🔥 xTool Black Friday Sales & Cyber Monday Sales (ends on Nov 30th PT) 👉 xTool S1 NEW Diode Laser US Store: bit.ly/48RUUO9 ($200 off $2299, CODE: XTCUT200) UK Store: bit.ly/46UVSqV EU Store: bit.ly/46k7VNE I recommend THIS updated 20W xTool Laser Bundle 👇 US: bit.ly/20WBundle UK: bit.ly/xTool-20W-UK EU: bit.ly/xTool-20W-EU 👉 xTool F1 US Store: bit.ly/3uaPs8Y ($150 off $1699, CODE: XTCUT150) UK Store: bit.ly/47BxA5O EU Store: bit.ly/46k7VNE 👉 xTool P2: US Store: bit.ly/47m6H6c ($250 off $2999, CODE: XTCUT250) UK Store: bit.ly/3FY9Woh EU Store: bit.ly/3R2dtZ1
@TBKFACTORY.
6 ай бұрын
dear, are you interested in TBK laser machine? that must be nice
@PhilipCook123
2 ай бұрын
Use masking tape over anything you want to test run. You will have to lower your speed and power but once you get it dialed in just to mark it and not cut through, it works perfectly. I use blue masking tape because the marking turns out better.
@vacation_generation
Жыл бұрын
What a great video with a positive message. I’ve just bought an xTool D1 pro and thought what the heck I’ll get all the accessories! Just working it out now. I must admit, as a total fresher there’s a lot of trial and error required. So appreciate these kinds of instructional and ideas videos.
@melodyk.4612
Жыл бұрын
I'm also new to this. Curious, have you figured out how to center the laser??
@potluckthemovie
Жыл бұрын
I am new to this product and found it exceptionally helpful. I've watched others re: set up of the new unit including the build and you are heads above the rest. You said it's a long video, I find it to be the most informative and I appreciate you covering all the bases.
@karatekaninen3045
2 жыл бұрын
It's a cool gadget and I wouldnt mind it but its things like this that takes out the soul of working with wood - I like when things aren't 100% prefet, when things arent looking the same, when someone put a lot of work and love in it
@rawgage7
10 ай бұрын
Instead of using paint thinner (which is chemically designed to thin oil based paints), you should be using acetone for spray paints where they are ether based. Plus, you wash off the waste into a plastic or metal container, not down your drain where it will pollute your water system (either town water or your water table if you have a leach field).
@Putrid186
22 күн бұрын
to piggyback off this, actually just check with your water authority for drainwater if you have city sewage. Many things actually CAN be drained down your normal city sewage (like antifreeze in most places, holy smokes) but never your leach field (like antifreeze, holy smokes)
@davidrossman7925
Жыл бұрын
Instead of using a masking paint that requires thinner or acetone to remove try using water washable tempera paint. Some people brush it on but I invested less than $100 on a Harbor Freight airbrush compressor/air brush set. Apply the tempera paint, let it dry, engrave your image and wash it off with water. That simple!
@CorneliusCreations
Жыл бұрын
Fantastic advice, Thank you!
@danieller9645
Жыл бұрын
Thank you thank you thank you Matt!!! I have been waiting for this video for two months since I receive my XTool D1 and F1. My software was part of the demo stage and they have definitely upgraded it. I greatly appreciate your video and now I feel more confident. Thank you very much.
@CorneliusCreations
11 ай бұрын
Glad it helped!
@hananshaltaf6381
7 ай бұрын
Hi my name is hana,trying to buy and be trained on this machine.is it easy?
@VANESSASBLESSEDLIFE
Жыл бұрын
What a great tool
@CorneliusCreations
Жыл бұрын
It’s pretty fun!!
@TiffaniTube622
2 жыл бұрын
Thanks for this detailed video! I’m going to finally unbox mine tomorrow. I really appreciate you providing us with the settings you used, so helpful.
@CorneliusCreations
2 жыл бұрын
Glad you enjoyed it!
@christopherfigueroa3083
2 жыл бұрын
@@CorneliusCreations Can it do Cups that are not perfectly cilinder? like cups going from shorter in diameter bottom to bigger in diameter top?
@Messorem6
2 жыл бұрын
@@christopherfigueroa3083 It can, however, not with one image. You would have to do the top part then reset and do the bottom part.
@jakerazmataz852
Жыл бұрын
@@christopherfigueroa3083 I know this is an old comment, but go to 9.45 he gives a good demo. kzitem.info/news/bejne/1q6Nlq2hoodzdqw
@Betteruthanme1999
2 жыл бұрын
TY for the video. Your video is professionally done and you are very articulate and make it fun to watch. Keep up the great work. Big Fan.
