I went to Amazon first to see if they had these. It only had a picture of the hinge. So I decided to come here to see if someone might have done a video for them. Well here I am 😅. Great job in every aspect. I felt like you were an online personal instructor. I don’t think you missed a thing. Ty 👍🏻👍🏻👍🏻
@EquipMeOT
Жыл бұрын
Thank you for the kind comment! I’m glad it was a helpful video! Love these hinges!
@neechi_97
8 ай бұрын
I can't thank you enough for this. I just bought my first home and I am currently trying to make my house more accessible for my mother when she visits/to encourage her to come visit by making it as comfortable as possible!
@kellarwilson2851
5 ай бұрын
I agree with the comments. I’m tackling this project this weekend, and I couldn’t ask for a clearer set of instructions. The tips you gave for this are superb. Not only do they answer questions I was having, but are likely to save me hours of frustration. Thank you!
@devonmc5982
2 ай бұрын
Thanks so much for this video! I have a hard time visualizing how pieces will fit together sometimes and these hinges messed with my head. Your instructions and tips really helped make this an easy task.
@albertreiff7451
Жыл бұрын
Great information and great video. I am an occupational therapist and Southwest Wisconsin doing Home care in private practice. I used your video to help me the other night when I was installing some of these for a client.
@EquipMeOT
Жыл бұрын
That's awesome! Glad to help!
@WigsGlam
Ай бұрын
Great idea… I purchased these and installed them by your step-by-step instructions. They did give me enough space to get my wheelchair inside the door, but not my walker.… and because of the design of my trim, the door would not close completely unless I were to cut out or remove my trim to make the hinge lay together flat. I do not like to be cold in the winter time so I do not want my door to not close properly.
@bogusemail4781
Жыл бұрын
Thank you so much for the brilliant video. It's the only one I found with such installation details and specially the headache saving tips. Luckily my 2-hinge bathroom door opens/hinges on the OPPOSITE door frame/jam and the pin faces up after installing 2 separate hinges from Amazon. But one should be able to remove the pin before installation, install the hinge plates separately, and finally reinsert the pin the right way. Alternately, you could pop the pins out AFTER full installation but make sure you shim the bottom of the door securely against the floor FIRST so that the weight of the door doesn't damage the jam at the bottom after removing the top pin. In my case, after installing the new hinges, the door got shifted (by one thickness of the hinge plate) towards the frame and it would NOT close at the top. I had to first shim the door against the floor, remove top hinge from the frame/jam, chisel out about 1/8" of material from the TOP hinge cutout/pocket, and reinstall the top hinge with the provided 3/4" screws. The door now closes perfectly but the distance between the frame/jam hinge and the free end of the door has now increased by almost 3". This causes additional stress on the TOP FRAME HINGE, when the door is fully open, with a heavy door or if someone pushes down on (or hangs someting heavy from) the door handle. This is fixed by replacing the 3/4" MIDDLE screw of the top hinge (or the screw or screws closest to the edge of the hinge) with a 2.5" or 3" long screw so that the hinge now screws into a stud instead of just the door jam. The longer screw should be inserted AT A SLIGHT ANGLE towards the center of the door jam to ensure that it engages a stud. The screw head will no longer be flush with the hinge plate and it may protrude a bit but this does NOT interfere with fully closing the door. As a precaution I also replaced the middle screw of the BOTTOM hinge in the same manner. The door now opens and closes solidly and it provides almost 2" of additional clearance. All that for less than $25 in materials and about 1 hour of labor.
@user-vl2yq4is4n
7 ай бұрын
I appreciate you. We had slight hiccups but this video made it easier.
@trsnb
10 ай бұрын
Excellent tutorial! As an RN I have done teaching of complex topics for the public for years. It is not easy to distill key technical points and cautions. To explain a thing simply one must understand it well ---you did a great job.
@EquipMeOT
10 ай бұрын
Thank you so much!
@garyp.7501
Жыл бұрын
Thanks for making this video! Nothing like having you make the mistakes for us, ie door first, frame second. And yeah your teeshirt says it all!
@alexkuehl6306
Жыл бұрын
Great video and recommendation! I saw you post about these hinges on IG earlier and I've converted 2 out of 5 doors. We will save thousands of dollars - thank you!! And I messed up a few times on my first install too. One tip I find helpful when installing by myself is actually to remove the pin from the hinges, screw the pieces on separately, then line up the door and reset the pin. I also had trouble getting the door to latch closed so I removed the trim on the inside doorway for a tighter fit, then reinstalled smaller pieces around the hinge. Thanks again!
@EquipMeOT
Жыл бұрын
Glad they worked for your needs! Those are helpful suggestions, thanks for sharing!
@PongoXBongo
Жыл бұрын
I did the pin-popping trick too while helping a friend install these as he's now in a wheelchair after an accident. I laid the doors down in the ground so he could install the door-side of the hinges while I installed the frame-side of them. Made short work of an entire hallway's worth of doors like that.
@johnpauljones965
2 жыл бұрын
Love this! Gonna be doing this on all the doors (bathroom and bedroom) in my mother’s house.
