Hi great video we used it all day yesterday to install pulsar max with a N1 CT but the app would not recognise the power meter. Could you please tell me if the N1 CT emits a power light to show it works ours had nothing.
@craigchamberlain
Жыл бұрын
Great video Mark. I’ve got the earlier Pulsar Plus and have found it to be pretty good over the last few years. Having recently installed Solar, I’m considering installing a compatible power meter to use eco boost. How quickly does the power output ramp up and down when tracking green energy generation? Also, is there a minimum power level before it will turn on? My Pulsar Plus can be set between 6A and 32A which is what I use to consume PV energy at present but it’s a bit of a pain to manage manually. I’d be interested to hear how well eco boost works in practice. Thanks.
@electrician247
Жыл бұрын
I'm not sure if eco boost works on prior models just to put that out there lol. Outside of that it switches pretty quickly. I'm using it in the not fully green mode and it hardly touches the grid but I think fills in shirt duration black spots in say cloud coverage etc. The full green mode monitors for instant excess and uses it only. Subject to the minimum charge rate of the vehicle etc. Works a charm I have to say. Very impressed.
@craigchamberlain
Жыл бұрын
@@electrician247 eco boost is available on the Pulsar Plus as well although whether it works exactly the same as on the Max is anyone's guess. I already have a Victron hybrid inverter/charger installed which is set to export to the grid when the batteries are full so I do worry a little that the control mechanisms of the inverter and the Wallbox might fight with each other and get into oscillation if you know what I mean. But for the cost of the energy meter and associated cabling etc, it's probably worth a try. I already have Cat 6 cable installed so I'll see if I can pick up a meter. I already have an ET112 meter installed for the Victron inverter so it'd be nice if it could just use the RS485 output from that but I don't expect that'll be possible. Thanks again.
@craigchamberlain
Жыл бұрын
Sorry, I just realised I've been calling it eco boost when it's actually called eco smart...doh!
@electrician247
Жыл бұрын
@craigchamberlain I will be honest that the prior model is beyond my knowledge. But the one I have doesn't draw from the battery bank unless I charge via the over ride button on the app. I believe it works on a 50W export margin to ensure that doesn't happen. Thanks.
@chrislangley2399
5 ай бұрын
Hi Mark, thanks for video, very informative. Do you have a video reviewing this after using it since the installation? I am interested to know if it’s working ok on diverting your excess energy from your PV?
@frankgault7845
Жыл бұрын
Hi Mark, as always a great easy to follow video. on a slightly different subject is there anything in the regs about location of consumer units on a stairwell in a domestic dwelling? I'm concerned primeraly with it being a fire escape. Cheers
@electrician247
Жыл бұрын
Their is if its an escape route. Not necessarily against regs but would advise fire resistant aka steel CU and interlinked smoke alarms
@HawaiiSustainable
9 ай бұрын
Happy 2024, our farm is off-grid. Do you think this wall box would work if connected directly to solar panels?
@GMullerafloat
7 ай бұрын
Just doing lots of research in the electric car field. I consider myself fairly competent, but have moved from a narrow boat to a house. So my question is, how do you know what ground system the house employs?
@electrician247
7 ай бұрын
Look at the main electricity intake. If your not sure beyond that speak to an electrician
@thomasmcdonagh43
Жыл бұрын
Hi Mark, great video, does the pulsar max come with the meter or it an extra? Cannot find info online
@electrician247
Жыл бұрын
You have to order it separately Thomas.
@jeroendebacker8356
3 ай бұрын
Thank you Mark, very helpful, at 15:55 you mention the Power boost "in the right position". For a single unit setup of the Walbox Max without solar and without any smart features, Am I right that all 3 switches should be in the T (terminating) position?
@TheZsenomsky
9 ай бұрын
Hello Mark, thanks foor the video, I just installed A Pulsar plus wit N1 CT just as You. The power meter N1 CT unit lights up red when in use and flashing red when i power it up with 220V . Is that normal? I cannot find any info or documentation about this.
@jamm135
6 ай бұрын
Nice vid. What cable tidy is that. Mine only came with the plug holder and not the extra bit on the top to coil the cable round.
@mtelectrical8068
12 күн бұрын
Can you wire it without the amp meter ?
@edgarsmeets7519
11 ай бұрын
Hi Mark, nice video, thanks. I run into the issue where all the wires are correct, but the 'Upgrades' cannot be accessed. They are greyed out. None of the troubleshooting tips work. Do you have advice?
