Congratulations goes to Ruben C. from Spain for winning the Raspberry Pi 4 starter Kit Giveaway: www.crosslink.io/free/
@shaark_1396
3 жыл бұрын
I keep getting an error saying offline error no more candidates to feast and no working port/nauseate combination detected when I press connect
@zeke7515
3 жыл бұрын
First impressions are everything. This video opened up with you no pre-roll, no sponsor message, just "this is what we're doing". I like that. New sub.
@DR-br5gb
3 жыл бұрын
I agree. He's ahead of the curve on this and I love it also.
@johnjahner3389
2 жыл бұрын
I've been trying to setup my Raspberry Pi for days and you were the only site that described and guided me through the process correctly. Most time programs change and the videos are not up to date. Good job of keeping it simple and not overdoing it to impress everyone how smart you are. Thank You
@USUCKATPVP
3 жыл бұрын
Got my pie kit today .....printer comes tomorrow. It's all set up waiting for the pi cam and printer to both come tomorrow. Needed octoprint to make changing out my extruder to make sure I get the new steps right....and the ease of not having to keep xfering that flash drive was enough of a reason to pull the trigger....bonus for viewing/adjusting on the fly from anywhere and the time lapse videos are....mesmerizing af.
@Despiser25
2 жыл бұрын
Couple things. If you hit ctrl-shift-X during the Pi install you can set your WiFi SSH etc without having to edit a text file. Instead of Etcher you can instead use the Pi Imager to get the Octopi distribution directly without any third party software installs.
@richardbruckner8913
4 жыл бұрын
Best Octopi setup video out there. Rather than saying what to do you show what needs to be done!
@remcovreeswijk7064
3 жыл бұрын
This tutorial is great! I am waiting for my Ender 3 v2 and wil absolutely give this a try with my Raspberri Pi!
@andremuensti4730
4 жыл бұрын
Cura have a Plugin for Octoprint, so you can transfer quick and easy the gcode.
@mmm2096
4 жыл бұрын
Your videos are so relevant for me, getting my pi in a couple days
@wackychimp
2 жыл бұрын
*NOTE* : For users of Pi 3B+ you also have to uncomment your country in the config file for your wifi setup. I spent about half an hour trying to figure out what was wrong - so hopefully it saves you time.
@EsotericArctos
3 жыл бұрын
Samsung have a High Endurance SD Card now that should be ideal for OctoPi. It is branded Samsung Pro Endurance, rated to last over 17,000 hours. About the same price as SANDisk cards in Australia and are Class 10. The other critical thing with Raspberry Pi is to have a good power supply. I really would recommend buying the genuine Raspberry Pi power supply or similar, especially if you add a screen to your Pi (like using Octoscreen) Poor quality PSU causes lots of undervoltage issues. Thanks for the great video :)
@jerrylager4834
Жыл бұрын
Thanks for the video. The bit about going in and changing network settings fixed the issue I was struggling with.
@WifredJacquetYeste
4 жыл бұрын
Good video Daniel!! Today I have just set my OctoPrint server upon Raspberry Pi 4. Following your video, it has been very kind.
@Crosslink3D
4 жыл бұрын
Thanks! Good to see it works for you!
@sergeantarmy
4 жыл бұрын
I had tried setting up my pi a few weeks ago with no success, I tried again following this video and still could not get my computer to recognize my wifi pi. I connected directly to the modem and everything is now working fine! Thanks for the great video!
@stephenboyd4831
4 жыл бұрын
Thanks mate. Have watched it twice so now to jump in the deep end 👍
@Crosslink3D
4 жыл бұрын
Hope you enjoyed it!
@drconflict629
3 жыл бұрын
Everything worked first try, thanks man!
@Crosslink3D
3 жыл бұрын
Great to hear that!
@pipponia1234
4 жыл бұрын
Thanks for the very good video. I followed your instructions and now I have it up and running. Thanks
@Crosslink3D
4 жыл бұрын
Glad it helped
@thecorrnershed
2 жыл бұрын
I know this is an older video, but I'm brand new to 3d printing and considering this option. Thank you for a well done, very instructive video. I've subscribed and will be watching more.