@EquipMeOT
2 жыл бұрын
Great idea! It makes a big difference!
@veronicafuller5286
5 ай бұрын
Wow. Thanks so much for your video. I knew I would be able to do this as all my sisters call me handyma'am, however I am especially thankful for the advice of putting the hinge to the door first! Saved me time. Was a very easy install as all the hardware was the same size.
@jeffreygura8171
Жыл бұрын
Excellent and thorough explanations with very clear video of installation and final function.
@adamjohnston4879
Жыл бұрын
Thank you. Followed your instructions and got them installed. The extra width was a big improvement.
@EquipMeOT
Жыл бұрын
Yay! Glad you were able to install!
@timbui5556
5 ай бұрын
Thank you for making this clear, informative and wonderful video!
@rayjonprayjohn
6 ай бұрын
Omg😅, ty so much for posting, helped me do it right the first time, usually I try several ways to do projects
@WigsGlam
Ай бұрын
This is such an excellent idea without having to hire a contractor to make the doors bigger!!!
@mizlola68
Жыл бұрын
YES! Thank you! I did it!!!
@EquipMeOT
Жыл бұрын
Yay! You’re welcome!
@briankrebs890
Жыл бұрын
Also when putting your screws into the old holes, put a tooth pick in it . Keeps the screws from stripping
@diyvideojunk2066
Жыл бұрын
Very useful and informative - it's given me an idea to solve a problem. Thanks for taking the time !
@EquipMeOT
Жыл бұрын
You’re welcome!
@jhennesay
9 ай бұрын
Thanks and wouldn’t have known about this simple option.
@dorenemadrzykowski8426
Жыл бұрын
So many handymen dont know anything about these. My dad just moved into AL, bedroom doorway too small. I had to order these and install them myself.
@EquipMeOT
Жыл бұрын
So true! They should be the default in AL facilities!
@tonyd1149
2 ай бұрын
Thank you for making and posting this video. God[Bible] Bless you.
@stonecrestquilt
4 ай бұрын
Thank you for showing this!
@spondulix99
Күн бұрын
My only suggestion is to remove the lower hinge first. Otherwise, there is the possibility of the door falling over on and injuring the person while removing the lower hinge. If the upper hinge is removed last, the person will be standing fully upright when, and if, the door, now completely free, falls away from the door opening. In that position, the person can easily prevent the door from falling away from vertical. Not so if the last hinge removed is at the bottom of the door. For the same reason, after attaching the new hinges to the door itself, the upper hinge should be the first to be attached to the door frame. Again, to prevent the possibility of the door falling over onto the person while attaching the lower hinge to the door frame.
@coollee303
6 ай бұрын
Thank you. This video helped me immensely.
@EquipMeOT
6 ай бұрын
You're very welcome!
@shawnkenney4344
Жыл бұрын
Just one thing, i learned this the hard way. I assume it applies to all hinges. there are two different curves to the plate. The larger curve ( featured here) will fit in the door if the smaller curve was used prior ( see the gap where the door and frame was rotored ), but not vice versa.
@trsnb
10 ай бұрын
What curve are you referring to?? What is curved? Is that why there is a mark that she mentioned??
@jackhammer_au9961
4 ай бұрын
Brilliant! I've got a disabled Mum who's having trouble accessing the toilet. These hinges are gonna help heaps. Thanks for showing this! Love your channel.
@PongoXBongo
Жыл бұрын
No wheelchairs in my house (yet, knock-on-wood), but these look ideal for widening a garage door for ease of garbage bin and wheelbarrow access.
@hugoreis2445
Жыл бұрын
Really good your video, I had no idea how this works, thanks
@EquipMeOT
Жыл бұрын
You’re welcome!
@kblake8955
6 ай бұрын
Thanks - very helpful
@reachandler3655
Жыл бұрын
Excellent content, thankyou.
@tillmansr2002
5 ай бұрын
Great video, how does this work on a door that swings the opposite direction? Is the 'bulky' part of the hinge always on the side which the door swings into? If so if the door swings toward the room opening (like a closet), would the bulky part be on the room side (always in view)?
@adharamartinez4427
Жыл бұрын
Thank you for your video.
@dazzerin1
Жыл бұрын
Thanks it was a great video
@fredartus9571
Жыл бұрын
great offset hinge video
@EquipMeOT
Жыл бұрын
Thanks!
@calyre
5 ай бұрын
Will this type of hinge allow the door to open 180 degrees?
@ClarkeLSmith
11 ай бұрын
I have a quick question: Do you think that this was the correct size hinge? I noticed when looking on Amazon that there are hinges that will fit either the 1-3/4" or the 1-3/8" door - but the one in your links states that it will fit BOTH sizes... so it MUST be larger that the one that fits a 1-3/8" door... this may be why at 04:35 you can see such a wide offset before the angle that would normally fit against the edge of the door...
@peacefulpear8
Жыл бұрын
Fantastic! Tyvm!!!!
@EquipMeOT
Жыл бұрын
You’re welcome!