@CorneliusCreations
2 жыл бұрын
Wow, thank you! This is one of the best compliments I could have received! Thank you!
@celiaquezada1524
Жыл бұрын
I can't my xtool d1 to hook up to the laserbox software.
@Partnerthedog
6 ай бұрын
@@CorneliusCreationsdoes it work on silver
@jspan323
2 жыл бұрын
Awesome video. Straight forward and very informative.
@CorneliusCreations
2 жыл бұрын
Glad you enjoyed it!
@millie7820
2 жыл бұрын
Awesome video , thank you for all the info can't wait to see more on how to use ImagR for pictures.
@carolinamoina6626
11 ай бұрын
This video is what I needed!!! Can't wait to try it out. Thank you so much for taking the time to showi us.
@CorneliusCreations
11 ай бұрын
You are so welcome!
@sthrnfrog60
3 ай бұрын
Interesting. A little research into prices however tells me the xtool engraver is about 1000x the price of other engravers.
@BuildDadBuild
2 жыл бұрын
Looking good, dude!
@CorneliusCreations
2 жыл бұрын
Thank you bro!
@pajtaj
2 жыл бұрын
I was on the fence for the whole laser idea. But after your video and the release of the 20 watt laser, I’m buying a 20w tomorrow!
@CorneliusCreations
2 жыл бұрын
So glad you enjoyed the video! Congrats!
@josephguernsey3110
2 жыл бұрын
It is such a good laser. A great tool to any creatives tool set!
@demonioblanco772
5 ай бұрын
thank you for sharing the knowledge and experence.. much appreciated
@FaceFabLLC
2 жыл бұрын
It’s always great to see a fellow creative champion & encourage others to make their mark! Maybe a small pun intended, lol…FANTASTIC videos & now I completely want one! Btw, by any chance do you have a separate photography channel?
@surgev9951
2 жыл бұрын
Your right! I'm buying one for sure now!!!! ha. Great video.
@CorneliusCreations
2 жыл бұрын
Glad you enjoyed the video. I love my laser a little more everyday!
@almaespinosa4505
Жыл бұрын
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre-establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
@millionmilerclub
Жыл бұрын
Wow great video, unfortunately I already bought it so I could not use the link but once I am ready for the additions I will. Thank you for the work yo've done.
@TheTomahawkRepublic
9 ай бұрын
Mske laser etching great again .
@ericeinsmann5559
Жыл бұрын
All this was done on a 10w? Nice! I just got a 10w from Comgrow and it's running well. I hope to get a 20w D1 Pro in Ironman Red one day..
@jeanninecannito3632
Жыл бұрын
I cant get this laser to do anything!!! Im sobbing as I type this. So much for xmas presents using this thing!
@CorneliusCreations
Жыл бұрын
What’s going on? Have you joined the FB xTool user group?
@missychan63
8 ай бұрын
I suggest you don't try selling anything with superheroes on it unless you want to be sued. 😉 Please don't think that because 4000 other Etsy shops are doing it that you're going to be lucky and not get caught. It's not worth losing everything you've worked so hard to build.
@mikeledee8786
2 жыл бұрын
Looking at the image for the tumbler on the screen it looked correct, whey did it engrave mirrored?
@williammorris2009
Жыл бұрын
I think he had the rotary rolling the wrong way?
@CourtJester1960
4 ай бұрын
I know nothing about engraving so stupid question, if once done you went over it again without moving the tile, would it engrave deeper?
@leonardmantooth8812
Жыл бұрын
Like the video and hope you come out with more for the d1 pro
@CorneliusCreations
Жыл бұрын
Thank you! I have one in the works!
@maddog19671967
7 ай бұрын
hi there im enjoying your videos alot but was wondering would it not be better to use water based paint as it would be easier to wash off?
@John-te4nu
10 ай бұрын
N you go over a second time for a deeper etch
@davidzion4123
2 жыл бұрын
I see lots of video they all say the same, not tell you how or what file you use to get into Laser Box.
@Traitorman..Proverbs26.11
2 жыл бұрын
The machine is compatible with different file formats, including SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, and many more. Both vector graphics and raster formats are supported.
@CockerDennis
8 күн бұрын
304 Bednar Glen
@madstrad123
4 ай бұрын
Thanks for the video. Why did you cover the Mason jar with caulk paint before engraving?
