Holdtight *Please click the thanks button If I've ever helped you out!* 🍺 JOIN THE Alearmy Exclusive weekly live videos on Thursday : kzitem.infojoin 🛠 ALL OUR TOOLS ON AMAZON www.amazon.co.uk/shop/plumberparts 📺 VLOG CHANNEL: kzitem.info
@jamesswinyard530
3 жыл бұрын
I had similar issues, ended up using no more ply - cement board that’s 12mm thick. Really solid stuff.
@adamroutley
3 жыл бұрын
This channel has helped me so much since moving into our 60s bungalow. This channel has given me the confidence to rip out the whole bathroom and re-fit a new one! I'm going to tackle a new central heating system off my new found confidence thanks to this channel. Just need to find a plumber who will move my boiler and is happy with me doing the donkey work.
@syncrosimon
3 жыл бұрын
In exactly the same boat, need a helpful diy friendly gas engineer👍👍
@EC-gu2sc
2 жыл бұрын
Watching you setting up your copper pipe work is like seeing someone make balloon animals for the first time!! Really enjoying the channel. Thanks for all you’re doing here!
@georgeturner6648
3 жыл бұрын
Much easier to alter studs and mount valve to correct depth. face over with Jackoboard which comes in various thickness. Tile direct. Job done.
@MrAas41
2 жыл бұрын
Yeah I'm just a diy'er and have seen most people do it this way. Mounting the valve on a 6x2 attached to the stud
@TheJask101
Жыл бұрын
Really appreciate the time and detail you go into. I thought I’d put my money where my mouth its but well worth it.
@plumberparts
Жыл бұрын
Thanks!
@plumberparts
3 жыл бұрын
KZitem IS WORKING ON RESOLUTION. This was uploaded using my usual 4k 50p settings. I'm talking to support now....God help me!
@tedcopple101
3 жыл бұрын
I'll "hold tight" then 😉
@fazerstorm-oap
3 жыл бұрын
Just did a broadband speed check to make sure it wasn't my end! 🤣
@AcheForWake
3 жыл бұрын
Watched at 1080p, on the phone baby!
@Jammydodgers41
3 жыл бұрын
@@fazerstorm-oap same here. Was about to bell EE over it
@theetheeyog9878
3 жыл бұрын
You saying i have to pay 50p to watch this video in 4k? You can do one pal
@benjamindagg1043
3 жыл бұрын
That was awesome how you made you and big G in the toy truck, great bit of filming. Plus it was funny when Emily jumped when testing the taps near the end bless her. Thank you great video as normal 😊
@richardtarrant4677
3 жыл бұрын
😂😂 that bucket handle😂😂 The random annoying things that happen at 8pm for a plumber! I bet at first you wanted to blame Emily 😉
@plumberparts
3 жыл бұрын
Always! 😂
@faisalmoghal4055
3 жыл бұрын
@@plumberparts I wanna know why you didn't get a close up shot of Emily jumping when the slug of air came through the tap 😂😂😂
@paulrobinson6562
3 жыл бұрын
When we did my parents bathroom concealed shower, the handset thread was to short to go through tile, adhesive, backerboard and OSB. Since we had already tanked we had to cobble together an arbour backwards to cut out the OSB inside our boxing
@jeffjapes579
3 жыл бұрын
Top video James, soon to be tackling a bathroom refurb so some great nuggets and potential pitfalls to look out for.. After seeing your heat mat and tile under your soldering when doing the filler valves I was then waiting for you to set light to the floor membrane when you came to solder those 90s....
@MrDbone75
3 жыл бұрын
Good Saturday morning to you sir and your family from Wellington Somerset
@hde9987
Жыл бұрын
I think your Top Man! Confidence building
@DBPLUMBING
3 жыл бұрын
Could you not recess the ply between your studs? So face of ply is level with face of studs? Therefore gaining 6/9mm of depth on the valve? 👍🏻
@haroon420
3 жыл бұрын
I don’t think plumbers are carpenters. They don’t have routers 😝
@plumberparts
3 жыл бұрын
Nah I’m plying the whole wall. Makes life easier later in the job. Screens etc.