@peacefulpear8
Жыл бұрын
@@EquipMeOT I have questions. It seems to me using this would push the door back, closer to the wall. Would the door knob then be in the way? Also does it cause the door to swing out at a longer length than it originally would with normal hinges?
@dinaclapinski
2 жыл бұрын
Very helpful!
@EquipMeOT
2 жыл бұрын
I'm so glad!
@pantherkittysoftware3918
2 ай бұрын
Does anybody make offset hinges with about1/2" LESS offset than the nominal "2 inch" ones? My mom's wheelchair can *barely* scrape through the bathroom doorway with about 1mm to spare, but the offset hinges I bought (with 2 inch nominal shift) are a little too big to fit due to the doorframe being too close to the perpendicular wall (the door trim itself was trimmed to accommodate the profile of the wall tile on the perpendicular wall). For what it's worth, the hinge I originally tried was 63mm (measured from the outermost part of the hinge-pin shroud to the surface that would be in contact with the door... the nested inner part was 59mm). To fit, it needs to be about 9mm less (let's say 1cm if I don't want to live dangerously and risk having it not fit if my measurements are slightly off).
@jenniferbondeson7584
Ай бұрын
The hinge pin is upside down here and falls out. Great video until my pins fell out!
@nicholasbalandiat9563
2 жыл бұрын
I do have a wall that the door swings against. So what's the clearance do you need for your hinge. (how close can the wall be?) Also how far does the door shift INTO the room since the interior door knob will hit the wall when I swing this door open all the way but the bathtub is close like 4-6 inches.
@EquipMeOT
2 жыл бұрын
You'll need 3.5 inches of space behind the door to accommodate the hinge and the door width.
@sharondipitous38
Жыл бұрын
@@EquipMeOTHi. Is the 3.5" beyond the frame or can you include the frame?
@bogusemail4781
Жыл бұрын
@@sharondipitous38 I think she means to measure the distance from the "inside" of the door (in the 90-degree open position) to the wall and you need this to be at least 3.5". So, it would seem that it doesn't matter how wide the frame is since it would be out of the way in the new open position after installing the offset hinge. But if you have a door knob that sticks out more than 3.5" then that is a problem. Or if there is a towel rod or rack on the wall then you need to account for that too. Also, the swing side of the door may move closer to the frame (by an amount equal to the thickness of the hinge plate material) so it may be a tighter fit when closing the door or it may not close at all. Best to do a dry fit first before removing or drilling anything.
@LubaLuba1
Жыл бұрын
I have a question you might be able to help me with i want to leave the sliding doors i have but put hinges on the doors are these special hinges?
@user-sf7ho5cu5c
Жыл бұрын
Hinges is installed upside down. The pin for a hinge always faces up. This was the wrong hinge for this application. A hinge installed with the pin facing down leads to the pin falling out over the years.
@bogusemail4781
Жыл бұрын
I can confirm that the hinge pin faces UP for a door that opens/hinges on the OPPOSITE side of the door frame from the one in the video. Alternately, like someone else here suggested, maybe the pin can be first removed, then the hinge plates can be installed separately on door and on frame, then the pin can be reinserted the right away. Can also remove and reinstall the pin after the fact but it requires some care and planning to avoid damaging the door jam due to the weight of the door. I would shim the door bottom first, then remove the bottom pin, reinstall it, remove and reinstall top pin.
@stevedillenschneider9929
3 ай бұрын
Has the pin on the top hinge fallen out yet? Or did you correct your installation after posting the video?
@Ki-Lessons
7 ай бұрын
While you had the door off the frame, this would be the time to cut the bottom of the door about 1/2 min, and why? Now the bloody door will clear the carpet you should also have in the bathroom.
@joannaleventisnoonan2076
Жыл бұрын
Are the hinges supposed to hang upside in your video?
@joannaleventisnoonan2076
Жыл бұрын
I mean the pin
@kathydestefano4342
Жыл бұрын
Hi. What is the link to these hinges on Amazon?
@EquipMeOT
Жыл бұрын
amzn.to/3NGHAE0
@cal30m1
2 ай бұрын
All my interior doors have 3” hinges, ain’t I lucky?
@nicholedawson6841
Жыл бұрын
Why not lay it on its side so you don't have to reach up like that since it's already freestanding? It'd make everything easier. With that said, I'll be going to the store today. Lol
@EquipMeOT
Жыл бұрын
It was nearly impossible to film it in our super narrow hallway, and I couldn’t lay it down on the space easily. It’s def an option though!
@Israel-hn3lw
9 ай бұрын
A man would have taken the pins out first and it would have been faster and easier
@dylanmoore7466
4 ай бұрын
Its almost never easier to do that when you are replacing the hinge to begin with. Redundant step. Stop being a pitiful misogynist
@tonyyglesias7784
Жыл бұрын
O.K. could have been a 2 minute video, too many breaks.
@EquipMeOT
Жыл бұрын
It takes more than 2 minutes to install new hinges on a door. I like it to be realistic for those doing it at home.
@KJ-tq3sm
Жыл бұрын
What? get your man to do that and make him a sandwich. Gender roles are key to a happy relationship.
Пікірлер: 81