@electrician247
11 ай бұрын
I have encountered this before and it was the comms cables I had wired in the wrong orientation to the bottom of the meter interface. Switching them around solved the problem. So it’s worth double and triple checking. Outside of that it’s always worked fine.
@edgarsmeets7519
11 ай бұрын
Thanks Mark. I have a different meter, one called EM340 but I shall have my installer look at the wiring of it. @@electrician247
@edgarsmeets7519
10 ай бұрын
I did not get around the issue yet, sadly. Triple checked all wires and connections. On the app, only at two occasions was the 'MID meter' option displayed in green. I entered the SN and the other field there, and hit 'connect'; technical issue was the message, it did not work on either occasion. Now it's back to color grey. I am stuck. @electrician247 can you advise please?
@leecowper1509
9 ай бұрын
Do you recommend this ev charger or can you recommend something else
@electrician247
9 ай бұрын
It’s the one on my house so I hope so 😂
@leecowper1509
9 ай бұрын
What's the ohme pro and project v like compared to the wallbox
@FFT_Electrical
Жыл бұрын
What's your thoughts on installing the power meter in the CU, is it against 510.3 ? , I have often wondered the same about a din rail bell transformer (Ring for example)
@electrician247
Жыл бұрын
So long as they don't sit on the busbar themselves and are rated for all voltages present (along with cabling to them) I have no issue with it. Whichever way its done results in the same circumstance somewhere as its not type tested system in any regard.
@smithia6
8 ай бұрын
Hi Mark, Do you have to install the data cables or can you simply run it using the earth/live/neutral , im still struggling to understand what the PE and the PE2 connection is and how to correctly identify which one to use in the UK
@electrician247
8 ай бұрын
It will work without the smart features and consumption monitoring yes. I’ve used mine since this video and it’s really good at identifying export to charge vehicles etc. so if you have solar it’s worth figuring out.
@rimetea4569
Ай бұрын
can this be connected to fronius smartmeter?
@davidmcclean6043
5 ай бұрын
Could this charger be installed on 4mm cable (existing cabling in my garage) with the current limit set to 5 for 20Amp?
@christian75g
Жыл бұрын
Is it a power cable including cat6 data cabling? I’m in France sorry if obvious to you but I never saw a cable mixing high and low voltage in the same. 10mm2 is the law here for ev chargers, so we use 3G10 cables.
@electrician247
Жыл бұрын
It's called EV ultra. Made by Doncaster cables and Elland procell. The data cabling is rated to 300V and primarily is used for the CT monitoring extensions. 4 can use down to 4mm here on 7kw of circuit route/design allows. Generally people use 6mm. That's for single phase anyway. Hope that helps!
@giliguluedinburgh
Жыл бұрын
Hi Mark, does the data cabling need to be connected to the broadband router?
@electricalservicesmaroc
Жыл бұрын
🎉❤❤
@tommyoxnard9100
5 ай бұрын
Do you need to use the EV Ultra cable or will 6mm armour do?
@electrician247
5 ай бұрын
You will need comms cable for the metering kit. But can be run separate with regular Swa
@giliguluedinburgh
Жыл бұрын
How does the energy supplier know that you are charging your EV so that it will charge you the EV energy rate? I have a smart meter, how do I know if it's compatible with Octopus intelligent?
@electrician247
Жыл бұрын
They don't know. They offer discounted rates on the agile tariff for example at set tines or fixed times on the EV tariffs for refund rates (not as low as agile) for fixed set times. In terms of the meter you need to ask octopus
@rbtx99
11 ай бұрын
20:22 "free charge" - Solar energy is not free. It is costing you the amount you would get from the feed-in tariff. In fact, it is best to sell your solar and charge at night on a low EV tariff.
@electrician247
11 ай бұрын
You say more than you know... As we have battery storage in the house we are on octopus agile. It definitely isn't better to charge overnight... For some on different tariffs perhaps. But as professionals know its all about those unique tariff and usage arrangements. Having the ability to fill a vehicle direct from the sunshine is a massive tool in the box that most consumers would do well to utilise. In my circumstance here even with the feed in payment it is much more cost effective to charge from the sun when it allows. I see it clearly this time of year when it's not an option sadly. Statements like yours would have more weight if you had foresight of everyone's tariff and lifestyle. But you don't.
@rbtx99
7 ай бұрын
24:22 Every tool is a hammer, but power tools are not!
Пікірлер: 50