@syncrosimon
3 жыл бұрын
Been watching and learning from your videos for years, thanks for taking the time👍👍👍
@MK-un8rl
Жыл бұрын
Thanks
@plumberparts
Жыл бұрын
Thanks!
@grrarg9319
2 жыл бұрын
I have the exact same taps that were going into a solid wall. That was fun...
@ianparker9502
Жыл бұрын
Thanks. Really enjoy the video's and have helped me know end whilst refurbing my house. Happy DIY'r
@redline589
Жыл бұрын
Thanks mate your vids are great.
@plumberparts
Жыл бұрын
Awww thanks so much mate. Means a lot that you donated some of your hard earned cash!
@johnroberts4644
2 жыл бұрын
Thank you for explaining the bath taps I came acroo that problem my Self
@OwBrown
3 жыл бұрын
Could you have used a product like Schluter for the tile backer and forego the plywood?
@loafersheffield
3 жыл бұрын
Loafer: "What are you having on the floor. Vinyl or tiles?" Customer: "Vinyl" Bath levelled, battened, sealed, connected, tested. Customer: "Oh, we've changed our minds. Now we want the floor tiled. Can't you just trim the panel down?" Wobble wobble. See: Rolf Harris "wobble board" Or, er... Don't. Loafer erupts with George Carlin's "seven dirty words" Proceed with caution. You have been warned!!!
@copperskills3973
3 жыл бұрын
Bit of a backwards way to to it. Not a bad way but usually you put the tap in position first and pipe it up. You can then pattress the wall, recessing between the studs to give you your 9mm clearances you lost. 👍🏻
@ianblack1033
26 күн бұрын
Thanks!
@moose6676
Жыл бұрын
Once again a brilliant video 👍🏻👍🏻🤩🤩
@stephenblake99
3 жыл бұрын
Love this video (thanks) didn't see the thanks button
@ciananmchugh410
3 жыл бұрын
I done my bathroom similar recessed sink taps and bath bang tidy
@AlexPeka
Жыл бұрын
Thanks very much you helped me out on this
@TheHeavyend81
2 жыл бұрын
Absolutely love this
@barrywpatterson
Жыл бұрын
Brilliant video
@spring899
3 жыл бұрын
Nice work sir. Proper job .
@tomburley7616
Жыл бұрын
Please please Please someone tell me the name of the part that the water feeds into and the valve also screws into on these internal wall mount taps. It’s a 3 way knuckle seen here!
@oninbridders
3 жыл бұрын
You make it look so easy
@asif530
3 жыл бұрын
I'm more curious to know how the hell did the bucket handle jump up on its own... Great work as always
@plumberparts
3 жыл бұрын
GHOSTS!
@TheBailey2000
3 жыл бұрын
I didn’t think you could use the yellow tin hawk white on potable water systems
@hetoge
2 күн бұрын
Hi what brand are the taps you used thanks
@Dan-ml7no
Жыл бұрын
How would you fit these in a dot and dab wall then ?
@jaimedpcaus1
2 жыл бұрын
Oh, I was waiting for all the work to complete? The boards, the tile, everthing, everything...?
@darrenmackenzie1892
Жыл бұрын
How many times have you had your stop valve shut off
@johnwaby4321
3 жыл бұрын
Looking good James ... 👍👍👍👍 are you going to seal the floor where the two 22mm pipes come through the floor for the bath taps ..
@MARTINA-gc3tq
3 жыл бұрын
I suspect that the designer of the valve didn't think anyone would double up with ply and cement backer....
@plumberparts
3 жыл бұрын
Hardie on its own (so not 6mm) and a tile with adhesive would still have been too deep. My point is from a manufacturer perspective why not just give us a few more threads!