@commonsensepatriot9450
5 ай бұрын
Great video. Thank you.
@CorneliusCreations
5 ай бұрын
Glad you liked it!
@danieller9645
Жыл бұрын
Matt I also have a question about how to get my business started with the XTool laser. Any ideas? And how did you know that the hammer that you engraved would sell for about $40?
@timcornelius1978
2 жыл бұрын
Super cool!!! I wanna play with it!!!
@CorneliusCreations
2 жыл бұрын
It is a blast!
@melodyk.4612
Жыл бұрын
Hi, does anyone know how to make lasered creations on the xtool colored? It's advertised as being able to engrave 340+ colors but I can't find anything on how to make the colors appear...
@yavrismaylov5254
5 ай бұрын
Can we engrave portret on metal?
@Icefairy679
Жыл бұрын
Love your video! Newbie question, how do you know which surface requires a coat of paint/lacquer before etching?
@millionmilerclub
Жыл бұрын
I didn't see a mention on what you are using as an air filter
@mreinstein48
Жыл бұрын
I prefere the portable! : )
@larrydbenjamin5434
8 ай бұрын
Does anyone have or know where to get a chart for XTool 10watt Cutter, that shows basic power and speed settings. I'm burning up a lot of material trying to find just the right settings. If you have one can you put a link so us beginners have a plase to start
@msz51214
2 жыл бұрын
big job man
@AtinaEstrella
Жыл бұрын
Which would you recommend for a newbie to get best deal today on cyber Monday?
@Nangs666
7 ай бұрын
Can you engrave phones or electronics as well??
@HarrySatchelWhatsThatSmell
6 ай бұрын
Did ya' get a phone call from Disney lawyers? lol
@CorneliusCreations
6 ай бұрын
Nope, because I am not selling.
@thedevilsreject23
8 ай бұрын
I want to do coffee tables - how do I find one with a frame large enough to cover a decent sized wooden coffee table?
@romiejeffers8570
2 жыл бұрын
Looking for the test file. Great video.
@CorneliusCreations
2 жыл бұрын
Thank you, Here you go! drive.google.com/drive/folders/1LkYyh8dLm7YbRJGzmPsRWC3X2GrOk5oW?usp=sharing
@Monztuh
2 жыл бұрын
Wouldn't it be better to lower your speed and lower your power usage? The faster it moves the less time it has to engrave the hit area.
@All-Is-well489
Жыл бұрын
Do you recommend air ventilation or if I use in garage, I should not be worried? Do I need air assist also with this laser engraver? Thanks
@yolandaamos8836
6 ай бұрын
So you need a filter for this machine?
@CorneliusCreations
6 ай бұрын
Since it’s an open unit you can get an enclosure and smoke filter, but most people will use it in a garage or something where they don’t care about smoke
@vicguide4580
Жыл бұрын
How much
@jakerazmataz852
Жыл бұрын
Nice vid. Why don't you have a honeycomb bed? Also, the Atomstack air assist works and is much cheaper. 😉
@CorneliusCreations
Жыл бұрын
I have the honeycomb grid now haha. I’ll have to check that one out!
@MIMICHI09
Жыл бұрын
Thanks for your video, I'm thinking about get one of this laser machine. Could you tell me why did you paint the mason jar and them took the paint off?
@rocktilludrop1
3 ай бұрын
Hey newbie here. Where do I download the software bc xTool has their own creative software. Thanks!
@CorneliusCreations
3 ай бұрын
Right on xTools website. It is called XCS.
@jktrenching9181
Жыл бұрын
Can I ask where you got the mason jar from? I've been trying to find round jars but all I can find is the jars with beveled edges (more like an octagon shape)
@sleepindagarden2600
Жыл бұрын
I hesitate to order the D1 or Sculpfun S30 pro max 20W
@CorneliusCreations
Жыл бұрын
Why is that? I have had nothing but good luck from my xTool. Please note, that ANY laser company you will have good and bad ones. And most problems generally come from user error.
@JordanBurnett-mf4yn
7 ай бұрын
Which wattage laser was this D1? I couldn't find it anywhere in your description or the video.
@mtz3843
Жыл бұрын
but does this machine also do cnc work, if a person is going to pay 1,600.00 for this machine it should also do cnc work too, that a lot of money for a small machine?
@misupercooner
2 жыл бұрын
Does the orange gaurd act as an eye protection?
@TheSparkIdea
2 жыл бұрын
Can you use these machines on a 4x4 piece of wood?
