I've learned a lot from guys with tape covering a finger injury, and I've been that guy many times.
@jamesnorris998
3 жыл бұрын
The Ole mandaid approach.. Electrical tape and a rag
@johnny5fingers0966
Жыл бұрын
Take a self tapping screw and put it through the lid on your paint and leave it there. When you go to use the paint shake the piss out of it then afterward remove the screw. Turn it upside down and give it a little squeeze into a Dixie cup. Continue until you have what you want. Put the screw back in and leave it. Paint wont dry out and you never have that skin on the paint. Plus no mess from pouring and much less waste. The paint around the screw forms a seal.
@daryncalton8765
6 жыл бұрын
I used this method on my Silverado and it worked great. Love the stepside. I've got a 63 myself
@1rustytruck130
6 жыл бұрын
good stuff, just learned how to do my truck, thanks BBG!! appreciate it.
@tenlittleindians
6 жыл бұрын
My grandfather would have painted that by hand in less time. He had an old back seat out of a Nash Rambler he kept just for painting on doors so he wouldn't have to sit on the ground. When he retired in the 70's he took his sign painting kit and three small primary colors of paint and hit the road in his camper. If he needed gas or something he would barter with his painter skills. Sometimes something simple like the store hours painted on the inside of the front door glass. He could reverse paint just as fast. I was always amazed how easy he made it look. A couple of bucks worth of paint got him to the entire lower 48 states.
@BrokeBastardGarage
6 жыл бұрын
That's Awesome.. I have watched a lot of sign painters work. And its amazing how fast a seasoned painter can create perfect lettering.
@snoopu2601
6 жыл бұрын
ten littleindians Mon that pretty great I like that, that's how it was done in the old days people would trade work and skills for something my Pop's was that way he was a mechanic he didn't necessarily need the money all time he would trade skills if someone worked for a cement company he would trade to pour cement somewhere in the yard, he even traded for a black to parking lot that this guy used all his matrials after work and small tractor to pave the lot. He rebuilt a engine so it was a far trade. Yes sire I like that idea money is just a promise note anyways
@gadiantonx8474
5 жыл бұрын
skills like that dont exist any more
@johndowe7003
5 жыл бұрын
not all of us are great artists, but want that look. i personally draw/write like 3 year old so i wouldnt want that on my doors lol. Not all of use are talented in artistry.
@snoopu2601
5 жыл бұрын
john dowe very true stencils is good draw it all out on a table then tape it on air brushing use lots of stencils for flames to get the diffrent angeles hay do what you gotta do to get the job done.
@thewiremanbig
5 жыл бұрын
Awesome technique. Thank you for sharing
@Tarzanmel68
5 жыл бұрын
thanks brother for the tips, been contemplating doing my two trucks, this helps me get motivated
@AndysDogHouse
6 жыл бұрын
Great idea. When I finish my truck I am going to have some fun with it ( I hope many tours). Then I want to paint my son's shop name on it and give the truck to him and my Grandsons to use for their shop truck.
@jonathangodbout6645
5 жыл бұрын
Hey man I love this video this is exactly what I'm doing now to my shop truck. I already got my stencil negatives back from the sign shop! I'll start painting my letters within a couple of days
@olmoe1167
6 жыл бұрын
Looks good, man....Thanks for the Ideas and insight on how you do it your way....
@larrysullivan6536
5 жыл бұрын
Brilliant love it well done buddy and well explained x Larry Sullivan in London x
@williambrown6721
5 жыл бұрын
Great!! Job my brother!!.....I have a 1978 C 10 that I'm rating it out.....after watching your video, I was blown away by to see how you done the lettering. My brother owns a cronhole shop! he does some of the best boards in the U S...he creates his stickers, I'm going to try too get him to put something like that on the side of my truck!...maybe if he would let me,I'll advertise his business...He'll help me put that on my truck....thanks for showing me and a lot of other people who would love to do something like this but didn't know where to start!.....Great! Job my brother..
@BrokeBastardGarage
5 жыл бұрын
send me pics when your done!! brokebastardgarage@gmail.com
@josemendez-ih2ku
5 жыл бұрын
Thanks for the tip chief. Shout out from Moorpark Califas. I feel more confident hooking up a truck for a job like that now.. Thanks.
@tarmac245
5 жыл бұрын
Thank you. Great technique. Well made video.
@joellekarma
5 жыл бұрын
I love the name of your garage. That is so cool Thanks for sharing.
@jmelendez740il
6 жыл бұрын
Awesome job. Thank you for that big idea. A big hello from Ocala Florida
@BrokeBastardGarage
6 жыл бұрын
Thanks man. And thanks for watching
@mikehill5301
5 жыл бұрын
Well that was to the point and simple.Thank God .There are few people left that have a clue about how to combine the technologys and create a work of art that will endure road salts or whatever.great video and the ska music wasn't bad either
@lordmatthews
5 жыл бұрын
Awesome video! Thanks for sharing!
