital into the R&D, so we abandoned that project. Should the community show us there is enough interest, we would reconsider.
What is the part number on the adapter ring for 05 vulcan nomad 1600 so I can order one
@EngineeredAdapters
Жыл бұрын
The bracket in this video is the bracket you'll want to purchase. There are some 1600 Nomads this will fit and others it will not so be sure to check out the compatibility list on the website product page near the bottom. We have a brand new website we are working on that will make this selection process MUCH easier in the future! engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@heybruh3274
3 жыл бұрын
Completed mine yesterday on a Vulcan Classic. Just a note on my experience: Everything went quickly until securing the light adjustment bracket. It felt like I might strip out the screw or the housing because of the angle. Instead of creating an issue, I found it very easy to measure, and then simply back off the tension on the lamp adjustment screw. (5:00 in video) Went together much easier. Headlight aim was right on. Drove around last night and man - new LED (with Halo) is awesome!!
@EngineeredAdapters
Жыл бұрын
We considered using that method in the video. We used a set of mics to measure ours when we did it. However, we figured not everyone has something to make such precise measurements. Even with that, there's no guarantee that a new headlight will hold the same aimpoint but pre-measuring should at least get you back in the ballpark. This is why we highly suggest everyone check the aim after the installation. This is a great alternative method. Thanks for mentioning it!
@themuddywolf5794
2 жыл бұрын
Does this work on the early model vulcan 2000 with the big chrome headlight housing?
@EngineeredAdapters
2 жыл бұрын
It should fit the 2000 unless you have the "big nacelle". So long as it's the chrome bucket, you should be good.
@robertsaunderson6582
2 жыл бұрын
Does this product fit 2005 Vulcan meanstreak 1600B
@EngineeredAdapters
2 жыл бұрын
The Meanstreak has a bastardized light size. It's not 5-3/4" nor 7". Not sure why MaKaw made that decision but this means no other light bracket will be compatible unless you swap out the entire light bucket.
@MrDavid3371
2 жыл бұрын
How to I get hold of the engineered light bracket as I have the new lights but no bracket with it.
@EngineeredAdapters
2 жыл бұрын
You can purchase this on our website engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@1964danielito
9 ай бұрын
Where can I buy this adapter ?
@EngineeredAdapters
9 ай бұрын
This adapter is available on our website! engineeredadapters.com/product/vulcan-led-headlight-mounting-ring/
@umangu
Жыл бұрын
Why did Kawasaki make such a simple thing so complicated!?
@EngineeredAdapters
Жыл бұрын
It's really the aftermarket companies as they cater to the biggest market, which is Harley Davidson motorcycles. Most aftermarket LED lights are a direct-fit for HD or even Jeeps, but not metric bikes. Over the years, some crafty people have come up with DIY-remedies but none of them are great solutions. The Engineered Adapters' bracket turns this into a 20-minute installation! After aiming your new light, you are back to riding!
@justwatchingyoutube3285
2 жыл бұрын
Will this adapter work with any brand or type of 7" led conversion to the vulcan?
@EngineeredAdapters
2 жыл бұрын
Most LED lights are manufactured for direct-fit on Harleys. Our adapter fits those headlights to the Vulcan models. Therefore the brand is not critical, only that it fits the HD.
@josephbuckley3619
2 жыл бұрын
Do you have one for my 2001 Suzuki Intruder GS 1400?
@EngineeredAdapters
Жыл бұрын
We don't believe this will fit that bike. We are researching additional models of bike for compatibility or if we should pursue r&d to create one. The more cross-compatible the bracket, the better the odds of us taking a closer look.
@dalecarpenter8828
Жыл бұрын
Why is a $20.00 part $120.00 ! Rhetorical! Greed !
@EngineeredAdapters
Жыл бұрын
Thanks for commenting! This part is manufactured in the US using high-quality materials and processes. We understand that offshore manufacturing is considerably cheaper (but we doubt even they could produce is for $20!). We have been in manufacturing for over 35 years and refuse to have anything made overseas. We back up this product and take pride in the fact that this is made in the USA, supports US jobs and families - and we accept that this comes at a premium price. That also means that cost must be reflected in the retail price.
@I_am_archie
7 ай бұрын
You should engineer a bracket. Then sell it for the cost you want to purchase this one.
@slime5430
6 ай бұрын
R&D shouldn’t be free
@kriswilliams5161
Жыл бұрын
900 custom?
@EngineeredAdapters
Жыл бұрын
Kris, the 900 Custom uses a different size headlight. We have it on our list to do some r&d on that one.
