At $180 this is a no go. Thans to this vudeo, I'll just make my own. Looks like a simple design. 👍
@ReggieSamuel
2 жыл бұрын
I subscribed and I’m waiting for you to design a bracket for Rykers without the back rest. Great channel!
@broderp
Жыл бұрын
Still waiting? Lol
@ReggieSamuel
Жыл бұрын
@@broderp I sold it
@mrfingers00100
Жыл бұрын
I bought your rack and love it compared to known competitors. Love your install video
@kirwinprovidence3225
Жыл бұрын
Thank you… I’m happy it worked out for you. Please send a text to the phone number that came with the installation instruction. I would love to see and highlight your bike and one of my videos.
@michellemacdonald7487
2 жыл бұрын
Judy just bought 2. Excited to get them installed!!
@Daniel_Size_12
Жыл бұрын
I like your rack mount. Can Am now comes out with a monster rack for 169.00, but it looks huge.
@joncherokee
3 жыл бұрын
I'm biting at the bit for your second version to come out without attaching to the back rest. (cause I have no back rest, only max mount and passenger seat)
@HeyBIGhead-
3 жыл бұрын
Great product and video... keep up the good job!
@Djhoodrich.
2 жыл бұрын
Great product keep up the good Work👍🏾
@kiwiryker
3 жыл бұрын
Hi I don’t have rear back rest no point , I have no friends lol , I do have max Mount and rear seat Mount came with bike . I’ll,wait for your next version that doesn’t require back rest.
@davytrevino3013
2 жыл бұрын
Just ordered one
@grampsaggyballs
3 жыл бұрын
You got me sold. Just signed up. That would be awesome if it was to ship out on September 1st. I am going to Trikefest September 17-19th. Would love to show it off and maybe get some sales for you. Maybe in my order, throw in a few business cards to hand out for this product.
@kirwinprovidence3225
3 жыл бұрын
I see no indication to delay getting it out to you on time. Thanks for the offer. Will keep you updated.
@randycosta1027
6 ай бұрын
I have a 2023 can am Ryker Ralley how and where do I pay this bracket where I don’t have to take off my passenger seat and back rest?
@kirwinprovidence3225
6 ай бұрын
You need both the passenger seat and the folding backrest for this rack to work www.providence-spyder-accessories.com/product-page/ryker-luggage-rack
@jeancomeau8032
Жыл бұрын
Hi! Great looking rack! Can I install this rack on a Ryker without the passenger seat? Thanks.
@jeancomeau8032
Жыл бұрын
Ok I got my answer by looking at the notice on your web site. Thanks!
@kirwinprovidence3225
Жыл бұрын
Sorry no you cannot. You need the passenger seat and also the folding back rest. That is the secret to it working correctly and not hitting against your back tire. Good luck
@Coolbreeze61
Жыл бұрын
Oh forgot to ask, need to figure out a way to make my handlebar fold on either side of the mounting bracket, again any suggestions. The reason I need the handlebar to fold is when I put it in my enclosed trailer it’s hard to get around them if I need to
@kirwinprovidence3225
Жыл бұрын
Another million dollar question to which there is no answer. Sorry…The closest thing to which you ask is the rotating adjustable handlebar option on the original Spyder RT, but they use a center bolting design that won’t fit the Rykers.
@Coolbreeze61
Жыл бұрын
@@kirwinprovidence3225 also sent you an email about this with a picture and see what you think
@mrfingers00100
Жыл бұрын
Wheres the link to the additional piece you added to the rack? Great video
@kirwinprovidence3225
Жыл бұрын
The special plate comes in the kit at no extra charge. One of the attached links shows the installation and the other link is to the web store. Thanks for watching the video. kzitem.info/news/bejne/mWyIz2GNa5qXdo4 www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@judywitt9938
2 жыл бұрын
Will this work with the short rail backrest or does it have to be the folding backrest?
@kirwinprovidence3225
2 жыл бұрын
You need the folding one
@michellemacdonald7487
2 жыл бұрын
Can't wait for us to get them 😍
@kirwinprovidence3225
2 жыл бұрын
@@michellemacdonald7487 Already shipped Priority Mail. Check your Comcast email for tracking. They should hit your "Strawberry P" in less than 3 days. Please text pics of the finished installs to the phone number in the box.
@randycosta1027
5 ай бұрын
Where can I buy this bracket I have a 2023 Ryker Rally I would like to install the luggage Wrack?
@kirwinprovidence3225
5 ай бұрын
Here you go… www.providence-spyder-accessories.com/product-page/ryker-luggage-rack
@ernestoaranda717
Жыл бұрын
Do you have something for the 2014 Spyder ST Ltd with the passenger back rest?
@kirwinprovidence3225
Жыл бұрын
No i don’t …sorry
@mckinleyhodges4845
3 жыл бұрын
Any idea how long it will be before you guys add a cross brace so we can add saddlebags? Already pre-ordered.
