Note: The Antenna position, Is just the way i wanted it. And The Look I Was Going For. So Don't Waste your time telling me Otherwise. Thanks.
@rjramos2775
6 жыл бұрын
Share Entertainmentz you know what? That antenna cover is for rear antenna, idiot!
@vishaltripathi3964
6 жыл бұрын
Randall Ramos really man this guy has completly fucked up the shark fin antenna installation and special mention for fucked up music as well. Hahahhahaa .. 🤣🤣🤣
@TruSkyBlue7887
5 жыл бұрын
Hahah looks shit, on backwards and designed for the rear of the roof! You will have to take it off to sell it!
@YellowBoard
5 жыл бұрын
Looks like Yondu's head :) :) Next time put Spoiler on the front as well. We dont waste your time telling. We love to laugh
@richardmorgan597
3 жыл бұрын
That is supposed to go on the rear 🤦♂️😅 Your car, your rules I guess but I'd have left it as it was. Looks stupid imo.
@Derek-fl8yu
3 жыл бұрын
For anyone wondering, this is entirely for aesthetic looks. You might have some more interference and a bit of signal drop with for FM radio, the 3M adhesive that comes with these kits is typically strong enough to withstand an automatic carwash and to remove it if it starts to come off, you'll need a heat gun, hope this helps anyone
@brancetaylor8189
3 жыл бұрын
Now is it a massive drop to where you absolutely can’t use it or is it spotty cause I just use my Bluetooth in my dart and was thinking about buying this.
@benconnors6645
2 ай бұрын
@@brancetaylor8189 was wondering the same thing I just use the bluetooth in my Dart as well
@anthonyfigueroa1288
5 жыл бұрын
Did you mount this facing backwards???
@davidpriskin7254
5 жыл бұрын
yes :D
@beastmaster645
5 жыл бұрын
mohawk 😂
@stephenpaul3440
4 жыл бұрын
I thought that too !!
@freerider4700
2 жыл бұрын
He did. And I was searching in comments for this 😂😂
@drewshady3836
2 жыл бұрын
🤣🤣
@Disneylandrides.
Жыл бұрын
Honestly, that looks a lot better than the old antenna.
@UdiKoren
6 ай бұрын
but only if you installed it right
@davidespinosa9901
Жыл бұрын
Absolutely mounted it backwards 😂 but hey it’s yours. 👍
@user-uh1hi8pw5q
Ай бұрын
Nah, your trippin lol
@Cariman630
10 ай бұрын
0:06 Great video. Didnt realise it was so easy to connect to existing Antenna. Thank you. Subscribed.
@shareentertainmentz
10 ай бұрын
THANKS 😊
@Charles-zf6lk
2 жыл бұрын
You forgot to tighten down the screw with a Philip to make a good contact so it doesn’t come loose.
@Palatard
Жыл бұрын
It's bound to shake out of position with vibrations over time...
@motosporttouring
3 жыл бұрын
That’s it? Wow, ok thanks for the video! Glad I don’t have to remove the other antenna base and mess with headliners.
@Budget-Cars-And-Bikes
6 жыл бұрын
I would suggest putting a bead of silicon around the base too, as water gets in there, and can rot the metal roof, and the electronic part of the antenna under that fin, and then you will have major issue's with rust in a couple of Years,
@WildDanHibiki
5 жыл бұрын
Wouldn't that make the 3m aggressive less effective?
@zamanraja9531
5 жыл бұрын
That doesn’t make sense as the original aerial let water in too what difference does it make
@mrchicken8325
3 жыл бұрын
Silicon on the metal will cause the rust faster than any other thing, even water. Avoid silicon on ur car. If u see the windshield has a special glue that doesn't contain silicone.
@Budget-Cars-And-Bikes
3 жыл бұрын
@@mrchicken8325 If this is the case, then why do plumbers use it to seal bathrooms?
@jimshaw68
3 ай бұрын
nice video , I'm going to Try this , this afternoon .
@mischif9133
2 жыл бұрын
Wow, can't believe how easy this is
@simonabbott7323
6 жыл бұрын
Why not tighten screw with a screwdriver?
@PandaNesthesia
6 жыл бұрын
Because you need one of your hands to hold your phone
@grandparolie
5 жыл бұрын
Panda Nesthesia ok but once it’s glued it’s not coming off to tighten and if being used as a antenna it’s going to get bad reception if any.
@CP-ir4ey
Жыл бұрын
ATTENTION HATERS: Obviously he installed this backwards BUT if he would have installed it the other direction, it would look effed up because it would be hanging over his windshield. Therefore, there is a method to his madness. So to speak.
@Hello_there_obi
3 ай бұрын
when the music is as irritating as the placement lol it's not a rear wing 😂
@mistermister1813
5 жыл бұрын
My 2016 Subaru Legacy comes with a sharkfin antenna cover. It is currently leaking.