@1964danielito
Ай бұрын
Put adaptar in EBay
@EngineeredAdapters
Ай бұрын
You can purchase on our website: engineeredadapters.com/product/vulcan-led-headlight-mounting-ring/
@jaimeramaya1036
2 жыл бұрын
Do this adapter works for a 2007 kawasaki mean streak, i need this ASAP, please let me know thanks
@EngineeredAdapters
2 жыл бұрын
This is not compatible with the Mean Streak. Sorry.
@EngineeredAdapters
2 жыл бұрын
We are starting r&d on this.
@WayneBurnettOutdoors
2 жыл бұрын
Ok I need this ..
@EngineeredAdapters
Жыл бұрын
Wayne, I believe you've purchased several items from us now. We hope you are happy with those purchases!
@josephbuckley3619
2 жыл бұрын
How do I get to the adapter for my 2001 Suzuki intruder gs 1400 model?
@EngineeredAdapters
Жыл бұрын
Unfortunately, this bracket is not compatible with that bike. We are doing R&D for additional models so it is possible we could have a compatible bracket in the future.
@josephbuckley3619
Жыл бұрын
@@EngineeredAdapters Thanks for getting back and please let e know when the project comes up.
@lvlodernDayCaesar
3 жыл бұрын
Will this work for a 98 Vulcan Classic 1500?
@EngineeredAdapters
3 жыл бұрын
It appears that bike uses a different bracket and headlight design and are not compatible.
@atifrazaqsidhu67
2 жыл бұрын
Will it work with 2009. VN. 1700 LT MODEL
@EngineeredAdapters
2 жыл бұрын
That should be a compatible model, yes.
@Cats32.5
Жыл бұрын
I found a led bulb for 19.95 on Amazon has blue halo on light looks good and lights the night 3screws and 15 min
@Outlawjustinjames
4 ай бұрын
I have a 2004 Suzuki vl800 and it said it fits and i hope it does!! My light doesnt have a stock bracket like that inside!
@jrmeza11
2 ай бұрын
Did you get it?
@Outlawjustinjames
2 ай бұрын
@@jrmeza11 yeah and it's wrong lol. It does not fit a 2004 vl800
@jrmeza11
2 ай бұрын
Same problem lol, did you find a solution? I’ve seen that we can also buy a headlight and headlight ring for the 2005 volusia k5 and put the bracket on it
@Outlawjustinjames
2 ай бұрын
@@jrmeza11 what I did was I still used the bracket they sent me but what I did was, I JB welded the contact points of the adapter to the bezel lol. It works but that bitch will probably never come off the bezel lol
@jrmeza11
2 ай бұрын
Can you send me pics or a video of how you did it? I also purchased one and I need to put it on somehow lol
@killervampir
2 жыл бұрын
Does it work for the 2002 mean streak 1500c
@EngineeredAdapters
2 жыл бұрын
These are incompatible with the Mean Streak models, 1500 or 1600.
@Ebjones10161980
3 жыл бұрын
Could you make one for a 1996 Vulcan 1500 Classic? I need one bad
@EngineeredAdapters
3 жыл бұрын
This one is not compatible but we are already looking into adding different brackets to fit additional years and models
@twotallguysadv
2 жыл бұрын
@@EngineeredAdapters how's that going? I need one for my 98 1500 classic as well
@2008dougefresh
Жыл бұрын
@@EngineeredAdapters any updates on the 1500E classic?
@philipodeny1129
3 жыл бұрын
Definitely didn't take 30 minutes, more like 2hours! Adapter works perfect though and build quality looks solid.
@1964danielito
Ай бұрын
Adapter
@sirdroll
7 ай бұрын
You guys did a nice job of creating this adapter, but the headlight I purchased with all of the amazing LED tech inside, including shipping was a mere $52. The bracket you're offering is $119! I'm keeping my old headlight. But, again, nice job of coming up with a convenient way of mounting these LED lights.
@EngineeredAdapters
7 ай бұрын
Thank you for the feedback, but that's an apples to oranges comparison. That LED light, with all of the "tech", was manufactured in China, with chinese parts, supporting Chinese jobs - and at high volume. Our products are low-volume, manufactured in America supporting American jobs. Our pricing reflects the high-cost of low-volume manufacturing.
@Brams-wu1xw
2 жыл бұрын
this product looks awesome, hopefully, they will be back on stock soon. 😀
@Brams-wu1xw
2 жыл бұрын
Just bought an adapter and an LED headlight, cant wait to get hold of them and mount them onto my VN900.
@Brams-wu1xw
2 жыл бұрын
Received and mounted on my Vulcan Classic 900LT, took the best part of 30min. A special thanks goes to Randy for his assistance in posting the ring to the right address. TOP BUY!!!!
@EngineeredAdapters
Жыл бұрын
Fantastic! Thank you for that buy and for supporting an family-owned, small business that manufactures right here in America! Feel free to post a review on our product page as well! engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@ADCOnline
Жыл бұрын
se pudese conseguir en mexico ???
