Protip: If you can’t get the trigger assembly back in you likely tightened the pistol grip too much. Back it off a turn and try again. Worked great for me.
@FloridaMan762
Ай бұрын
good info 👍
@alanaguilar4661
8 ай бұрын
Straight to the point, thank you. This was very helpful.
@Lobster_Tube
4 ай бұрын
You made my Friday a lot better amigo
@FloridaMan762
4 ай бұрын
de nada
@WoLF-xp3cy
Ай бұрын
I have noticed that there are tiny holes on both sides of the pistol grip so is it possible to use them for installing a QD point ? Do you know how to ?
@FloridaMan762
Ай бұрын
no way to install qd points
@funnythirty
9 ай бұрын
That’s awesome info. I really don’t feel like replacing the tube. I watched a video and it’s a “pretty involved process “ Thanks !!
@MrFlamethrower32
2 ай бұрын
This method sort of works on a panzer m4 as well, just a couple extra steps if you are going from fixed to telescopic
@FloridaMan762
2 ай бұрын
good to know 👍
@stevo5459
8 ай бұрын
Best video on how to do this.
@FloridaMan762
3 ай бұрын
Thank you
@blindluck48
8 күн бұрын
Thank you b
@qjames0077
11 ай бұрын
Out of curiosity...do you know if this stock, including the recoil tube works on a Stoeger M3000? I love this stock, and i love the Stoeger, and i was hoping since the two are almost identical if there was cross compatibility
@kevincabral5787
9 ай бұрын
Just wondering, does your stock have side to side wiggle when it's locked into position? Mine does, not sure if this is normal. Also, when you smack the butt of the stock to your shoulder, as if you're firing the shotgun, do you hear a thud sound. I do with mine, and have no idea what it is. I'm new to firearms so all this is new to me lol.
@FloridaMan762
Ай бұрын
its not rock solid, it has a little bit of play but minor and doesn't affect anything negatively. no thud sound
@lynnmartin5579
7 ай бұрын
Hello, thank you for the great video. Do all the M4's come with the 3 position tube? My M4 came with the pistol grip standard stock (not collapsible). I want to order a collapsible stock but wonder if I need to disassemble my M4 & see if it has the 3 position tube or if all come standard with it. Thank you.
@FloridaMan762
7 ай бұрын
most benelli m4 have the 3 postition tube already installed even with the fixed stock. the only model i'm aware that only has the 1 position tube is the american flag m1014 commemorative benelli m4
@tajjacobi203
Жыл бұрын
Awesome video man!
@FloridaMan762
Жыл бұрын
thanks man
@RickP1030
6 ай бұрын
Excellent
@funnythirty
9 ай бұрын
So I purchased the collapsible stock from Benelli…but they insisted I buy the 2-3 position tube. In your video, you a;ready had the tube. Can you explain ?
@FloridaMan762
9 ай бұрын
most benelli will already having the correct 3 position tube already installed, the only exception i'm aware of is the m1014 commemorative edition that has the fixed 1 position collapsing stock
@J-nasty
Жыл бұрын
where did you purchase the collapsible stock from?
@FloridaMan762
Жыл бұрын
this was a factory benelli LE model that came with a collapsing stock, you could buy it from places like midwest gun parts or secondhand from ebay gunbroker
@ReinaldoRobledo
Ай бұрын
How do you hold the hand guard without it moving
@FloridaMan762
Ай бұрын
its locked in place
@ReinaldoRobledo
Ай бұрын
@@FloridaMan762 for some reason mines rattles and now i cant get the trigger back in. I am at the point to hire some one to fix it
@FloridaMan762
Ай бұрын
@@ReinaldoRobledo I have a video on the install of the midwest m4 handguard on my channel it may help
@TheDwchan
4 ай бұрын
Does the non-collapsible stock come with the rod that has the three position notch already? or is that an additional component?
@FloridaMan762
4 ай бұрын
The 3 position recoil tube should already be installed on your Benelli. If can also be bought separately if needed, the collapsing stock does not include the recoil tube
@mikec082
3 ай бұрын
Good vid
@FloridaMan762
3 ай бұрын
👍
@senpaipede2586
11 ай бұрын
Is that the Agency Arms forend? How much does that forend weigh approximately? I had the mesa tactically tuckee forend on mine and the weight it added was ridiculous.
@senpaipede2586
11 ай бұрын
Cancel that sir! I checked out your channel and found the answers!
@FloridaMan762
9 ай бұрын
@@senpaipede2586 sorry for the delay, its the midwest industeries benelli m4 rail system
@skyeterrance
2 ай бұрын
What side saddle is that sir?
@FloridaMan762
2 ай бұрын
the mesa tactical 8 round side saddle, I recommend it
@ajlukelepuke
11 ай бұрын
It looks like you have a 2 round extension instead of the 7 round mag tube. Is it possible to remove the barrel with the 2rd extension installed?
@FloridaMan762
11 ай бұрын
yep, it is the 2 round factory extension, it can be removed for example if I used the 14" barrel all I do is unscrew the 2 round extension and use the existing magazine tube now
@ajlukelepuke
11 ай бұрын
@@FloridaMan762 thanks
@omarj5264
2 ай бұрын
Sweet!!!
@FloridaMan762
2 ай бұрын
👍
@SOSdoorgunner69
11 ай бұрын
will the Panzer M4 kit work on the Panzer. I know you said that was a bennelli., but I was told that the Panzer M4 kit will work if the buffer has the three knotches.
@FloridaMan762
11 ай бұрын
not sure if it'd fit or not if its made to the same standard, then it would
@whopper5150209
4 ай бұрын
@@FloridaMan762 yes if you purchase the stock from panzer and you have a new model panzer m4 with the 3 notch tube from the factory it will install just like this. If you have the solid stock you will need to remove the buttpad and big Allen bolt.
@ap7655
6 ай бұрын
Which stock do you like the best?
@FloridaMan762
6 ай бұрын
I didn't like the fixed stock since, running a low height micro red dot sight, the comb height was way too low, I'm using the collapsing stock and its going well
@sahilralh7172
3 ай бұрын
@@FloridaMan762where did you get the collapsible stock from ?
@FloridaMan762
3 ай бұрын
@@sahilralh7172 places like midwest gun parts or gunbroker
Пікірлер: 52