@CatJuiceSays
5 жыл бұрын
what do you mean leaking?
@mistermister1813
5 жыл бұрын
Looks like the glue seal wears out and allows water to seep into the antenna. The antenna has a rubber gasket that can also fail and allow water into the roof. I had water stains on my headliner.
@CatJuiceSays
5 жыл бұрын
might get your car roof leaking inside it nvm i won't buy fake shit shark fin antenna anymore
@robertwertz6050
Жыл бұрын
Irritating music!!!!
@madelineschriber336
3 ай бұрын
Insane music choice but I fw it
@onenoellbayona3007
2 ай бұрын
😂
@THECOMPANY2014
4 жыл бұрын
Big help man! Thanks
@TeshaLawrimore
11 ай бұрын
What kind of Tape are you using to Mount it down on the car ?
@imtiyazhussain6010
10 ай бұрын
It’s provided by the product
@steveb9399
5 жыл бұрын
so what if i dont have the piece you screw the bolt into anymore. where does the wire connect to the inside of that? im not replacing EVERYTHING on the antennae when i have the base but not the stupid rubber mess there.look at 1:57. i dont have that part but everything underneath.
@sneg1539
5 жыл бұрын
steve b did u ever figure it out I’m haveing the same problem
@winstonchaychel
4 жыл бұрын
I'm having the same problem too. Purchased an antenna from Amazon that says it fits my Grand Prix but when I went to install it found out it had more of a snap in and no screw in. Think I'm missing a base piece/adapter.
@jeremyladue4702
4 жыл бұрын
My question is, will automatic car washes pull it off??
@lebrongames524
3 жыл бұрын
I have the same question.Did u buy it/try it?
@tommullen2958
3 жыл бұрын
No it didn't come off in the car wash the 3M adhesive base is very strong. You would need to heat it to remove it.
@joyeb8413
3 жыл бұрын
Mine came loose because of the automatic carwash.
@Mississippiboy400
3 жыл бұрын
Yes I work at one at it knocked mine off
@walidshibani9593
4 жыл бұрын
you didnt tighten the screw
@Headshot1002
4 жыл бұрын
Also, thats back to front, hes fitted a shark fin to a ariel above the windscreen!!!! lmao
@kienwongkh9534
4 жыл бұрын
@@Headshot1002 lmao didn't notice till you say.
@gunjankumar6566
3 жыл бұрын
@@Headshot1002 😂
@dwaynebenjamin8731
Жыл бұрын
You should had use a hair dryer on the sticky part before put on the shark antenna.
@aerial_silks_hoop
Жыл бұрын
What do you mean? That's the rear windshield, right?
@TheJROBBIE
Ай бұрын
No, he's put it on backwards lol
@beco4690
3 жыл бұрын
Nice
@nancyelliot8687
4 жыл бұрын
Do they improve the reception on the radio
@tommullen2958
3 жыл бұрын
Mine didn't, I found the reception was not as strong as with the normal antenna, also much more interference.
@angiesplace24
3 жыл бұрын
Hello there do you know where I can purchase the type stripe please thank you
@Tipstech360
2 жыл бұрын
Available in Amazon and Flipkart
@angiesplace24
2 жыл бұрын
@@Tipstech360 Thank you!
@MrYobax
2 жыл бұрын
AliExpress 1 dollar or less
@fabrizioficarra3946
7 жыл бұрын
Is it safe at the carwash? Or there might ve a chance it gets pulled away?
@shareentertainmentz
7 жыл бұрын
+Fab Fabrizio hands on carwash YES safe. But Not suitable for (automated Carwash machine).
@alanlewls7378
6 жыл бұрын
Fab Fabrizio
@SSDavyS
5 жыл бұрын
if you really care about your car,dont go machine wash! always by hand!
@LoveBirds-zp5gw
4 жыл бұрын
This is what happened to my car last week. I think it got lose and when I drove off the car wash it fell off and now I am trying to see where I get one
@Gone_Rogue300
Жыл бұрын
The slant is what's not sleeping my tape to level up
@robinjones5912
2 жыл бұрын
Is it me or is it back to front
@callum7018
Жыл бұрын
No if it was the other way it would make the car less streamlined
@terrell1201at
14 күн бұрын
Mine came loose however I didn't see a wire
@aidanoconnor7718
3 жыл бұрын
Thanks bro 👍
@ConcreteJungle7
7 жыл бұрын
👍
@williewilson8244
6 ай бұрын
I just went to replace mine in a 2019 Suburban Premier well I have a coax or fiber running up to my so after tearing my headliner pretty much all the way out it has a way more aggressive contour that most and broke the cardboard so took everything apart to the back door handles to get in there to f with the thing I bought the replacement that didn’t have the coax so put some sealing strips under it and now it’s 3/16” the roof f GM I am going to Silicone the f out of it then drive it till I can go buy a Toyota!!!!!! American 🇺🇸 made shit can kiss my - a s s. 90,000.00 for a product and it has 5 major problems well not this sucker again!!!!! Shitty times to be alive!!!! So Sad to see the shape of this Country!!!!