@EngineeredAdapters
Жыл бұрын
Nosotros enviamos a Mexico
@ADCOnline
Жыл бұрын
@@EngineeredAdapters en cuanto sale ya con envío al CP 66050? Si pudiese cotizarme
@EngineeredAdapters
Жыл бұрын
@@ADCOnline Si va a la página de pago, debe completar un costo de envío. Sin embargo, no siempre es correcto y podemos contactarlo para ajustarlo, si es necesario. Email: EngineeredAdapters@gmail.com
@italicus100
Жыл бұрын
where can i buy this kit?
@EngineeredAdapters
Жыл бұрын
Luigi, you can purchase this bracket on our website! Thanks! engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@uomo3047
Жыл бұрын
I definitely do not recommend the day maker lights, the lighting is good on the sides but very poor in depth. A csp LED spotlight is much better.
@HarrellB_US
2 жыл бұрын
Okay but there is a huge designer flaw there is a substantial gap between the housing and the new headlamp itself causing the headlight to shake profusely and making a loud sound. What have you come up for a solution to this I was thinking of weatherproofing it just like you would your door but shouldn't have to do that if this is a housing to fit the Vulcan headlamp housing.
@EngineeredAdapters
Жыл бұрын
Brandon, please reach out to us with photos and video. EngineeredAdapters@gmail.com
@HarrellB_US
Жыл бұрын
@@EngineeredAdapters I will mostly definitely get you that. I'm in California working and will do this on my week off when I get home next week.
@RuthlessGamingTM
Жыл бұрын
the website isnt working anyone found another variation?
@EngineeredAdapters
Жыл бұрын
Our website is working. We are undergoing a major website update so it's possible you tried to access it during an update. My apologies. Can you please try again and, if unsuccessful, please place the link in your reply?
@cooperroyall7356
2 жыл бұрын
2014 vulcan 900 custom?
@EngineeredAdapters
2 жыл бұрын
Does not fit the Custom.
@roberttrommer1232
2 жыл бұрын
I have a 2002 1500 Vulcan classic and i do not know if this adaptor will work for mine. It looks the same like your video
@EngineeredAdapters
Жыл бұрын
It depends on the suffix model letter. For example, this will fit a 1500N and 1500V of that year. It does not, however, fit the 1500E and 1500T. There are many different brackets used and some look very similar. If you know your model number you can order accordingly. If you still aren't sure, you can submit some photos of the bracket to EngineeredAdapters@gmail.com and we can review and advise if it will fit!
@mikefay2145
3 жыл бұрын
Good Job Randy!
@EngineeredAdapters
Жыл бұрын
Thanks, Mike, and thanks for always supporting us!
@brianparson6688
2 жыл бұрын
Need to know if this will fit my 1997 Vulcan 800 classic. I can't seem to find anywhere on your site that offers me to check that.
@EngineeredAdapters
2 жыл бұрын
The website does list compatible models. Sorry to say, this is not compatible with the 800's.
@josiahlawton
2 жыл бұрын
What brand LED light is it. I want to make sure that the adjustment bracket it has the screw holes. I’m noticing some LED kits with no holes on the back at all.
@EngineeredAdapters
2 жыл бұрын
The LED light doesn't need holes in the back. All holes and screws are mounted to our bracket or the bracket from your bike. If this doesn't make sense please email as a screen capture of the area in question. EngineeredAdapters@gmail.com
@Anhnoles
3 жыл бұрын
ah bummer not 900 custom compatible
@EngineeredAdapters
3 жыл бұрын
The 900 Custom uses a 5-3/4" light. Some custom owners have converted to a 7" light which would work if it was a light from one of the compatible bikes.
I have a 2005 Kawasaki Vulcan vn2000 the one with big kind of oval ...any hardware to install a led headlight?
@EngineeredAdapters
3 жыл бұрын
Unfortunately, there isn't much for the oval light Kaws
@tonyalb3863
Жыл бұрын
will this fit 2009 vulcan classic thnx
@EngineeredAdapters
Жыл бұрын
Absolutely! And you've already seen how easy the installation is. You can find that on our website here: engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@laamkingent1
3 жыл бұрын
I have a 2012 Vulcan Nomad 1700 will this work for my bike?
@EngineeredAdapters
3 жыл бұрын
It will. engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@laamkingent1
3 жыл бұрын
@@EngineeredAdapters Thanks maybe you might know... the LED light came with a 3 prong Male connector and 1 female red wire connector Do I need to do anything with that wire or just leave it alone.
@EngineeredAdapters
3 жыл бұрын
@@laamkingent1 there are many different styles of LED lights. However, if there are more wires outside of the 3-pin connector (which will directly plug in as shown in the video) the extra wire(s) are likely for a halo light or DRL or some other additional feature in the light your purchased. In the video you can see there are additional wires on this headlight that I did not connect. However, if I wanted those side lights to illuminate or act as DRL or turn signals, I would need to wire them up accordingly but that is outside the scope of this video.
