happy days---looked simple and actually was---- first tiler tried to tell me it was a big job and quoted me £300 for labour for mat laying on own in kitchen which is about 6ft by 7 ft very small-i saw your video-contacted another guy and he said do it yourself which i did taking my time electrican charged £40-i supplied stuff-great video thanks again
@thebigquestion
4 жыл бұрын
Craig doesn't miss neck day.
@DonDnoUK
7 жыл бұрын
Omg Craig, I can't believe I've found you haha (you're a legend), I was just looking at tutorials for my first home, this is brilliant (well presented); I've subscribed.
@MrandMrsDIY
5 жыл бұрын
Many thanks Don Don
@MrDIYCraigPhillips
4 жыл бұрын
I'm glad to hear it, thanks Don
@K666_ANB
3 жыл бұрын
No fuc*king way. I’m here searching for underfloor heating and I find “the craig” BO SELECTA. Man I feel 14 again hearing this voice 😂😂
@aliataya5675
4 жыл бұрын
Brilliant video, well informative quick and simple, thanks a lot mate 👍🏼
@MrDIYCraigPhillips
4 жыл бұрын
Thank you, were glad to be able to help
@SeaJayBelfast
4 жыл бұрын
Lol always great to see the Craig appear
@binghamguevara6814
2 жыл бұрын
Craig: the Perfect Man
@citroenfil
6 жыл бұрын
Cheers for this video. I’m installing some underfloor heating in my bathroom and wasn’t sure about thermocouple location. You’ve explained it well.👍
@MrandMrsDIY
5 жыл бұрын
Cheers
@MrDIYCraigPhillips
4 жыл бұрын
Perfect, we're glad to be able to help you.
@martathoffmann
4 жыл бұрын
just what I was looking for! Thank you!
@MrDIYCraigPhillips
4 жыл бұрын
Your very welcome Marta, were glad to be able to help
@adamwright5306
4 жыл бұрын
Never put a sensor in like that. Should be in a tube so i can be removed if it stops working
@MrDIYCraigPhillips
4 жыл бұрын
Some manufactories supply a tube and recommend fitting the sensor in the tube, but there are other that don't, it's a very valued point to make this thank you, everyone should check the instructions first.
@ZedJay88
6 жыл бұрын
Yes Craig! Lol
@MrDIYCraigPhillips
4 жыл бұрын
Cheers
@alexanderchuyko4889
5 жыл бұрын
Beautiful video! I`m interesting with installing the same on my ensuite bathroom. It`s 1,8 x 1.8 m (may be I have to exclude an under toilet pan area). However... it has a trap at the centre of the floor, so... no self leveling mixtures can be used... It needs for a slightly sloped to the centre screed. In this case the thickness of adhesive between heating element and tiles will be uneven. Is that acceptable? Is this set suitable for such floor configuration, please? Thank you.
@TileMountain1
5 жыл бұрын
Hi Alexander - thanks for your comment. So long as there wasn't a huge difference in the thickness of the adhesive (1-3mm max) then it shouldn't be a problem. Any more than that however and you may find that some of the tiles get hotter than others when the underfloor heating is in use. Hope this helps. Tile Mountain
@georgianwindow
5 жыл бұрын
What do you need to buy to fix to electics
@MrDIYCraigPhillips
4 жыл бұрын
Yes electricity will need to be supplied to the unit, please only use a qualified electrician to do the main connections. ( please to do not attempt to content to the mains yourself if your not qualified )
@wecarewecare3802
4 жыл бұрын
Hi, Could you use any thermostat for the matt. I purchased a Dass electric mat but didn't realise it came with no thermostat. I am a bit stuck. Thank you
@TileMountain1
4 жыл бұрын
Hi there - thanks for your comment. We would usually advise contacting the manufacturer of the mats to check their advice in this regard. However, generally speaking, you can use any appropriate thermostat with most underfloor heating products. You can check out our range of thermostats here: www.tilemountain.co.uk/thermostats.html Please do check with your heating mat supplier before purchasing though! Hope this helps! Tile Mountain
@giorgiparkaia4888
4 жыл бұрын
Good day, is it possible to do all this as you do on the wall on the surface of the tile and then glue the mirror so that the room was warm at the same time and there was no steam
@shirleycarter9210
4 жыл бұрын
🤣🤣
@MrDIYCraigPhillips
4 жыл бұрын
To be honest with you, I've never tried this so I wouldn't recommend attempting it, however don't rule it out maybe contact the manufacture to get there advise.
@giorgiparkaia4888
4 жыл бұрын
@@shirleycarter9210 is this a smiley your answer?
@plum_stone6617
4 жыл бұрын
Hi - can you tile straight onto the mesh?? Thank you
@TileMountain1
4 жыл бұрын
Hi Plum_Stone - thanks for your comment. Yes - that's exactly what you do. Ensure you level the floor (if needed), then lay your heating mats, connect them up, then place your tile adhesive on top and finally lay the tiles. For more info about measuring up and panning underfloor heating, check out our article here: www.tilemountain.co.uk/blog/how-to-measure-for-underfloor-heating/ Hope this helps!
@LastEmpireOfMusic
6 жыл бұрын
sad that you dont continue.... and the next video is showing tiling on wood, not on floor heating.... so how to tile on floor heating mesh...
@TileMountain1
5 жыл бұрын
Hi Dr X - thanks for your comment. We're glad you like our videos - don't be sad that we didn't continue though as we'll be back with a batch of new videos that might well cover your enquiry very soon indeed! Keep checking back to the Tile Mountain KZitem channel, or better still subscribe to ensure you don't miss an episode! Tile Mountain
@MrandMrsDIY
5 жыл бұрын
The new batch is out now @@TileMountain1
@gsb5859
4 жыл бұрын
Is this a cheaper option than gas central heating?
Пікірлер: 36