@hydrohobbyist
2 жыл бұрын
Why ply plus hardiebacker? Could you not have put a couple noggins in and just put hardiebacker onto studs? They’re supposed to negate the need for ply.
@plumberparts
2 жыл бұрын
I like to ply first so I always have a wood fixing wherever I need one. Means I don’t have to endlessly drill and plug! It’s my own gaff after all!😎
@johnthackray2820
2 жыл бұрын
Great video James. I'm looking at installing a replacement shower in an en-suit, still researching types and makes etc. Found the Bristan Artisan Dual Concealed Mixer Shower with Shower Handset + Fixed Head. Any particular advice for the installation?
@abuadammemon3968
3 жыл бұрын
Have you done any vedio on Lead pipe Main water lead pipe how to replace Or from lead pipe 15mm copper Else
@user-oh4qq4du3d
3 жыл бұрын
Might be a dumb question but how would you know that there’s no leaks on the other side of the wall?
@fredmorozov
3 жыл бұрын
Stains on the sealing XD Jointing compound and good soldered joint they recon 50year guaranteed
@simonstones1918
3 жыл бұрын
The dilemma of the bathroom fitter 🙄
@bluedan7425
2 жыл бұрын
great video as always! At 18:48 when you put the spout on, how is that sealed?
@Tensquaremetreworkshop
3 жыл бұрын
Don't. Fit an electronic bath filler, fed via the overflow. Taps (mechanical valves) are 19th Century.
@Applumbing74
Жыл бұрын
Just use moisture board and tank wall
@ktm-bc1dw
3 жыл бұрын
Good work sir
@johnphiliphughes2857
Жыл бұрын
That type of jointing compound should not be used on potable water
@darrensmith7304
3 жыл бұрын
I fitted the exact same taps last month. The threads are too short. After a change of plan and a few choice words all was well and the taps look lovely. Annoying though
@plumberparts
3 жыл бұрын
It's a shame most watching this video don't realise it. Going to do an explanation video in a few weeks.
@immers2410
Жыл бұрын
Can you mount the tap to the front of the ply? That way you only have say 6mm hardibacker and 15mm for the tile and adhesive to negotiate
@darrensmith7304
Жыл бұрын
I’m honestly don’t remember now sorry. The one I was doing there was no way to mount other than the threads. If they’d had fixings to surface mount onto a ply pattress it would have been easy
@renevwestrhenen4697
3 жыл бұрын
Jezus wat a resolutie xD
@mikegallagher2107
3 жыл бұрын
spot on fair play
@richardgmale2913
2 жыл бұрын
Thanks James - doing my bathroom at the moment and this really helped - have you ever tried one of these? Nerrad Tools NTJS1522 Jet Swet Pack -
@anthonybennett6008
2 жыл бұрын
Will the lever valves turn off with bath in place?? Lol Good video
@grahamatkins8845
3 жыл бұрын
Hi great video as usual but why is the picture quality of your last few videos very poor not usual nice and crisp.....regards Graham
@plumberparts
3 жыл бұрын
Yeah it’s a KZitem issue. Still uploading in 4k but YT takes ages to render it.
@darrenmackenzie1892
Жыл бұрын
Does your taps turn on going inwards or outwards?
@adnanpatel7148
3 жыл бұрын
Could you do a tools tour
@rayj7146
3 жыл бұрын
Could you use JG SPEEDFIT PLASTIC PUSH-FIT pipe to do this type of job or does it have to be copper. Thinking of doing a simlar job for my bathroom
@simonstones1918
3 жыл бұрын
Personal choice son.l.
@liamcowley8679
3 жыл бұрын
It's taken 6 months to get this far. Will it be finished by Christmas?
@plumberparts
3 жыл бұрын
NEVER!
