Great video, but you shouldn't solder your connections. Use connectors, you can just pull them off for easier removal.
@atf8501
3 жыл бұрын
yes!!
@reviewmasters615
Жыл бұрын
So what if the battery dies
@Team_Fortress2
4 жыл бұрын
Attach the negative from the batterie to the frame of the bike and attach the negative on the light to the frame. Your bike is made of metal so its going to work as a ground.
@mcnuggatron2129
4 жыл бұрын
Great video! Always had an appreciation for the smaller KZitemrs, especially when you produce videos which get the point across as well as anything
@floridamansgarage8629
5 жыл бұрын
Thanks for watching and remember red goes to red and black goes to black!!
@JayeStyp
4 жыл бұрын
He's probably looking for a more permanent solution
@joey_esc0818
4 жыл бұрын
Jose’s Garage what do you do if you don’t have a solder
@floridamansgarage8629
4 жыл бұрын
VIVID merky_yt just wrap the wire around the terminals
@Coopthedj
3 жыл бұрын
Can you send me the link to the light
@DAVID-xe9yh
3 жыл бұрын
The soldering iron can be used to shrink your shrink wraps. Just heat it up and rub it along the outside. You won't have to use the torch. Cool video.
@Blue-rh2mb
2 жыл бұрын
Nah this guy is a life saver bro
@JorgeRodriguez-ei2gi
2 жыл бұрын
Great explanation ,young men,,continúe,if You could make a vídeo to puts light on a chinese ,4 stroke mini bikes ,thanks Say hello Joe & Bros,suscribes.happy new year 12/27/2021
@lawrenceorum6030
4 жыл бұрын
What kind of charger your useing!!!
@bigpimpen045
4 жыл бұрын
Or you could just buy the camo one from tractor supply that has a headlight it's not too bad. I might put a switch on mine so when it's running I can turn it on and off
@solosoldier4569
3 жыл бұрын
Can you add that headlight to a tillotson hemi motor?
@bigpimpen045
3 жыл бұрын
@@solosoldier4569 I'm not sure, I'd imagine there has to be somewhere on it you can. You could always email them or call their customer service and find out.
@larryguevara3350
2 жыл бұрын
If you add a regulator rectifier to the bikes with head lights you can then put a dc led light bar with out a battery.
@jayranger9605
5 жыл бұрын
Well done ! Basic and to the point !
@paolomanu9031
10 ай бұрын
How are you going to change the battery?
@jaime4jc
2 жыл бұрын
Great video and easy to do, question I have 2 led spot lights will this battery good enough or do I need a bigger one??
@floridamansgarage8629
2 жыл бұрын
Any 12 volt motorcycle battery will do
@JNC1973
Жыл бұрын
I see what you mean that it is easy to have the wires soldered to the battery but if I did that I wouldn't be able to connect the Battery Charger to the battery when it is getting low on juice. I have a 12 Volt Battery but between the Headlight, Tail Light, Orange Side Markers Lights, Digital GPS Speedometer, and Volt Meter all wired to the one 12 Volt Battery it tends to drain sooner than later ya know what I mean. I got everything hooked up to a 3 Button switch so I don't have to have everything running at the same time. I don't use the lights until sundown but I always like to use my Speedometer. But how do you charge your Battery with the wires soldered on and the shrink wrap covering the whole terminals ?
@dbpiercy1
Жыл бұрын
good job looks great
@Allyoucaneatmeat
Жыл бұрын
Ok what about recharging the battery?
@alvinrodriguez7159
3 жыл бұрын
Great job, doing this to my bike.
@vincenthurtado9670
Жыл бұрын
Excellent Video. Few tweaks you could have done but straight forward and to the point. Looking forward to seeing what your going to build next. Keep up the great content.
@teamvlad365
4 жыл бұрын
Great video man, this really helped me out. I dropped you a sub and a like👍
@LosAngeles_323
Жыл бұрын
Do you know what kind of metal switch that is? I see so many but I’m not sure why some are different “V” Does it really matter the voltage?
@peniaji_yt5762
2 жыл бұрын
Im thinking about putting it on my mini bike. Could you show step by step so I can do it the right way so I do not screw up.
@mauricioreygadas6200
2 жыл бұрын
You hit 20k views!!!
@Coopthedj
3 жыл бұрын
What’s the link for the led light
@bigfoot2708
3 жыл бұрын
Yea boy. Tnx brother. 👍👍
@daily_wide_wawa_cat9859
5 жыл бұрын
I needed this :D
@davidwatlington9702
5 жыл бұрын
Do you use a trickle charger to keep your battery charged?
@phgraves01
4 жыл бұрын
Kind of hard when he covered the connections with shrink wrap
@floridamansgarage8629
4 жыл бұрын
I just slip the gator clips under
@bonnietrout8872
Жыл бұрын
Can you do a video on blinkers
@nyzuarivera4925
4 жыл бұрын
Thanks for Your help bro you got a instagram?
@floridamansgarage8629
4 жыл бұрын
@josereygadas personal @trucksngunsdaily meme
@lilmockme8821
2 жыл бұрын
solder? The "L" is silent, just saying... good video
@1lowextended17
3 жыл бұрын
Where can I get that frame piece in the back where your basket is mounted on
@floridamansgarage8629
3 жыл бұрын
Online it’s called the rear rack
@alexmagdaleno7209
4 жыл бұрын
where did u get the exhaust at?
@floridamansgarage8629
4 жыл бұрын
AL3X 2281 amazon
@gboyz718
2 жыл бұрын
Can you drop the link for the light
@techhead976
4 жыл бұрын
Link for the light? Thanks guys
@juanmolina8697
2 жыл бұрын
how do you charge the battery if the lights kills it?
@floridamansgarage8629
2 жыл бұрын
I would just slip the clamp under the shrink wrap. Could have done it better but it works
@rumurz.
3 жыл бұрын
what gauge wires
@girafedigital
Жыл бұрын
Anyone know how to get the battery wired up so it can be charged from the bike? Or is this not possible?
@nepaoutdoors8536
2 жыл бұрын
solder is pronounced like saw-der just so you know.
@timc7798
4 жыл бұрын
do you have a link to the light you used?
@floridamansgarage8629
4 жыл бұрын
amazon
@xxtryhardxx1620
4 жыл бұрын
Can u put on on my go kart
@up9709
4 жыл бұрын
How do you charge the batteries
@floridamansgarage8629
4 жыл бұрын
jewels - just slip the alligator clips under the rubber sleeve
@Jay-zk7xk
2 жыл бұрын
How does the battery stay charged ?
@floridamansgarage8629
2 жыл бұрын
Just slip the clamps under the shrink wrap
@girafedigital
Жыл бұрын
I have the same question
@cuh_2023
Жыл бұрын
You can buy a charging coil for those engines
@gonewronggarage4565
5 жыл бұрын
What do you do to charge the battery
@floridamansgarage8629
4 жыл бұрын
gone wrong garage I just slip the alligator clip to the bottom of the connector
@scottvan1898
4 жыл бұрын
What you mean by clips at the bottom, ? How you get electric source to the battery that’s what’s. Gone wrong want to know.
@phgraves01
4 жыл бұрын
@@scottvan1898 Not easily when it is shrink wrapped.
@mikefarmer2121
3 жыл бұрын
Gr8 Vid! If you're 8yrs old!!! Really , Proof that YT is for inner city dorks.... Trickle charger????
Пікірлер: 69