2 жыл бұрын
What is the difference between the default blue laser and the xTool 21064nm infra red laser? They quote that the infra red laser is used to engrave metals and similar materials. But you can do that with the blue one too. Does it just work a lot better?
@TheSpineSplitter1990
2 жыл бұрын
I've had mine for about 4 months and I am very happy with it. I have the 5 watt version, the 10 watt seems like it does cut better so maybe soon I'll upgrade to the 20 watt module.
@CorneliusCreations
2 жыл бұрын
I’m glad you like it! It is such a cool little tool!
@dulcebellz3857
2 жыл бұрын
If ur only gonna cut then jump to 20w but to engrave the 10w is better but over all the 5w is best for engraving
@TheSpineSplitter1990
2 жыл бұрын
@@dulcebellz3857 I've had nothing but great results using the 5w for engraving, initially I wanted to cut 3mm delrin plastic for guitar picks and pickguards but unfortunately It didn't work. I see a few people selling their 10w module only since they have the 20w so I might just save some cash and get that..
@Blash1
2 жыл бұрын
@@TheSpineSplitter1990 was the 3mm too thick for the laser or what was the problem?
@TheSpineSplitter1990
2 жыл бұрын
@@Blash1 So I made the rookie mistake of trying to cut blue plastic sheets with the blue diode laser, it will cut it but it's such a hassle. I did cut red plastic and it was a lot faster. Blue and clear acrylic or plastic will have some issues cutting or engraving right. 3mm to 5mm wood is fine though.
@abedlalkhawaldeh580
Жыл бұрын
and if i live in a rent appartment , it has quite sound or noisy ?
@CorneliusCreations
Жыл бұрын
I think it is quiet enough to use in an apartment
@user-cu3xn4xj3i
Жыл бұрын
What prepping did you have to do for wood portraits?
@bcalbright728
Жыл бұрын
What did you do to get the picture of Ray Liotta to turn out well. I'm trying photos but I'm having a difficult getting them to work properly
@rgcrowman3188
Жыл бұрын
can you tell me if you can make a line width .013' and .050" deep
@KJ-hl1nt
2 жыл бұрын
Can you use this on tempered glass?
@qteeboy
Жыл бұрын
How did you detect the d1 on laserbox? It’s looking for the laser box machine when I installed laserbox and trying to detect the engraver
@mrman8856
Жыл бұрын
*Is this the same company that makes the scan tools?*
@confessorrios8618
2 жыл бұрын
What button I need to press to cut
@ChinoPatino86
Жыл бұрын
On the portrait did you change the grayscale? Or just steering you show on the video? Thank you for your tips!
@justayoutuber1906
2 жыл бұрын
Why do you mix paint thinner and water? Paint thinner should never go down your drain.
@Johnjohnthejohn
Жыл бұрын
You are right. I think you are supposed to drink your leftover paint thinner.
@mad2big466
Жыл бұрын
You're right. But I'm thinking that amount shouldn't hurt... as long as it's not an every day thing lol
@cxa011500
Жыл бұрын
How should you dispose of paint thinner? 🤔
@sethturner2352
Жыл бұрын
@@cxa011500you’re supposed to throw it in the ocean. Kind of like car batteries.
@jaygee9249
Жыл бұрын
Don't throw it over the neighbour fence either. Dispose responsibility
@alexl1976
Жыл бұрын
That speed and power template, I can no longer find on site. Can you share that file?
@dougward6669
8 ай бұрын
Juast got my D1 20 watt. Question. Can I adjust the thickness of the etching or am I limited to the width of the laser. I would like my outline of an item to be a little thicker.
@CorneliusCreations
8 ай бұрын
If I’m understanding correctly, what you are describing would depend on how thick the lines are on the file you are trying to engrave. If you would like thicker lines, you may need to find a similar file someone made that looks thicker.
@dougward6669
8 ай бұрын
@@CorneliusCreations thanks for the quick reply. I’m scoring the outline of an image so there are no lines.
@seanyboyc86
Жыл бұрын
Can this cut a few millimetres deep into Lino? Specifically lino used for Lino prints? Shopping for a machine that can and would love to know if this has been tested with Lino.
@TheSpandexcatcher
Жыл бұрын
Maybe I missed it but what wattage is this laser
@CorneliusCreations
Жыл бұрын
10W
@harisjaved1379
2 жыл бұрын
Thank you! I will probably buy this! Do you know if this can be used inside @120v? Thanks
@CorneliusCreations
2 жыл бұрын
You will love it! I think it can. You can do a support chat to make sure!