@liamcowley8679
3 жыл бұрын
The longer you take the less likely my missus is to ask me to do mine
@LorenzKamo
3 жыл бұрын
Why use compression valves when you can use sweat valves
@crazzyskills2916
3 жыл бұрын
Thanks u✊
@ciananmchugh410
3 жыл бұрын
The ones I used were easier than them ones must show u
@AIJLarkin
3 жыл бұрын
Do you think you’ll have it all finished before you retire 😂
@klaasmoltmaker4519
3 жыл бұрын
Viega profipress !!
@petemoss8625
3 жыл бұрын
Dont know if ive spelt this right, but whats "Hardy backer", forgive me iam new to this game.
@davidthomas9165
3 жыл бұрын
Hardibacker brand name, is cement board. Rigid and can carry heavier weight tiles than plaster board. Can be tiled directly on to. Can also be used (as I have) as a liner for a fireplace as it is entirely noncombustible!
@j4bberwocky1
3 жыл бұрын
Why not hardie backer straight to studs, negating the pipe thread issue?
@plumberparts
3 жыл бұрын
It's too thin and I cant be arsed to take it back! 😂
@j4bberwocky1
3 жыл бұрын
@@plumberparts fair nuff
@simoncarney9944
3 жыл бұрын
@@plumberparts Hahahahaha! 😂 Like Richard I wondered why you didn’t use thicker Hardie backer boards and forget the ply and make life easy on yourself but this answer is a peach! 😂
@markjames9746
3 жыл бұрын
Don't need the ply on there man. Just put the hardies sheet on.
@plumberparts
3 жыл бұрын
Yeah I could but....the hardi's only 6mm and I can't be arsed to take it back and change it....all good now anyway! 😁
@mikecave4154
3 жыл бұрын
Don’t need the ply there just fix the cement boards to the stud wall
@plumberparts
3 жыл бұрын
Boards are too thin for this. 6mm is flexxy! I also like to play the whole wall for reasons you'll see in the next few videos.
@tedcopple101
3 жыл бұрын
Is this video super grainy for anyone else?
@plumberparts
3 жыл бұрын
It’s just about ok here. I’m on KZitem creator support about it now!
@plumberparts
3 жыл бұрын
Also select 1080p if you want it higher res...But there's deffo a glitch in KZitem land!
@FAT-NUT
3 жыл бұрын
Is there a reason you don’t use PTFE tape on the olives after crunching them?
@sdgelectronics
3 жыл бұрын
PTFE tape belongs nowhere near compression fittings.
@maxakarudy
3 жыл бұрын
So you tanked the floor, then cut holes in it for pipes, have I missed something?
@klaasmoltmaker4519
3 жыл бұрын
Viega profipress
@frankiepitt9135
3 жыл бұрын
I don’t blame you if you can’t solder.
@Dazy73
3 жыл бұрын
It would be funny if once you put the bath in you can’t isolate the lever valves 🤣
@stuntmanwill
3 жыл бұрын
I was just searching the comments to see if someone had mentioned this already 😂
@Daniells1982
3 жыл бұрын
I thought exactly this.
@nw5835
3 жыл бұрын
Why would you not be able to operate the valves.
@stuntmanwill
3 жыл бұрын
@@nw5835 once the bath is in place it will foul the levers, they will only be able to stay in a position in-line with the pipes.
@plumberparts
3 жыл бұрын
Bath is in place (finally!) They work fine. It’s got a nice run off on the design so there’s loads of room.
@doma5262
2 жыл бұрын
How do you manage it, the comment section full of know it all that do it by the book, but when you look at the work in their properties its bodged by them to fuck haha
@Alex-hp2hy
3 жыл бұрын
Fucking buckets😂
@badalmahor4443
2 жыл бұрын
Hindi me batao
@danielflynn1880
3 жыл бұрын
Sorry mate but Fluxuators are absolute shite🤣
@joachimullrich5237
Жыл бұрын
What language speaks this guy? Sorry but I understand nothing.
@fireblaster9961
3 жыл бұрын
So gimmicky now this channel
@lloydbarwick4977
Жыл бұрын
Thanks
@AbigailWhitten-fd6ef
3 ай бұрын
Thanks!
