Braden is going to show you how to install our MaxDrive Power Flip Windshield so you can enjoy any riding condition with the flick of a switch. Our windshields come with everything you need for installation so you can spend more time on the trail and less time at the hardware store. The actuators are super tough to handle even the roughest rides. There’s not a rut, hole, or hurdle out there that’ll rock your RZR enough to make these actuators give out. Everything is made for a precise fit so you get a rattle-free ride too. We paid attention to every little detail so you get maximum performance
Ready to get yours? Visit superatv.com...
www.superatv.com/polaris-rzr-...
0:00 Intro
0:28 List of tools needed
0:35 Remove the center storage box
1:50 Feed the rocker switch wiring into the rocker switch hole
3:50 Trim the extra wiring
4:55 Strip the wire on the pulse plug adapter
5:55 Choose a connector from the kit
7:52 Plug the wiring harness into an empty plug
8:48 Feed mechanic’s wire through the plug
10:26 Start hardware on the passenger-side brackets
11:40 Install the clamps to the cage
12:09 Apply the straight seal
13:25 Apply the 90-degree bulb seal
14:44 Mount the windshield to the clamps
16:59 Install the actuators
18:38 Connect the actuators
21:08 Secure the excess wire with zip ties
Негізгі бет Тәжірибелік нұсқаулар және стиль How to Install SuperATV's MaxDrive Power Flip Windshield for the Polaris RZR PRO R 4
Пікірлер: 4