@deanfincham7106
6 жыл бұрын
did you have a nut with yours as you just screwed it into the hole,mine came with a nut but never used it
@barryrobinson1142
6 жыл бұрын
Dean Fincham j
@aspegik
4 жыл бұрын
The nut is just so the screw won't get lost during shipping.
@khale1977able
2 жыл бұрын
Ummm sweetie I think you did it backwards
@ernestchinwuko6706
6 жыл бұрын
Do you have any beautiful antenna for fender
@MrYobax
7 жыл бұрын
thanks for the tutorial, the antenna work Fine for the radio?
@shareentertainmentz
7 жыл бұрын
+MrYobax no problem so far!. Thanks for Watching Mate🙏
@amgineco
2 жыл бұрын
Dont care .. use cell phone for pod casts, music.. I did it for the LOOK!!
@MrYobax
2 жыл бұрын
@@amgineco me too hahaha look more modern and aggressive, but the antenna work very well in this 4 years.
@mrchicken8325
3 жыл бұрын
Genius 👍
@christianandrade8172
3 жыл бұрын
😆😆😆😆😆😆😆😆😆
@mrchicken8325
3 жыл бұрын
@@christianandrade8172 seriously, I was about to remove the bottom part of the antenna.
@davidjpbernardes
3 жыл бұрын
@@mrchicken8325 Yeah, well I skipped the part of watching tutorials and actually removed my old one 🤦🏻♂️ I'm on my way tomorrow to buy a replacement to the OEM one 🤷🏻♂️
@queenplayzgg8497
3 жыл бұрын
Thanks 👍 he's my dad and Adams dad
@queenplayzgg8497
3 жыл бұрын
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
@robinjones5912
2 жыл бұрын
Isn’t it on back to front
@vyasmopidevi
3 жыл бұрын
Is there any signal drop for fm
@shareentertainmentz
3 жыл бұрын
No‼ And thanks for watching and please don't forget to SUBSCRIBE and SHARE. If you haven't Already😊
@tommullen2958
3 жыл бұрын
Works OK but the reception is not as strong as it was before with the whip type antenna.
@ahmedsherif8885
Жыл бұрын
What if you don’t have an antenna
@keepitup7210
6 жыл бұрын
Thanks!
@ivanavelar9037
3 жыл бұрын
What size is that screw mine did not come with one
@shareentertainmentz
3 жыл бұрын
Description Universal shark fin car antenna features:Easy to install. FM/AM radio with internal connection cable. Concise and modern design.Durable, classic, practical and beautiful.Style: shark fin (aerodynamic design). Package includes:1 aesthetic car shark fin FM/AM antenna. 2 threaded screws and 2 nuts for installing the antenna. 1 3 m sticker for affixing the fin.Technical specifications:Height: 6.5 cm. Depth: 5 cm. External width: 7 cm. Internal width: 6 cm. External length: 17 cm. Internal length: 9.7 cm. Material: high-quality ABS plastic.
@maf1986mf
Жыл бұрын
How to match it with your car color?
@kylechava3938
Жыл бұрын
paint it
@Mike9201984
Жыл бұрын
I don't care about replacing no damn antenna i just come here for the music
@noelmunyae6540
Жыл бұрын
does it come with its own glue to stick on the roof?
@wwnationyopi3298
Жыл бұрын
Yes!
@cockers6682
Жыл бұрын
3m tape always use a hairdryer to make it stick good and proper
@sharonross3899
3 жыл бұрын
Anyone know what this song is called ??
@jefftischler7422
3 жыл бұрын
someone abusing an electronic device
@queenplayzgg8497
3 жыл бұрын
He made the song he's my dad and Adams dad
@queenplayzgg8497
3 жыл бұрын
And stop being rude hipnicrit s be positive
@robertwertz6050
Жыл бұрын
Who cares
@mohammedshakir5935
Жыл бұрын
Abey, yeh ulta lagaya
@Mojo27564
3 жыл бұрын
Will this work for 2gen Prius
@shareentertainmentz
3 жыл бұрын
This antenna is universal, but double before buying it. Thanks for watching.
@rex2718
4 жыл бұрын
Good job bro
@seawinds12
4 жыл бұрын
is back to front
@joemisfit1331
3 жыл бұрын
Good job?! Lmfao... no. It wasn't at all. No screwdgie, fingertight assembly= shit reception, he connected the cable before peeling the 3m backing which means he had to redo it or go get scissors and cut the shit, then he didn't even attempt to conceal or pack the cable into the housing...... But most of all, the damn thing is on backwards!! Dude has straight up defeated the purpose of design. Just as well wire a fucking brick to the roof.
Пікірлер: 139