Welcome back to the channel! In today’s tutorial, we’re diving into an exciting upgrade for your Venom X22GT 250cc Automatic Motorcycle. We’ll be showing you step-by-step how to remove the stock air box and install a Nibbi Cold Air Intake. This modification will not only improve your bike's performance but also give it a sleek, custom look.
🔧 Tools and Materials Needed:
Screwdrivers (Phillips and flathead)
Ratchet set
Pliers
Nibbi Cold Air Intake kit
Clean cloth
📋 Step-by-Step Guide:
1. Preparation
Safety First: Ensure your motorcycle is on a stable surface and turned off. Disconnect the battery for safety.
Gather Tools: Have all your tools and the Nibbi Cold Air Intake kit ready.
2. Removing the Stock Air Box
Locate the Air Box: The stock air box is usually found under the seat or side panels.
Remove the Seat/Panels: Use your screwdriver and ratchet to remove any bolts or screws securing the seat or panels covering the air box.
Disconnect Air Box: Carefully disconnect any hoses or clamps attached to the air box.
Unbolt the Air Box: Use the ratchet to remove the bolts holding the air box in place.
Remove the Air Box: Once everything is disconnected, gently pull the air box out.
3. Installing the Nibbi Cold Air Intake
Prepare the Intake: Unbox the Nibbi Cold Air Intake and lay out all the components.
Attach the Intake: Position the Nibbi Cold Air Intake where the stock air box was removed. Secure it with the provided clamps and bolts.
Connect Hoses: Reconnect any hoses that were attached to the stock air box, ensuring a snug fit.
Secure the Intake: Double-check all connections and bolts to ensure the intake is securely in place.
4. Final Checks
Reinstall Panels/Seat: Reattach any panels or the seat that you removed earlier.
Reconnect the Battery: Safely reconnect the battery.
Test the Bike: Start your motorcycle and listen for any unusual sounds. Ensure the engine runs smoothly with the new intake.
🚀 Benefits of the Nibbi Cold Air Intake
Improved airflow and engine performance
Enhanced throttle response
A sleek, custom look
If you enjoyed this tutorial, please give it a thumbs up and subscribe to our channel for more DIY motorcycle upgrades and maintenance tips. Don't forget to hit the bell icon to get notified of our latest videos!
Thanks for watching and ride safe!
#VenomX22GT #NibbiIntake #MotorcycleMods #DIYMotorcycle #MotorcyclePerformance #BikeLife #VenomX22GTMods #MotorcycleUpgrades #ColdAirIntake #motorcyclemaintenance
www.venommotorsportsusa.com/p...
Негізгі бет How to Install the Nibbi Cold Air Intake on Your Venom x22GT 250cc Automatic Motorcycle
Пікірлер