looks good, and you made it look easy. mine was all crapped up and pain in ass to remove what i already put on since i stopped short
@marv4976
6 жыл бұрын
goo gone or goof off or warm soapy water to get glue residue off any surface, never take a razor blade or any other sharp metal object to a painted surface.
@Brownbrady
9 жыл бұрын
Good quality video man. Mine didn't come with that applicator and had to manually guide it by hand. It took me twice as long to finish it.
@Ewecnt
2 жыл бұрын
To get the surface clean before applying tape I use clay bar. Much safer than a sharp blade and does a better job of removing road film and tar. After the clay bar I use brake cleaner to be sure it’s super clean.
@x-man5056
2 жыл бұрын
He was cutting away rubber glue from wheel weights. Clay bar won't touch it but razor blade is Oh hell no! Tongue depressor or plastic scraper. After you scrape, you still need to use Alcohol anyway. Even if you use clay bar. You must remove ALL oils. Use 90% rubbing alcohol.
@Zx14rrrrrrrrrrr
11 жыл бұрын
You should've lifted up the starting end a little and cut where it starts being straight. It would damn near perfect.
@ExoModdingCrew
8 жыл бұрын
Do you get the thing that applies it with all Rim Tape?
@sobe90210
11 жыл бұрын
It may not be so informative for you, however many others find this helpful.
@genuzz
7 жыл бұрын
A great vid, thank you for uploading, with the particular 'Progrip' just make sure to purchase a proper version otherwise it will just wriggle off and drop away from the rim...
@x-man5056
2 жыл бұрын
That's from poor prep unless the tape you used is old.
@crazeedrummer1
11 жыл бұрын
i like the part where you say that you like to leave the tape roll on the stand because it's easier and it unwraps itself, as you stop every 6 inches and unroll it yourself with your hands lol. seems like more struggle than just putting it on the ground.
@PaulSawyer
8 жыл бұрын
very helpful video, thanks very much for posting
@maxchadwick7714
3 жыл бұрын
Very helpful 👌 Thanks 👍
@413_RYDER
9 жыл бұрын
Wow don't use a razor blade!
@mrdre963
3 жыл бұрын
I like your bike logo. I have the 2016 s1k rr also black.
@danilomijatovic6811
4 жыл бұрын
Can you apply it without that plastic thing?
@Aryan8Pride8
10 жыл бұрын
Bro, it's a lot easier just to leave the tape on the ground.
@keithphillips1234
10 жыл бұрын
Actually easy to have it unrolled and across the room lol In My Opinion. I suppose its best to.. I wasted a roll because it wanted to wrinkle and peel back off. Its sorta a pain to install even with stands. I may have rushed it tho. But +1 to ur input.
@Aryan8Pride8
10 жыл бұрын
lol...well, if you want to take it to that level, then yeah, that's probably the easiest way. Nonetheless, the tape got put on and it looks nice. I guess that's all that matters.
@drhassoon
11 жыл бұрын
Nice video man, would this work for a mountain bike? and how does the tape bend to the curve? I mean is the tape stretchable?
@PMitchell106
6 жыл бұрын
Get some soft plastic razor blades to scrape off the leftover balancer foam tape.
@Antassium
10 жыл бұрын
What happened to " if the tape gets messed up, just pull it back and fix it"? Shotty work....
@DW_Teknos
11 жыл бұрын
When I applicate it....LOL --Gold!!
@Kuagh
9 жыл бұрын
Good Vid. What kind of bike do you have?
@blkluvla
6 жыл бұрын
Tried this using the FX tape applicator and it was pretty much impossible!
@lorisoward
10 жыл бұрын
Great video!!! thanks!
@cbr900rr6
6 жыл бұрын
Good video... Thanks
@julianspaans5802
11 жыл бұрын
the applicator will not fit on your rim, but the tape should work fine.
@hammadali-zq5so
10 жыл бұрын
Where does this pasting device available.. Somebody mail me its online site or indian supplier address
@sukhoiboi4ever655
10 жыл бұрын
Bike bandit
@yudhamica17
11 жыл бұрын
what bike is that?
@kwnstantinamavrochi2703
9 жыл бұрын
thank you :)
@Zx14rrrrrrrrrrr
11 жыл бұрын
Good video tho
@chrisgkaros5836
11 жыл бұрын
ty bro
@x-man5056
2 жыл бұрын
RAZOR BLADE! NO. Wood or plastic scraper only. Seriously.
@markjar
11 жыл бұрын
04 ZX10-R
@darylem6938
10 жыл бұрын
Hey creighty9, Now the vid has 33k and counting views. As you should know only smart people research how to do things before they actually do it. Makes sense right?
@jlcapt2
11 жыл бұрын
U made it look easy. I could do that I think.
@Aryan8Pride8
10 жыл бұрын
I use razor blades to chop up my opana into a very fine powder. Mmmmmmm
@sukhoiboi4ever655
10 жыл бұрын
Lol, that was good!
@CREighty9
11 жыл бұрын
LOL 1000+ views of how to install wheel tape lmao
@ofir20503
5 жыл бұрын
180000 :) some people just really want to make sure they don't mess something as stupid as this up. its like confirming a kill or using the calculator for simple math
@BM-nu6qu
Жыл бұрын
lavoro di 💩....il nastro storto , va un po staccato e tagliato , poi continui con il nastro nell'applicatatore , fino a coprirlo
Пікірлер: 48