@nathanrogers4348
2 жыл бұрын
I want to order the rack for the luggage case but I don’t know how to link up
@kirwinprovidence3225
2 жыл бұрын
You can buy the rack here www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@dadtrap
10 ай бұрын
So you need the backrest to put the mounting bracket on? Makes it useless
@dadtrap
10 ай бұрын
Be honest about the cost. It will do you well in the end
@kirwinprovidence3225
10 ай бұрын
You need a secure mounting point for safety. The only 2 secure mounting points are the folding backrest or the subframe. If you mount to the subframe you need a “flying bracket” to avoid the assembly hitting the back tire. That’s why Can-Am has an asymmetrical (only one) saddlebag option. The back rest is designed to support a minimum of 3x the passenger torso weight at highway speeds which also factors for lateral impact. The bike is purposely designed to take your money via the Link Mounting System which forces you to buy multiple accessories and change them out for different occasions. ALL other aftermarket racks and saddle bags mount via the 6mm mudflap holes that are NOT designed to support additional weight and they ALL bottom out against the back tire when you hit a pot hole. As for the price, we give you Laser-cut 100% 304 stainless steel with an industrial powder-coat for the same price or less than all competitors that only use regular metal or aluminum. Good luck with your accessories purchase and SAFE riding.@@dadtrap
@NFLHITMAN
2 жыл бұрын
I have the ultimate seat. Do you a design for a rack without the OEM backrest?
@kirwinprovidence3225
2 жыл бұрын
No. The folding backrest is the safest way to mount the luggage rack. Without it you need a support beam under the seat. Every time you hit a pothole hole you’ll slam against the bottom of your seat. That’s how all of the other set ups work. My setup is the safest way to avoid that problem. So you need the folding backrest
@NFLHITMAN
2 жыл бұрын
@@kirwinprovidence3225 I like your setup but I have to get the Ultimate seat so I sit higher to let my legs stretch out more because as of right now long rides suck. I have a stage 4 Elka rear shock so I don't have a problem with bottoming out but I thank you for the reply.
@cindollbuttice1042
Жыл бұрын
How do I get one of these brackets. Will you ship to Canada
@kirwinprovidence3225
Жыл бұрын
We shipped to Canada almost every day. So no problem getting you one. They are back in stock. Here is the link to buy one providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@chosen7000
2 жыл бұрын
Can you use a small tail bag like a nelson Rigg
@kirwinprovidence3225
2 жыл бұрын
This is a flat and level stainless steel platform. We have mounted many different luggage types. Some required us to drill a hole to accommodate whatever unique brackets. I see no reason why you should not be able to mount Nelson Rig. I have not tried one myself
@chosen7000
2 жыл бұрын
Ok thanks
@Coolbreeze61
Жыл бұрын
Just bought a 2019 and need to increase front ground clearance by at least 2 to 3 inches, have any suggestions
@kirwinprovidence3225
Жыл бұрын
Personally I have not heard of a lift kit for the CanAM motorcycles. That could be cool though bc it’s hard to get some of the Spyders onto a trailer without a pre-ramp. Good luck!
@Coolbreeze61
Жыл бұрын
@@kirwinprovidence3225 do you think a shock extension could work?
@kirwinprovidence3225
Жыл бұрын
@@Coolbreeze61 I would be concerned of it lowering the muffler too close to the ground. It would be more clearance in the front but less in the back. The bike was designed low to the ground to lower the center of gravity for drifting. The rear spring is more horizontal then vertical so I don’t see how you can lift the back. Lifting only the front would put the bike on an angle…. At least that’s what I think. Good luck.
If you are talking about the Ryker luggage rack, then here is the link to buy one. www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@nathanrogers4348
2 жыл бұрын
Where do I go to order the luggage rack but a Can-Am Ryker
So I have a 2021 Ryker but I've replace the factory passenger seat and Backrest with the Ultimate Seat. Any solution for adding a luggage rack with that setup? Would love something that works like yours but no longer have that stock flip up and down backrest. Thanks
@kirwinprovidence3225
2 жыл бұрын
Unfortunately no. I do not have a solution for the ultimate seat set up. Good luck. Thanks for watching the vid.
How do I link up to the link because I don’t see nothing on the bottom it said link up
@kirwinprovidence3225
2 жыл бұрын
Also see this video for a medium-quality helmet case kzitem.info/news/bejne/lI2HvGZppmmLmaw
@kirwinprovidence3225
2 жыл бұрын
You can buy the rack here: www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US.
@giovannam925
2 жыл бұрын
this luggage system holder you have is it only for the one up seat? and do you have to have the max mount? I was thinking of upgrading my seat to that new sporty looking single seat, but I realized I would lose access to having a maxmount, urggh.
@kirwinprovidence3225
2 жыл бұрын
You need the passenger seat and the passenger folding back rest. That is the safest and most accurate way to install an aftermarket luggage rack and helmet case. The Cushion itself can be the fancy one but you need the passenger seat and the passenger folding luggage rack.
@petrkarv
2 жыл бұрын
Hi, Can you take the seat off the bike with the bracket attached?