@laamkingent1
3 жыл бұрын
@@EngineeredAdapters Ok thanks I'll leave it for now I thought it might needed to keep the Headlight on when the bike turns on. I have passing lights setup already. Thanks for the prompt response I will be getting the bracket soon.
@laamkingent1
3 жыл бұрын
Hi I just mounted the headlight the instructions was on point. I have the same light you have in the video when I mounted it I noticed that there is space around the headlight in which water can get through. Do you have any suggestions on what I can put around it to not allow that to happen?
@jae1179
2 жыл бұрын
Do you use a 7" led assembly?
@EngineeredAdapters
2 жыл бұрын
This is the only bracket you need. You will need an LED headlight which we also now sell on the website!
@robertmendez2789
Жыл бұрын
Fantastic Video !!!!
@EngineeredAdapters
Жыл бұрын
Thank you, Robert! Please consider subscribing as each one will help the channel algorithms - plus, we have more content planned for the very near future!
@zanraz
2 жыл бұрын
Is there a kit for the Vulcan 500?
@EngineeredAdapters
2 жыл бұрын
We do not have a kit for the 500cc models
@SanjeevKumar-lj9bw
3 жыл бұрын
Hi, where can i buy this bracket for my 2011 Vulcan 900? Thanks
What’s different about the 1500E that makes I’m not applicable?
@EngineeredAdapters
2 жыл бұрын
Our research shows the bracket is different.
@2008dougefresh
Жыл бұрын
Did you find a solution for your 1500E? I am having zero luck
@brandoncollins2804
3 жыл бұрын
Anyone put this on a custum ?
@EngineeredAdapters
3 жыл бұрын
Sorry but the bracket does not fit the Custom. engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@NJNino82
3 жыл бұрын
Could you happen to make one for a Vulcan 800?
@EngineeredAdapters
2 жыл бұрын
We are doing r&d!
@NewTypeZero0
Жыл бұрын
@@EngineeredAdapters I am assuming there hasn't been an update as there is nothing in your shop.
@joshuahernandez9682
3 жыл бұрын
I have an 08 EN500 vulcan will this work ?
@EngineeredAdapters
3 жыл бұрын
I believe most bikes below 900cc use a 5-3/4" light so this is not compatible
@zanraz
2 жыл бұрын
Is there a different kit that works for the 2008 Vulcan 500?
@jesusangelmolinagonzalez5420
2 жыл бұрын
Falto ver la luz encendida, para ver que tipo de luz da y potencia...?
@EngineeredAdapters
Жыл бұрын
We plan to add this to any future light videos. I agree, it would help to see a comparison. But we can tell you that it blows away the factory lighting!
@LLKLL
2 жыл бұрын
Will it fit the vulcan 800 from 99'?
@EngineeredAdapters
2 жыл бұрын
It will not. Nothing below 900cc in the Kawasaki lineup
@RichardBrown-ji1pd
2 жыл бұрын
What is the part number on the adapter ring
@EngineeredAdapters
2 жыл бұрын
Do you mean our part number? KVUL-LED0-1 engineeredadapters.com/product/vulcan-led-headlight-mounting-ring
@brightonfontaine7448
3 жыл бұрын
After all that work the adapter didn't take my nylon nuts. Extremely disappointed. Even if it did fit, the opening for the screws to go through is too small on the back side so the screw wouldn't go in all the way anyway. It's as if someone made this bracket and didn't even see if everything would fit properly. How do you run a business with selling unacceptable product to costumers? Pathetic
@EngineeredAdapters
3 жыл бұрын
Did you reach out to us about this issue? We looked and did not see any emails from you reporting this issue to us. Maybe it was just easier to come here and comment instead? We back up our products and we could have simply advised you that it's likely that the tabs may have been slightly overbent in manufacturing, creating too small of a pocket for the nylon nut. The fact that you mentioned the screw not fitting indicates to me this is exactly what happened. The solution is as easy to placing a screwdriver into the nut well and slightly prying the bend open. This would provide both a larger slot for the nylon nut and open up the slot for the screw clearance. Customer feedback is important for most any company to address issues, in this case quality-control, and to make further improvements to products. Engineered Adapters relies on this and takes this seriously. When it's just one person, we consider it an isolated incident. When several people mention this, we take a closer look. Several customers have mentioned how tight the nut well is when trying to fit in the nylon nut but no one has stated it was impossible. It has, however, caused us to take a look at our dimensional data to determine if a change is required. No quality control department checks every item so it's possible some issues may arise at the customer level but we handle each of these case-by-case.
Пікірлер: 238