Thank you. Your demonstration was very helpful, especially putting in the sealant.
@nyynkees23
4 күн бұрын
Great video! Will help with my Newport boat.
@vickim3136
2 ай бұрын
Extremely helpful, appreciate you taking the time to share information that made installation much easier, since the included SO CALLED instructions are a complete JOKE. Again, thank you sir for your efforts and time.
@teammahaldotcom4264
2 ай бұрын
Glad I can helped. ☺️
@albuterol71
18 күн бұрын
Thank you for posting!
@braddarcy4529
Жыл бұрын
Very helpful! Finished my wheels yesterday. Can’t wait to try them out. Cheers!
@teammahaldotcom4264
Жыл бұрын
Enjoy. You’ll like it
@refugiopoint
2 жыл бұрын
Nice video, appreciate your taking the time and the person behind the camera! Cheers
@teammahaldotcom4264
2 жыл бұрын
Thank you. More to come. Keep checking on and coming back.
@joedanvers1010
3 жыл бұрын
Very informative. Thank you!
@teammahaldotcom4264
3 жыл бұрын
You’re welcome.
@donw.2715
2 жыл бұрын
Awesome, thank you. Installing a set at present 👍🏻
@teammahaldotcom4264
2 жыл бұрын
Happy to hear that. Enjoy ☺️
@jeffcee9457
2 жыл бұрын
very helpful thanks for sharing
@teammahaldotcom4264
2 жыл бұрын
Welcome.
@brianstevens5016
2 ай бұрын
Thanks good step bye step.
@teammahaldotcom4264
2 ай бұрын
You're welcome!
@PERAHUKARETKELUARGA
Жыл бұрын
Thanks share your video👍
@dingledee2704
2 жыл бұрын
Great thank you!
@teammahaldotcom4264
2 жыл бұрын
You’re welcome
@user-bf9qj3im7j
Жыл бұрын
Cool, this is helpful, thanks. The only odd thing I see is the placement of the rubber. I would definitely put that on the outside under the braket.
@teammahaldotcom4264
Жыл бұрын
Thanks. Yep that was an error on my part. No worries.
@user-xp6te9ft3j
7 ай бұрын
HEY .. The rubber gasket goes on the outside between the mounting bracket and transom.
@teammahaldotcom4264
7 ай бұрын
Two gaskets were included in this assembly kit. I put one between bracket and transom. The other one I just installed on the other side
@ABHALONEAVENTURA
2 жыл бұрын
parabéns pelo bote gosto bastante forte abraço do brasil.
@thetequilahour9673
2 жыл бұрын
Just subscribed to the channel. I just bought an 11ft Saturn inflatable with a 9.9 Mercury. I'm waiting on my wheels to arrive so I can install them. Thanks for the info.. can you still fold the boat up good with the transom mounts? Also looks like you're in my old stomping grounds, the South Bay... Keep the content coming.
@teammahaldotcom4264
2 жыл бұрын
Congratulations and enjoy!
@deirdrasmith2932
3 жыл бұрын
What Newport vessel model do you have? Thanx for the information
@teammahaldotcom4264
3 жыл бұрын
Dana 8x10
@mylodbrt
3 жыл бұрын
Very nice video thank you! Where did you buy your transom wheels ? And how much does it cost ?
@teammahaldotcom4264
3 жыл бұрын
Thanks for watching. I got it from Newport Vessel for $179
@thatonebeone
3 жыл бұрын
yesh just pull from slow at the dock getting it and bring it to the parking spot not highway use.. thats what i do with mine depending where i dock launch at
@teammahaldotcom4264
3 жыл бұрын
Yes I agree.
@vannigaming2976
Жыл бұрын
Bonjour, sur quel site je pourrais trouver ses roulettes. Merci d’avance pour votre réponse 😜
@teammahaldotcom4264
Жыл бұрын
I bought it from Amazon 😊
@teammahaldotcom4264
Жыл бұрын
a.co/d/hsxSG1i
@gigidigiardinis604
3 жыл бұрын
Thanks Hal, very helpful video. I have the same setup; Newport dinghy and wheels. What size outboard are you mounting on it? I am going to space my wheels as far apart as I can in order to have room for the motor.
@teammahaldotcom4264
3 жыл бұрын
Thanks. I mounted a Honda 9.9 hp. I took the wheels off after I got it in the water. It limited my movement.
@gigidigiardinis604
3 жыл бұрын
@@teammahaldotcom4264 I got a Tohastu 15hp. I will probably have to remove the wheels as well. Thanks for the reply.
@teammahaldotcom4264
2 жыл бұрын
@@gigidigiardinis604 15hp wow, that’s powerful for that dinghy. They recommend the 9.9, however if the 15 is not over powering it, go for it.
@daricisz73
2 жыл бұрын
what is diameter of wheels ? Please let me know
@teammahaldotcom4264
2 жыл бұрын
About 12 and half inches
@GlobalDesignHD
2 жыл бұрын
But if you want to fold the boat up for storage its gonna be huge right?
@teammahaldotcom4264
2 жыл бұрын
Not huge, to be honest.
@GlobalDesignHD
2 жыл бұрын
@@teammahaldotcom4264 Thanks for the reply bro. I've installed a pair of wheels today. Altho I'm pretty sure you made a mistake. I've had kind of the same setup with instructions and it stated clearly that the rubber mat/seal has to go on the outside of the boat between the mirror and the wheels. Not on the inside it has absolutely no function there.
@teammahaldotcom4264
2 жыл бұрын
@@GlobalDesignHD Thanks. Good point, I'll switch mine around.
@teammahaldotcom4264
2 жыл бұрын
@@GlobalDesignHD Yes the thin gasket is between the bracket and the transom.
@takeitlikeawoman
2 жыл бұрын
You're as risk averse as me, which is why you want locking nuts. However, since you're an aircraft mechanic I thought you'd use titanium screws, washers and nuts to save weight!
@teammahaldotcom4264
2 жыл бұрын
316 stainless steel bolts and nuts does well. Weight is not really a factor with this dinghy and a 10 hp engine. It get on plane easily. Nice setup.
@takeitlikeawoman
2 жыл бұрын
@@teammahaldotcom4264 I know, I was taking the mickey. I know a couple of aircraft engineers and one of them actually used titanium screws to build a kitchen cabinet! 😂
Пікірлер: 53