@kirwinprovidence3225
2 жыл бұрын
Remove the two lower Bolts only and then you can flip the luggage rack up and remove and return the passenger seat to the Max Mount
@Frank-vo9xo
Жыл бұрын
How do you install if you don't have a seat everyone I see they come up with these systems to put a backrack on you have to have a back seat don't they make a rack that you don't need a back seat
@kirwinprovidence3225
Жыл бұрын
CanAM already has a rack system for the bike without a passenger seat. They do not have a rack to add with a passenger seat. Its one or the other with CanAM. My system lets you have both.
@patrickmalo4045
2 жыл бұрын
Nice ,,, today ,, how much you sale the bracket with the lugage?
@kirwinprovidence3225
2 жыл бұрын
Here is the link to buy the luggage rack. Will send another link for the helmet case providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@kirwinprovidence3225
2 жыл бұрын
Here is link for helmet case www.amazon.com/Comie-Motorcycle-Luggage-Storage-backrest/dp/B07XYKH8CC/ref=dp_fod_3?pd_rd_i=B07XYKH8CC&th=1#
@ronacton4171
2 жыл бұрын
Do you ship to Australia? Cool way to carry more.
@kirwinprovidence3225
2 жыл бұрын
Yes. They are custom made. You can request one be made for you using this link providence-spyder-accessories.com/ryker-luggage-rack
@kirwinprovidence3225
2 жыл бұрын
There is flat rate international shipping. See the link I sent
@budredden818
2 жыл бұрын
How do I get one?
@kirwinprovidence3225
2 жыл бұрын
See this link below. I will also send a video link for a helmet case next providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@kirwinprovidence3225
2 жыл бұрын
See this video for a decent case kzitem.info/news/bejne/lI2HvGZppmmLmaw
@joelgerber3083
2 жыл бұрын
You don't say how to get that rack for the trunk
@kirwinprovidence3225
2 жыл бұрын
Here is the link providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@kirwinprovidence3225
2 жыл бұрын
See here for how to add an $80 helmet case kzitem.info/news/bejne/lI2HvGZppmmLmaw
@jaylan73
2 жыл бұрын
Do you have link for luggage case you used
@kirwinprovidence3225
2 жыл бұрын
3 links below. First one is to my web page to buy the rack. The other 2 links will take you Amazon. I have installed both Amazon cases. My Luggage Rack has pre drilled holes for Amazon option #2 luggage case. You can drill holes to attach most any other case you find (Walmart, eBay, Amazon, ect…) Let me know via email (pvdparts@gmail.com) if any of the links don’t work and I will email the links back to you. My web store: WEB STORE (providence-spyder-accessories.com) Amazon Luggage Case Option #1 www.amazon.com/gp/product/B06XPZXMLJ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1 Amazon Luggage Case Option #2 www.amazon.com/gp/product/B07GZLBPNM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@kirwinprovidence3225
2 жыл бұрын
providence-spyder-accessories.com/apps/webstore
@user-qw7mf9ep1q
3 жыл бұрын
Do u have to have the backrest to use this rack
@kirwinprovidence3225
3 жыл бұрын
Yes. But we are working on other concepts. Right now this is the best anchor point for weight and safety. Thanks for watching the video. Please consider subscribing to support the channel. Be well.
@chuckhall8749
3 жыл бұрын
I don’t have the 2up seat. Looks like a great use product though. If I had the setup and needed extra storage I’d entertain this product.
@kirwinprovidence3225
3 жыл бұрын
@@chuckhall8749 No worries. Be well...
2 жыл бұрын
Hallo. Ist es möglich, dieses komplette Set (Halterung und Topcase) bei Ihnen zu kaufen und nach Deutschland zu versenden? Grüße Robert.
@kirwinprovidence3225
2 жыл бұрын
Ihre Versandkosten werden zu hoch sein. Ihr Preis wird geringer sein, wenn Sie die Gepäckablage bei uns kaufen. Dann kaufen Sie einen Helmkoffer bei Amazon. Zum Beispiel kostet die Comie 48L Helmtasche bei Amazon $ 78 USD mit kostenlosem Versand. Überprüfen Sie Ihren Amazon-Preis in Deutschland. Wenn ich das an Sie versende, kostet es Sie allein im Versand weit über $ 100 USD. Hier ist der Link zum Kauf von Gepäckablage: WEB STORE (providence-spyder-accessories.com). Lassen Sie es mich wissen, wenn Sie Probleme bei der Bestellung haben. providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@danseropian9241
3 жыл бұрын
Can you send me the link to order the luggage rack? Please
@kirwinprovidence3225
3 жыл бұрын
Here is for Luggage Rack providence-spyder-accessories.com/pre-order-universal-luggage-rack
@danseropian9241
3 жыл бұрын
@@kirwinprovidence3225 thanks I put in my info
@danseropian9241
3 жыл бұрын
@@kirwinprovidence3225 can you come up with a floor board design for the passenger pegs?
Пікірлер: 96