@TheNathanchavez96
3 жыл бұрын
I made a dumb mistake, make sure your cable is a data cable.
@travismillward1978
3 жыл бұрын
Is it possible it is only a "charging" cable?
@travismillward1978
3 жыл бұрын
Looks like that was my problem too! Yes it's working with my Voxelab Aquila!
@summervillesean
4 жыл бұрын
Hey, I wanted to mention a small inaccuracy on how you describe the connectivity check at around 7:15. Octoprint by default will check for updates regularly. Enabling the connectivity check forces Octoprint to check for an internet connection first and only check for updates if it's connected to the internet. If the Raspberry Pi is always going to be connected to the internet, then you can leave it disabled. If it's not, then it's better to enable it to avoid checking for updates when it's not connected to the internet. Enabling it while having a constant internet connection won't hurt anything, but it should be enabled if it won't to avoid it using up resources checking for updates and failing. Otherwise, I think the video is great, especially for users that are new to the Raspberry Pi.
@wild4drones724
4 жыл бұрын
yeah simple: sudo shutdown -h now
@mistahpro6904
4 жыл бұрын
Very detailed walk-through. Thank you!
@Crosslink3D
4 жыл бұрын
Great to hear it was helpful!
@amparodiaz8060
3 жыл бұрын
Hi! How are you? I love your channel, I have 2 questions: 1- what happen it my internet goes down while I’m printing? 2- can I plug more than one 3d printer in a raspberry pi? Thanks!!!!
@Crosslink3D
3 жыл бұрын
Hey, great questions! 1.) your Internet Connection is not needed during printing, so it doesn’t matter if it gets interrupted. 2.) This is possible in theory but requires a modified setup of multiple Octoprint instances on the raspberry pi.
@MaxGoddur
4 жыл бұрын
Had to post this comment the middle of the video why? because you are doing something that should be done by all creators of videos and that is "Zooming-in" when showing something the viewer can not see while sitting in front of their computer. And if you are on a laptop even more so. Thank you
@7invi
4 жыл бұрын
how to install Octoprint - video start in 3:40
@shortshorts2121
3 жыл бұрын
you dont hvae to use echer, the raspberry pi foundation released a replacement for that, I have been using it a bunch and it helps me a bunch.
@Crosslink3D
3 жыл бұрын
That's right, that was released a while after this video was made. Thanks for the hint!
@clarestevens2
2 жыл бұрын
btw PLA Is NOT BIODEGRABABLE unless very specific and rare conditions are met
@terrylegrand1950
2 жыл бұрын
This is a very Informative however on what screen are you seeing the OctoPi GUI I don't have a computer hooked up to my 3D Printer where should I connect this Ras Pi up to in order to get the GUI
@greggbowers1947
2 жыл бұрын
THANK YOU!!! This has been grossly helpful in setting up!
@sam1else
3 жыл бұрын
Quick question, could I multi purpose my raspberry pi. For example if I used different microsds (one to be for octoprint and another for being a mini pc).
@Crosslink3D
3 жыл бұрын
Sure, you could do that and with the Pi 4 you can also boot from SSD
@syntaxcuemi3d53
4 жыл бұрын
Another great video with detailed explanation 👍 another way to load a gcode file to octopi, is to drag and drop the file from the computer, to the left hand side of the octopi screen. This will then upload the gcode file to the current folder directory that your in, on the octopi.
@Crosslink3D
4 жыл бұрын
Great Tip!
@jimhinkle7245
3 жыл бұрын
Thank you for your help and your videos Daniel!!! I've learned/learning A LOT!!!!
@vlynn2973
3 жыл бұрын
i love space balls, that movie was awesome
@MaxGoddur
4 жыл бұрын
Having problems setting up the cam and lapse settings do you have one specifically for that purpose and are the setups steps the same for both the pi and windows 10?
