Cool idea, can def. see how handy of an option this would be. Probably best to just hand tighten with a screwdriver.
@corkyvanderhaven3391
2 жыл бұрын
Hey saw your AZ plate Just got a lil floater Foresee: hours of watching your videos Many, more than once 🌵🧀🐠
@mattharding586
4 жыл бұрын
I found they make ones for threaded drain plug holes. So no need for drilling new holes. I just ordered one, I’m excited to see how bright it is!
@doittoday1
3 жыл бұрын
How did the drain plug lights work out?
@twelvetwenty-two353
3 жыл бұрын
That’s pretty awesome. Drilling into the hull makes me nervous though
@SuperRasean
2 жыл бұрын
Get a Stern saver or Stern pad and mount the lights to that instead, no drilling in the hull needed
@twelvetwenty-two353
2 жыл бұрын
@@SuperRasean how is the stern saver or pad attached to the stern/hull? Glue or epoxy?
@SuperRasean
2 жыл бұрын
@@twelvetwenty-two353 yeah one has like a high strength 3m adhesive pad attached to the back of it the other uses an epoxy, look up some videos on here you'll see both and they both work very well.
@Behind_the_Lens_Photo
Жыл бұрын
nicely done an great walkthrough but i still wouldnt be drilling through my hull of my boat use a 2 part waterproof epoxy based. that will hold againist the pressure of any wake
@williammaguire5628
4 жыл бұрын
Everything looks amazing. Been watching your videos for a couple Years and I just relived your generation are like car generation they keep advancing
@gangsta19x
4 жыл бұрын
Looks dope. Thanks for the vid
@wmkess
4 жыл бұрын
I’m about to order one to try. I’m mounting a 12” piece of hdpe with 5200 to support my transducer and using spare room beside it for this. My question is are these bright enough to attract baitfish like the submersible ones?
@Nick-hv5tt
4 ай бұрын
I would of marked the holes then drill then used silicone around the holes and the housing of the light but that's just me
@FishingWithHoang
4 жыл бұрын
Or you can use 3M 5200 to install them without drilling holes. Thats how I installed my transducer block.
@FishingWithHoang
4 жыл бұрын
@@TinyBoatNation Ahhh thats a bummer. Like a frame that clips over the led light housing itself right?
@YankURCrank
4 жыл бұрын
Those lights look great. Do you have any problem seeing early with those deck leds ?
@christianlatuso4616
3 жыл бұрын
If that screw strippes out the aluminum you aren’t screwed…
@pipolebnene
4 жыл бұрын
I just bought a 1980 fjord 21 dc its a small inboarder boat and i want to get underwater lights. Since it was all speeded up and i have no idea about any DIY jobs, i just drill holes and the light will seal by itself no need for any sealing around the lights and i need to connect the wires to where? Battery or what?
@catherineharris4746
3 жыл бұрын
Nice!👍👍👍👍
@masonstegman8553
4 жыл бұрын
Would you ever sell tht boat? Definitely would wanna get in line for it
@mojondro
4 жыл бұрын
Man that boat with a small center console going to look sick bro, with the small turning wheel and a front seat
@deltapromasterlauj4848
3 жыл бұрын
I didn’t see any inline fuse being installed or is it even needed for the leds? Did I miss something? Thanks
@NeverEnoughPyro40
3 жыл бұрын
You should always use a fuse!
@IrwanHidayat-ye5dd
10 ай бұрын
Cek harga boss 🙏
@anthonyguada
2 жыл бұрын
I would have use GROOVE LED Light's myself ( waterproof of course ) IP68 indicates that the level of waterproofing is higher and that you can immerse it in water for a long time.
@thebowtiefisherman5718
2 жыл бұрын
Hey Anthony, where can I locate this GROOVE LED Lights?
@aidanmurray11
3 жыл бұрын
Great video, one question though, how did you connect the two lights together to go to one switch?
@rski1036
Жыл бұрын
O gee, if you had to ask such a basic question as that you're best to hire a pro.
@brandolino55
8 күн бұрын
together
@NoEscapeOutdoors
3 жыл бұрын
How's the longevity of the lights?
@NoEscapeOutdoors
3 жыл бұрын
@@TinyBoatNation awesome, very good to hear. This is such an awesome channel, you have so much help and knowledge packed into it it is crazy. I've got a 1987 Grumman TC that I'm doing a restomod on and by the looks I got all the info I need from you guys lol
@vb9300
Жыл бұрын
Well, its been 2 years, how those lights holding up? Alot bad reviews on these lights, plenty of them leaking or burning out. Id like to get them but coming to you for the review after 2 years.
@TinyBoatNation
Жыл бұрын
One went down and I had to replace it, but it was cheap. They’re really good value for the money.
@vb9300
Жыл бұрын
@@TinyBoatNation thank you for the honest input, did it flood out or burn out?
@juledoren
2 жыл бұрын
Nah ill weld brackets on instead of drilling holes
@TinyBoatNation
2 жыл бұрын
Good call
@DynoDieselWagon
3 жыл бұрын
I can see it now , people driving them home and crushing the lense .....NEVER use a power tool with intricate products
@jestes7
3 жыл бұрын
how are the bugs?
@jestes7
3 жыл бұрын
@@TinyBoatNation nice
@AlOdd123
4 жыл бұрын
Bad ass Mike! It just keeps getting better!
@randyosborn284
3 жыл бұрын
Nervous about drilling holes below the water line. Looking for leds that can be epoxied
@cbausch7025
3 жыл бұрын
Thinking about putting them on my 14’ aluminum boat . I have a aluminum transom without wood backing now can I rivet them on?
@dreunmason8315
Жыл бұрын
It works good. Brought fish and shrimp up to the docks. Kids had a blast
@fishingismydrug1
4 жыл бұрын
Which video did you talk about the flooring? The EVA faux flooring
@zizwehunt1872
2 жыл бұрын
No unnecessary holes in my boat.
@Schepshiesty
4 жыл бұрын
Hey, what should I use for the inside of my bass tracker 14 foot boat for led’s
@blang1
Жыл бұрын
Are these legal? I know some states don’t allow lights other than the nav and anchor lights.
@gregorybatiste2975
5 ай бұрын
As long as your navigation light and stern light is on while running
@jacobwhite4306
2 жыл бұрын
What length is that boat
@captainsmate5770
2 жыл бұрын
Hand tighten is best
@VictorLopez-pj3pi
2 жыл бұрын
Nice..!!!👍🏼🔥🔥🔥
@msuee96
4 жыл бұрын
The reviews for these lights are horrid. 29% have 1 star with lots of complaints. I don’t mind paying more if the quality is there.
@msuee96
4 жыл бұрын
Hope you’ll update if you have problems. I really wanted to add this to my 1542. I do a lot of night boating.
@keithzastrow
3 жыл бұрын
Wonder how many issues were due to poor installation.
2 жыл бұрын
Will my boat sink if I do it myself? :D
@TinyBoatNation
2 жыл бұрын
Maybe!
@keithzastrow
3 жыл бұрын
Actually seriously thinking about purchasing their 25' pontoon boat lighting for the sides.
Пікірлер: 60