@bluedan7425
3 жыл бұрын
great video as always! At 18:48 when you put the spout on, how is that sealed?
@bluedan7425
2 жыл бұрын
Help.!
@vikingofengland
Жыл бұрын
Thanks
@stevehowells2978
2 жыл бұрын
Thanks
@jackx1990
2 жыл бұрын
Thanks
@KevinRoper1981
2 жыл бұрын
Thanks
@plumberparts
2 жыл бұрын
Cheers Kevin!
@autovlogz
2 жыл бұрын
Thanks
@plumberparts
2 жыл бұрын
Thanks man!
@MikeFairbrass
3 жыл бұрын
Thanks
@plumberparts
3 жыл бұрын
Cheers Mike! Means loads mate!
@tomcooksey191
2 жыл бұрын
Thanks!
@plumberparts
2 жыл бұрын
Wow man! Thanks so much!
@syncrosimon
3 жыл бұрын
Thanks
@plumberparts
3 жыл бұрын
Thankyou Simon!
@tommyblackman7119
3 жыл бұрын
Thanks
@plumberparts
3 жыл бұрын
Cheers Tommy, means loads mate!
@weeniebeastie
3 жыл бұрын
Thanks
@weeniebeastie
3 жыл бұрын
Just a small token to say thanks, always informative with good humour. Couldn’t really afford a patron type payment but it’s always nice to be nice when you can.
@plumberparts
3 жыл бұрын
@@weeniebeastie Thanks so much dude!
@geoffreynicholson6704
3 жыл бұрын
Thanks
@plumberparts
3 жыл бұрын
OH WOW Geoff! This is amazing mate. I'm flabbergasted that you've sent me this much money....it means so much to have helped you out so much. Huge thankyou!
@geoffreynicholson6704
3 жыл бұрын
@@plumberparts you're very welcome, over the past years through health issues causing long periods off work and the memory gets really really rusty, so with what you do has really helped me get back into work again you don't realise the help you give it means more than you will know thank you. Geoff
@plumberparts
3 жыл бұрын
Ah mate, thanks so much. Hope all is going well with work now!
@darraghkeane8538
3 жыл бұрын
Thanks
@plumberparts
3 жыл бұрын
Wow! Cheers Darragh. You bloomin' legend!
@darraghkeane8538
3 жыл бұрын
@@plumberparts I owe you more, I've learned so much from your channel over the years. Keep it up!
@plumberparts
3 жыл бұрын
@@darraghkeane8538 Haha! No worries!
@davidthomas9165
3 жыл бұрын
Thanks
@davidthomas9165
3 жыл бұрын
I installed a new hot water cylinder thanks to you. Been a year and it's not leaked yet 😂
@plumberparts
3 жыл бұрын
Good to hear bro! Bang that thanks button if you can afford to swing me a beer! 😂😂
@plumberparts
3 жыл бұрын
IGNORE! For some reason my phone isn't showing this as a super, but my lappy is. Massive thanks to you mate. Have a wicked day!
@davidthomas9165
3 жыл бұрын
@@plumberparts No worries, you too!
@martyhimself3947
2 жыл бұрын
Thanks!
@martyhimself3947
2 жыл бұрын
Argh it auto-posted a lame comment, great video with some good advice on doing mock-ups to avoid cock-ups 😁
@aderead
3 жыл бұрын
Thanks
@plumberparts
3 жыл бұрын
Cheers Adrian. You massive legend!
@aderead
3 жыл бұрын
@@plumberparts Ha ha, you're welcome James. Your videos have been amazing and I've done so much in the house just from watching them! Just wanted to say thanks and let you know that all the help you give people is appreciated! :-)
@plumberparts
3 жыл бұрын
@@aderead cheers bro!
@brianwood5220
3 жыл бұрын
Thanks
@plumberparts
3 жыл бұрын
Thanks Brian - glad I've helped you out....I've changed the wire now! 😂
Пікірлер: 170