Just did this on our 2022 4*e and it worked great. Thank you for the video tutorial. Your hitch and wiring is truly plug and play.
@tommyibrahim146
Жыл бұрын
I have the 2022 4XE as well, do you recommend this exact one as well?
@cthomp1667
2 жыл бұрын
Great video! This 60 year old Mom can't wait for her son to install, will be doing it tonight! 🙂
@Quadratec
2 жыл бұрын
Get in there with him! it'll be a great bonding experience.
@cthomp1667
2 жыл бұрын
@@Quadratec ohhh I totally meant I was going to do it because I don’t want to wait for him lol. I couldn’t get the bolts off last night get a ratchet wrench tonight :)
@richganz6853
2 жыл бұрын
As a new jeep owner I appreciate these videos. And if your goal is for me to purchase your product over the dealership (which I was planning to do prior to watching this video), then mission accomplished. I’ll be buying and installing Quadratec. Great job!
@Quadratec
2 жыл бұрын
Thanks for the feedback! you'll be very happy!
@scottanderson6129
2 жыл бұрын
@@Quadratec I just canceled the dealership order. Installing on my 2022 Rubicon 4XE. Even though you say it won't work, many other shave installed without issue.
@BennyTygohome
2 жыл бұрын
Great vid, overview instruction, and was interesting. Some people will order theirs installed from factory or by dealership not knowing how easy it is to purchase and install themselves.
@danharris4528
Жыл бұрын
This is why I buy from Quadratec! Thank you for the clear explanation.
@mikejohnston5159
5 ай бұрын
Came here to find the underbody routing. Thanks for noting
@rossnugent4520
Ай бұрын
Hello. I just installed the hitch on my 2024 Sahara with plastic bumpers and it took me @ 15 minutes, simple. I read a comment that the bracket that you rest inside the bumper does not allow for the hitch to install and you may have to remove the bumper, Not True, Goes right in. I have not installed the wiring harness yet but expect it to be a lil bit more challenging. I am installing the wiring on the passenger side as that is the side where the battery is located and I read a comment that the wiring could use another 8 inches, we shall see. Ps: Someone posted the same Chinese hitch is available on EBay for $39 shipped. Just because it looks similar does not mean the metal and welds are the same and good luck with that Chinese wiring lol !
@melmalnourie2796
2 жыл бұрын
I bought this setup and the hitch itself was a snap BUT the wiring harness was a bit of a problem as the length of the harness was short. I made it work but 8 more inches would have been nice.
@thirtytwoforty
2 жыл бұрын
I want to see the wiring install! Why can't anyone show the damn wiring install!
@Voltomess
2 жыл бұрын
I also wanted to see the wiring installation did you bought it?
@thirtytwoforty
2 жыл бұрын
@@Voltomess I decided to just have the local trailer dealer install it. My local Jeep dealer send their installs to them anyway. $490 later and I’m all set.
@Voltomess
2 жыл бұрын
@@thirtytwoforty good idea this is like a 10h annoying job. Have you seen those harnesses for 07-18 JK jeeps? they're basically plug and play and those for 18-22 JL are nightmare.
@clifft7832
Жыл бұрын
Good visual. This is as simple as taking a tire on and off. The hitches are made in China, and they are on ebay for $39 shipped.
@mikesmith4764
11 ай бұрын
Ur wiring part is worthless if ur not going to show how to install it
@bruteforce122481
9 ай бұрын
Great video
@miken9484
2 жыл бұрын
Just ordered
@saralecroy6710
Жыл бұрын
He does this without a bumper attached because the hitch won't go on with the bumper attached. @ 5:55 or so he says slide the bracket into the bumper but there is no room it barely moves. I think I have to remove the bumper to make this work
@clift8946
Жыл бұрын
I just did this on a '23 Sahara, and was able to do it with the bumper still installed. It's snug, but it works. Once I finally found the part of the video that describes the install, what's illustrated here is the best description I've found anywhere.
@edwardlittle27
10 ай бұрын
I just installed on a '22 4door Sahara. There is barely any room, I had to get my dad to wedge a big ass screwdriver in between and push the bracket back so that i could slide the hitch in between. It worked without taking the bumper off, but it was annoying.
@mikeblaszczak5346
Жыл бұрын
Does the Quadratec kit not support a 7-pin connector?
@nasomaz
2 жыл бұрын
when are they back in stock?
@Captainiwack
Жыл бұрын
Will this work on 23, i have tried 2 other recievers that say fit 22 model but my 23 2 door is different
@chupacabraattack
2 жыл бұрын
Do I need the controller if I am towing a trailer without brakes?
@brandonwaltersvc
2 жыл бұрын
Does this harness work with the LED lights on the sahara or will that require a different wiring harness?
@teerock23grow
2 жыл бұрын
Will that hitch work on a fab fours rear bumper for 2018 Rubicon?
@andreahaley4770
2 жыл бұрын
you didn't mention a 2021 Jeep Wrangler Islander 2 Door.
@brandoncassidy807
7 ай бұрын
These instructions are incorrect for my Jeep which is a 2020 Rubicon Recon. (I have 2 bolts Not centered) and a backer plate on my steel bumper which you cannot removed unless you disassemble all of the extra pieces on the bumper. Does recon not get to tow? Pl
@frankfurther3828
10 ай бұрын
where is the hitch made?
@tdozzy991
2 жыл бұрын
Instructions for the easy to install hitch but fast forward through the electric harness. Thats a thumbs down
@invictuscenturion8468
2 жыл бұрын
Diesel may be a bit different
@DudeManBroShow
Жыл бұрын
Over time that rubber fastener for the plug will fail leaving it hanging. Bad design in my opinion
@SirThunderPants
3 жыл бұрын
$158 + Tax + shipping..... Eh. Not as over priced as most Quadratec offerings.
@BennyTygohome
2 жыл бұрын
That's with the wiring too. 69.99 for just the hitch with hardware and that plastic plug. Good price. Great product. Mopar parts counter will ream your wallet for theirs from factory
Пікірлер: 39