ORDER YOURS HERE: projectxoffroad.com/products/...
In this video you will learn how to assemble the SERIES X HP.70 lights onto the PROJECT X modular bumper bracket and install the system on your 2021+Ford Bronco or Bronco Raptor.
Recommended Tools:
TORX-40IP drive (Included in Glove Compartment Bronco Tool Kit)
Cordless Impact or Socket Wrench
Extension (optional)
15mm Socket
Panel popper
Safety Torx - Large (included)
Safety Torx - Small (included)
Flush Cuts
Zip Ties for Harness
0:00 Step One - Unboxing and mounting the HP.70s to the bracket
2:15 Step Two - Remove plastic caps from the modular bumper
4:05 Step Three - Remove the 6 bumper bolts and remove the bumper
5:14 Step Four - Use the factory hardware to install the assembled mount
7:51 Step Five - Installing the 2 PROJECT X harnesses
10:43 Step Six - Reinstall the Modular Bumper
11:18 - Step Seven - (optional) Wire to your PROJECT X Ghost Box modules
15:47 - Outro
Bolt-on Design - Installing the SERIES X HP.70 bumper bracket couldn't be simpler. Our bolt-on design utilizes factory threaded holes in the OEM modular front bumper.
4-Light Pattern - This bracket allows you to seamlessly mount four SERIES X HP.70s to your stock modular bumper. The four light pattern is perfectly centered on your Bronco's front end, giving you classic looks and plenty of forward light.
Vertical Adjustability - Aim your beams according to your lift. Whether you're stock height, front rake, or rear rake, this bracket allows for vertical adjustability of each HP.70 light to keep them pointed where you need them most.
Ghost Box Ready - This bracket comes ready to install in tandem with the PROJECT X Ghost Box Wireless Accessory system, taking all the guesswork and hassle out of wiring your new lights.
-
Learn more at: projectxoffroad.com/
Follow us on Instagram: @ PROJECTXOFFROAD
Негізгі бет Автокөліктер мен көлік құралдары HOW TO: Install the SERIES X HP.70 Modular Bumper Bracket for your 2021+ Ford Bronco
Пікірлер