@rpd3dprints675
3 жыл бұрын
Nicely explained alot thank you for the 1st time we setup our Octopi
@TAKTEZ
2 жыл бұрын
Thanks for the video! Been wanting to do this for ages and this was a very easy to follow tutorial. It worked first try! :D
@i3badi
3 жыл бұрын
Need help when i level my printer the x setting not saved in the printer or in the octopi system after i Shut down the two devices My printer ender 3 v2 with auto leveling Connected with raspberry pi 4 / octopi lass update for both First time yesterday i am using raspberry with total loss two beds 😅
@shoebert31
3 жыл бұрын
just so im clear,I can run the whole process from my pc wireless through a pi? For example I use cura on my pc, then upload that to octoprint which is on my pi.
@Crosslink3D
3 жыл бұрын
Yes, that’s exactly what it does!
@shoebert31
3 жыл бұрын
Exact.Could you also run it directly from the pi?
@christopherpacheco7807
3 жыл бұрын
Is there a way for me to block the pi from powering the mainboard? Im setting up a relay to power on the printer from the pi and all is good so far. My issue is that darn undervoltage to the printer when it is not turned on. I want to leave the pi running all the time and only turn on/off the printer when needed. Thanks for the tutorial btw great vid.
@fishtankguy
4 жыл бұрын
Great video. Would be nice to show how to change camera parameters, mine always does default size.
@bubba2j2
3 жыл бұрын
im having trouble. i have done everything up to where you turn the printer on and plug in the raspberry pi and then nothing happens what should i do next??
@AbdurrahmanAllahem
4 жыл бұрын
Extremely helpful. It worked from first shot.. Thank you,
@meingalaxy2385
2 жыл бұрын
Nice video and easy to understand information. Thank you very much. I am very new and would like to ask the community whether I can use octoprint also with the Ender 7?
@LuisCederborgDesign
3 жыл бұрын
Great video and very informative! I am considering getting a raspberry Pi and octoprint, but I was wondering If my printer has auto-leveling is it possible to do it from the octoprint app?
@stevenstirling78
4 жыл бұрын
Does anyone know if any upgrades to the motherboard or firmware level is required for this? I'm running stock Ender 3 with firmware 1.1.6.2 - Thanks!
@efexzium
3 жыл бұрын
Micro SD XC cards aren’t compatible ones with 128gb ?
@andrewmcgee5127
11 ай бұрын
Hi just getting into printing with octopi and was there a way to get it to boot from a hard drive like you can with raspbery pi desktop thanks
@farainyoni4919
4 жыл бұрын
Great video. I'm new to this and setting up my 1st Ender 3 Pro. Cant wait to get this printing.
@mauricejohns3635
2 жыл бұрын
Okay, Its 2022 where can I find somebody setting up Octoprnt using windows? Every version I see they're using a Mac computer my windows is using 64 not 32 does that make a difference all the versions I've seen so far are talking about using a Mac.
@jfedele35
4 жыл бұрын
Thanks for this video. I am on a mac and cant get octopi local to work for me. I tried hard wiring into my router, and it works perfectly, just doesnt want to connect wirelessly. In your video you mention if octopi local doesnt work, you might have to enter in the IP address, however I cant find anywhere that I would put the address. Ive search the internet for answers and cant find a solution, would you be able to tell me where I would enter my IP so i can find my router? Thanks!
@airot1987
3 жыл бұрын
i cant get the image to copy to my SD card. it keeps failing. i dont understand what the problem is. im downloading the latest octoprint and etcher...using brand new SD cards...fails every time...just my luck...smh
@blairhickman3614
4 жыл бұрын
Is there a setup video for a webcam for Octopi/Octoprint? also the time-lapse feature you mentioned in this video? Is there a preferred webcam? Looking at the raspberry pi cam, arducam, and HXSJ S70 HD Webcam.
@fatalkonfliktgaming2511
3 жыл бұрын
I am following along with the video and once i get to flashing octopi on the raspberry i get failed to flash. Additionally you mention getting the IP briefly from your router. Unclear about this part.
@Crosslink3D
3 жыл бұрын
You mean, when you run the flashing software to copy the files to the sd-card? If that fails, it's mostly a broken SD-Card. Also you should try to use the official imager tool from www.raspberrypi.org/software/ to copy the image to the sd. About the IP Address. If you're not sure, connect the Raspi to a monitor and keyboard and login. Then type "ifconfig" and you will see the IP address listed.