@Fishbone4u
2 жыл бұрын
Where do you source your slate tiles? Brad/model/link of your dust collector??
@jmoney4451
2 жыл бұрын
This was great man! What were the settings you honed in to get the Ray Liotta image??
@maggieotten9834
Жыл бұрын
Can this be used to engrave biothane?
@edgarshoe
Жыл бұрын
Is Makeblock the same as Xtool?
@alanm3438
Жыл бұрын
I was a laser operator in a small steel factory for many years. At home I had a CNC plasma cutter and have made tons of art projects with it. I am interested in this product but my garage is not heated. Would the below freezing temps wreck the machine? Thanks for the video.
@leanewman
Жыл бұрын
Oh hadn’t thought of that. Would love to know the same
@glennkitchen8867
Жыл бұрын
Great Vid!! I get mine tomorrow.... quick question... (I'm a rookie) why do you paint the tiles & jar pre laser??
@williammorris2009
Жыл бұрын
So the laser will work on transparent or reflective surfaces
@michaelmonteforte787
2 жыл бұрын
I am struggling to learn lightburn maybe I should try laserbox instead. One problem I am having is I think because there are to limit switches on the d1 it seems to slam into the outer edges and makes a awful noise when that happens. My question is how do I stop that from happening. Appreciate your encouraging video
@BitSmythe
Жыл бұрын
Home first. Then learn about where to start the job; current position vs exact dimensions. Also be aware of start location (the 9 dot grid). If you’re starting at top left and you’re engraving “selected items” they must be at that edge of your on screen project. In other words, if you have vertically, A, B, C and are only engraving B and C, it will skip the location of A even though you’re not outputting it. Also if you have the Blue laser head (with red crosshairs) make sure the Offset is on, for the IR head, it should be off. There are some great tutorials available. www.youtube.com/@TheLouisianaHobbyGuy this guy is good, but has the remarkable ability to take a strong five minute video and stretch it out to twenty. Loves to hear himself talk, but has lots of good info.
@shellyjorgensen2441
2 жыл бұрын
I'm doing a coated metal tumbler and trying to get the right settings for it
@CorneliusCreations
2 жыл бұрын
If you are using the xTool try the settings in this video :)
@dogfamily3115
Жыл бұрын
what kind of table do you have? look great and sturdy
@CorneliusCreations
Жыл бұрын
It is a Husky table from Home Depot. I highly recommend them! They are amazing!
@taothaelasutt90
Жыл бұрын
Hi, does the 20W laser module be able to engrave silver?
@kimbutler4661
Жыл бұрын
Great video, thanks. Can you link for me where to find the portable air filter that you have?
@CorneliusCreations
Жыл бұрын
That is the PSI woodworking brand on Amazon. They stay sold out a lot!
@Kmo223
Жыл бұрын
Do you like laserbox software better than xtool creative? I’m also trying to get lightburn to work with my xtool d1pro 20w.
@Piginhatwoodcrafts
2 жыл бұрын
Brilliant video with great tips thanks 👍 I can't see the link for the tile test pattern mentioned in the video however 🥺
@CorneliusCreations
2 жыл бұрын
Thank you! Sorry for the delay, here you go! drive.google.com/drive/folders/1LkYyh8dLm7YbRJGzmPsRWC3X2GrOk5oW?usp=sharing
@ektapurohit3777
Жыл бұрын
Awesome video, quite informative. I am now with this machine. I Can’t open this file. Please help
@SmithLaurel
21 күн бұрын
35320 Schulist Route
@rileycrain5784
10 ай бұрын
Does anybody have this laser and also has a mopa 60w or similar? Is the price jump worth the mopa?
@GINZO4849
2 жыл бұрын
Great video, but your affiliate links don't work. Get a Page not found message from xTool. It would be interesting to know how long it takes for machine to do a tumbler and the reason for the paint on the mason jar and what paint was it you removed from the dog photo. Lots of little mysteries in the video but you are the best! Found you this morning and subscribed half way through.
@CorneliusCreations
2 жыл бұрын
So happy to hear you enjoyed the video, Bill! Thank you for letting me know about the links. They are updated now!
@SilasAnastasia
12 күн бұрын
42393 Berenice Fall
@johnscott6392
Жыл бұрын
What type of air filter are you using with your laser
@CorneliusCreations
Жыл бұрын
None right now, but suppose to be getting an xTool one in soon.
@johnithanbush9153
4 ай бұрын
Does the program cost anything or is it free upon purchase?
Пікірлер: 290