Probably the best thing you can do cosmetically to the cobra
@marlostanfield1087
6 жыл бұрын
Subbed! Been seeing your vids pop up on my feed lately and I’m hooked! Just got my 10th anniversary Termi last week and I’m in love! Keep up the vids!
@dannyjohnsonsgarage
6 жыл бұрын
Marlo Stanfield Very nice! I love the 10ths. My only two options I was considering we’re the screaming yellow and 10th when I was looking. A lot of the 10ths came with the 9 thread heads as well since they were the last built for 2003 🙌🏼
@revengeoftheseth
11 жыл бұрын
Nice video! I was skeptical when I found out that you apply the sticker on the spot wet by windex. Now I see how it is helpful. Definitely will do this method when my inserts come in for my GT
@dannyjohnsonsgarage
11 жыл бұрын
Yeah, I was also not sure about the process when I heard about it at first. Other instructions say to use a small amount of dish soap, but windex works better from my experience.
@dannyjohnsonsgarage
10 жыл бұрын
Plan to spend about three days or so depending on how much help you have. Thanks for the comments guys.
@charliesgarageusa4986
Жыл бұрын
Will soapy water work too?
@dannyjohnsonsgarage
11 жыл бұрын
Removal can be done by applying warm air from a hair dryer/ heat gun to loosen up the glue. ***Don't melt your bumper or date your paint!!***
@57YANKEE57
10 жыл бұрын
Hey man, I have a '01 cobra in zinc yellow as well. The license plate on the wall is just a few number away from the one I have. Great car, lots of fun!
@dannyjohnsonsgarage
10 жыл бұрын
Wow! That Lisence plate was from my 1997 V6 Mustang. My first car.
@WoodlandWest92Joker
10 жыл бұрын
Thanks for the video got my "mustang" inserts coming tomorrow and this helped alot
@dannyjohnsonsgarage
10 жыл бұрын
Glad it helped. Hope your install goes well
@dannyjohnsonsgarage
11 жыл бұрын
The wideband is great, but I haven't hooked up the boost gauge or any of the other functions yet
@KyleSVT
10 жыл бұрын
Thanks for the video watched this before I put them in my 03 cobra
@justin.c_svt
5 жыл бұрын
I'd like to do carbon fiber print ones on my 10th anniversary cobra to keep with the theme
@dannyjohnsonsgarage
5 жыл бұрын
Justin Johnson that would look nice 🙌🏼
@abellopez2885
5 жыл бұрын
How did the carbon fiber print come out?
@mike22810
6 жыл бұрын
Wouldn't soapy water work as well?
@dannyjohnsonsgarage
6 жыл бұрын
mike22810 Yes, soapy water also works. I had heard soap has more bubbles and is harder to work them all out
@JustSynxy
2 жыл бұрын
Where’d you get the decals?
@frankieolivieri841
11 жыл бұрын
Super nice job and the car looks incredible! Hahahaha.... I wish I had your patience hows that AEM Gauge working for you? Im looking to get one.
@matthewenriquez8938
2 жыл бұрын
Is the 1999-04 cobra lettering bigger then the 94-98 cobras?
@dannyjohnsonsgarage
2 жыл бұрын
Only on the 2003-2004 Cobra
@matthewenriquez8938
2 жыл бұрын
@@dannyjohnsonsgarage hella deserved sub for still replying to old old videos in a timely manner
@steveo9798
3 жыл бұрын
Danny why don't I think to go to your KZitem first, just ruined two sets because I wasn't happy with placement🤦♂️
@dannyjohnsonsgarage
3 жыл бұрын
It took me 3 attempts on the mach 1 hood decal because of the slope. I eventually got it perfect which gave me some experience for the bumper inserts 😀
@Rgh71fish
2 жыл бұрын
I'm in the same boat. Its bubble city and a stretched 'O' 😅
@m3giorgi
7 жыл бұрын
Hey sir awesome job on the video, I was wondering if you can tell me how tall in inches are the lettes. Thank you so much!
@dannyjohnsonsgarage
7 жыл бұрын
The Silver Drifter I'll have to measure next time I get a chance. The 03/04 cobra is bigger Lettering than 2001 cobra
@m3giorgi
7 жыл бұрын
Scrun Johnson Yessir I was looking to buy for my 03 Cobra but the dimensions were a little different on the sites so that's why I'm asking you, if you still have your car of course. Thank you for your time, I appreciate it!
@marlostanfield1087
5 жыл бұрын
What are your thoughts on the more expensive ($40-$60) stainless steel billet inserts vs the “chrome vinyls” that are typically cheaper. Closer to $20-$30 range? Thanks
@dannyjohnsonsgarage
5 жыл бұрын
Those are also nice but don’t catch any of the corners with a towel (so I hear).
@marlostanfield1087
5 жыл бұрын
Danny Johnson Thanks! I’ve heard of sanding them down a bit prior to installing. Do you know if the windex method would work on those billet style ones as well? I know they use a 3m piece to stick
@dannyjohnsonsgarage
5 жыл бұрын
I would imagine, but you only really need the windex approach to keep bubbles out. If it's a solid stainless piece it should just stick right on without worrying about bubbles at all
@marlostanfield1087
5 жыл бұрын
Danny Johnson Gotcha! My biggest concern is not aligning them correctly and it being too late to correct it once it sticks.
@dannyjohnsonsgarage
5 жыл бұрын
Yeah, windex helps with that but only if you have a way squeegee it out
@nathanhawkins9059
3 жыл бұрын
Hello sir how long did you let the letter dry overnight?
@dannyjohnsonsgarage
3 жыл бұрын
Yeah, I sat with it for awhile afterward to make sure bubbles were all worked out and they were straight.
Пікірлер: 40