@bkkorner
2 жыл бұрын
I just got the Raspberry Pi 400 Desktop. How do I put Octoprint on it?
@1204ROY
4 жыл бұрын
when setting up wifi you didn't mention change country if not in UK
@marcoaguilar42
3 жыл бұрын
does the pi camera work or does it have to be connected by usb?
@bkkorner
2 жыл бұрын
Can someone help me install Octoprint on my new Raspberry Pi 400 desktop kit? It's so confusing...I really want to use it with my 3d printers,which is why I bought it to begin with.
@josephmoon3461
3 жыл бұрын
Very concise and informative.
@Crosslink3D
3 жыл бұрын
Glad you think so!
@garytoth8152
4 жыл бұрын
Great vid, very in depth instructions
@Crosslink3D
4 жыл бұрын
Glad it was helpful!
@kenh8979
2 жыл бұрын
Thanks for the great video
@guilhermesousa3299
4 жыл бұрын
Cadê o vídeo novo? Eu quero aprender mais, posta logo Man! you are awesome, I got stuck with my prints and then I found your channel and Bah! Now my Anet A8 (which is an Anet Evolution) is printing in my lab and I'm safe at home, thank you! Greetings from Brazil
@Crosslink3D
4 жыл бұрын
Awesome!
@VeneerSlinger
2 жыл бұрын
So if my raspberry isn't showing up with the octopi.local. Do I input the ip address of the hotspot I'm using?
@mrmathman
4 жыл бұрын
I hear the guy who created this is pretty awesome
@basherbanks
3 жыл бұрын
Octoprint and Anet a8 running marlin 1.1.9, will it work well? Hi Daniel - firstly thanks for your great channel. I want to add a BLtouch to my set up but they means sacrificing my SD card to make it fit on the board. This is where I started thinking of also adding Octoprint, but there are a lot of reports about slower poorer quality prints via Octoprint - what's your advise please. Thanks Andy😃
@edwardknight3695
2 жыл бұрын
what is the code reading and write app your useing
@mattpen7966
4 жыл бұрын
nice video! everything i needed and it seems simpler then i anticipated, thanks!
@kahlershoej4538
3 жыл бұрын
Hello i'am from denmark. Can I have 2 Ender_3_Pro on 1 Raspberry Pi?? Nice video you make
@rong2578
4 жыл бұрын
Any chance you could show how to hook 2 printers to 1 Raspberry Pi? Thanks
@MikeGaudencio
4 жыл бұрын
Hi, has anyone got the bed visualization to work correctly with the mesh bed leveling feature of Marlin 2.x firmware? I have the bed leveled but I cannot see it in the Octopi plugin? TIA. Love the channel!
@tomaskaizeler
3 жыл бұрын
What program does he use to access the boot drive? I can't for the love of God open it and edit the file
@ProtoPropski
3 жыл бұрын
He opens it like you would any drive on WIndows. through the Windows Explorer which is built in and you should already always use to browse files. if your on a MAC I recommend looking up DR VAX he has an extensive tutorial on setting it up via MAC
@jeffborghoff3286
3 жыл бұрын
Will this solution work with my out of the box Ender 3 pro and factory motherboard and firmware? My Ender 3 Pro has a 1.1.4 motherboard and firmware 1.1.6.2
@miguelmarin5053
4 жыл бұрын
Thank you for the great help! It worked!
@Tyler-qz9uc
4 жыл бұрын
Great video! I love your tutorials!
@Caterhamse7en
4 жыл бұрын
Digging the tutorials. How well does Octopi play with Th3d’s EZabl?
@igeekw2u
3 жыл бұрын
Thanks for the awesome video Daniel. really helpful
@Crosslink3D
3 жыл бұрын
Glad it was helpful!
@ygalion
3 жыл бұрын
Anyone? Following instructions, but if enter network octopi does not boot and try rebooting each time when fail, if comment network data, it launches successfully but of course with no internet (tested with monitor conencted to raspberry)
@MasterTuttoo
3 жыл бұрын
Can u use ocotprint on a PI 2
@Doitright30X
4 жыл бұрын
I got none of this..... I'm so confused and don't know how you got to that local screen and on what device..... I get a screen full of code.....
@--3D
4 жыл бұрын
wow it´ll be really nice to have one!!!!! thanx fdor the video!!
@RobertWiggers
4 жыл бұрын
Hello, Just before the 7 minute mark, you hit "Keep acces controle Enabled" and you see a message appear at the top, that you are logged in. It doesnt appear with mine. Ive enterd a username and password is correct/matched in both boxes. But nothing happens when I hit the big blue button. How can I get going?
@AjayTicku
3 жыл бұрын
Great video! You should also mention that users should change the default raspberry pi password via SSH.
@Crosslink3D
3 жыл бұрын
Good call! Always best practice.
@yorkshiresfinestpair
3 жыл бұрын
Looking into getting this for my printers, question is i have 2 printers so do i need a PI for each printer or will 1 PI run them both at the same time..? thanks..
@Crosslink3D
3 жыл бұрын
It's doable but this will result in some modifications on the software side. You will basically run two instances of Octoprint in parallel on different http ports. I did not try it yet because having two raspis is just easier to setup in the first place.
@yorkshiresfinestpair
3 жыл бұрын
@@Crosslink3D many thanks replying to me, I think i'll just get 2 PI's then for the easiest.. thanks again..
@yorkshiresfinestpair
3 жыл бұрын
@@Crosslink3D sorry for asking another question, but hopefully you could help. Do i need to install heatsink or fans onto the PI 4 or will it cope with running the printer + timelapse without.??
@chronicgotwitch
Жыл бұрын
I cant find my raspberry pi anywhere in the network it's like it's not connected anyone know why?
@MaxGoddur
4 жыл бұрын
Like the video and will look through your videos and see if you have any on setting up the cam using windows 10 instead of Pi.
@JohnWhitwood
Жыл бұрын
Has anything changed since this video in 2020?
@matuskunik2068
4 жыл бұрын
Hi Daniel , good video as usual.. i have small problem, when i click to your giveaway link, it transfer me to wordpress setup page..? has anyone the same problem..?
@Crosslink3D
4 жыл бұрын
Thanks for the info, I fixed it so it should work again!
@NaraaErik
4 жыл бұрын
Thank you very much!
@AndrewAHayes
4 жыл бұрын
Daniel is the approx print time accurate in Octoprint?
@donmezzma
3 жыл бұрын
Do u not install r pi OS ? Only install octoprint on sd card then plug it in and use it like that ?
@Crosslink3D
3 жыл бұрын
Raspi OS is Part of the OctoPi Image so you don’t need to install it beforehand
@cjsawinski
2 жыл бұрын
For the life of me i cant seem to get my wifi working on my 3B board....cant find it on my router or anything
@rajualbeena
4 жыл бұрын
thank you so much
@no1fixer958
4 жыл бұрын
Great video for a nude such as myself.do you have a video exp,aiming how to log in on your phone from another location to check k on print?
@RalfSRobotRalf
Жыл бұрын
do you print PLA?
@karsonchristensen8045
3 жыл бұрын
can you just open the octopi wpa supplicant.txt using a notepad to edit and insert the wifi pass?
@Crosslink3D
3 жыл бұрын
Yes, you can!
@nuhwandahnu5549
4 жыл бұрын
ur awesome as is ur channel!
@joncheek2413
Жыл бұрын
PLA isn't Biodegradable
@itsmealextheme6259
4 жыл бұрын
Hello I’m having problems with this when ever I flash the image etcher always sais failed flash
@Crosslink3D
4 жыл бұрын
I had the same - in the end I used another sd card and it worked
@itsmealextheme6259
4 жыл бұрын
Crosslink thank you it worked
@jorgemdp
3 жыл бұрын
Great video!!! Thanks!!! :)
@Crosslink3D
3 жыл бұрын
Glad you liked it!
@juliendoes2044
3 жыл бұрын
get rid of the jokes and this is a good set up
@r7201103
3 жыл бұрын
what camera do you use
@Crosslink3D
3 жыл бұрын
For making my KZitem videos I use the EOS R with the Canon 16-35 2.8 II L as A cam and for B-Roll the EOS RP with the Tamron 24-70 2.8
Пікірлер: 162