@rockypergin2216
3 жыл бұрын
Thanks for making it look easy! Super cool
@markloganvw
4 жыл бұрын
Thanks so much for a great video very helpful.
@jacobmarble6899
Жыл бұрын
This video helped me out tremendously. Thanks man!
@THEWARMANN
5 жыл бұрын
You should title this "How to take money out of pockets from traditional sign painters!" lol Love yer work man, but yer killin the game for those who do this for a living by making videos like this! -Detroit Sign Painters
@Timetravel1111
5 жыл бұрын
Zak Warmann how do I find one near me? Do you come to Minneapolis.
@oldrover3007
3 жыл бұрын
Great Video , Very informative ,I’m going to give it a shot. Thanks again
@woody5109
3 жыл бұрын
Love this guy, he’s real
@graminizer
3 жыл бұрын
Just did this.....worked great....thanks!
@vinnlespalatrio7113
6 жыл бұрын
WOW What a big help!!!!!!! Great video!!!!!!!
@bstaustralia346
3 жыл бұрын
Great Stuff mate, thanks for the tutorial. Going to do my F100 now. cheers from Australia
@agoodballet
4 жыл бұрын
Been rusting parts for years with 10:1 peroxide, vinegar and water with salt. I like to clear over it to make it new lol. Good shot man, awesome how to.
@joeyfarkel479
3 ай бұрын
GREAT JOB. YOU'RE A WONDERFULL TEACHER. THANKS
@christophermontroy642
6 жыл бұрын
I like it looks good. I have a 72 c10 just picked it up.
@newsnowminnesota3045
5 жыл бұрын
I love the electricians tape bandage. I've done that *SO MANY* times. LOL
@c50ge
4 жыл бұрын
News Now Minnesota THAT BANDAGE IS CALLED A “SPARKY”
@luebkeb
4 жыл бұрын
That's called a man-daid.
@kanjoracer4914
5 жыл бұрын
Great Work! and Soundgarden in the back ground aswell!
@pablopickasso4098
5 жыл бұрын
Grand job indeed! met the BB at tucson car show, real nice guy too!
@eribertoacedo9505
5 жыл бұрын
Hey BBG thanks for the video you're good at this you know great ideas my friend has a Rat Rod going to show him this video probably end up doing the same thing great job, your friends bug that things awesome it just came along for the ride will be watching🕶
@arfonia
5 жыл бұрын
Great vid...Top job!.....Skully UK.
@desertsnakezerke1042
4 жыл бұрын
Very cool, great money saver. Thanks
@rcwarfield3429
6 жыл бұрын
Fine job, looks good.
@andrewfield272
5 жыл бұрын
Thank you for sharing this tip 😉
@todd6076
3 жыл бұрын
Nice work! Looks great.
@dr.astro.hutchins
4 жыл бұрын
Great advice in this movie ! Thanks !!
@timothysmith5769
5 жыл бұрын
If you want your lettering to look aged with the first application of paint, try applying the paint with a sponge by daubing it on. It looks great.
@offhandacoustic
2 жыл бұрын
This is why I come to the comments. Awesome idea.
@tihzho
5 жыл бұрын
The kerning between the "T" and the "A" is off, they need to be less space between them. You needed to distress the lettering while the mask was still on and the paint still tacky. By distressing the lettering after the mask was removed you disturbed the door's patina. A better result would be to thin out the paint so its a bit transparent and use a lettering brush to paint in the letter strokes. The stencil will ensure the letter shapes are correct. The semi transparent brush strokes overlapping gives the effect of sun bleaching. That being said having the letters on rusted metal makes no sense as they would have been originally been on the original car paint. Therefore to have old oxidized car paint with the lettering makes sense you can then rub away the lettering and the car paint together and add the rust patina. Yes?
@jim778
5 жыл бұрын
Looks GOOD !!
@oldrover3007
5 жыл бұрын
Nice Job, Thanks I might give it a try 👍
@NorthEastMechanic
4 ай бұрын
Awesome idea! Looks dope! 🤘
@travelingkaspersworld4096
5 жыл бұрын
cool idea. You make it all look easy
@bwsgarage
4 жыл бұрын
Just subscribed, cool video and I learned something, for that I thank you. I am a little bit aways, but will use this technique to letter the 1955 gasser i am building over at my garage. ✌
@danelobe2524
6 жыл бұрын
Awesome !! done like a true broke bastard !!! Two thumbs up brotha'
@rexjonez2918
4 жыл бұрын
Hell yeah bro! Thanks. Nice truck too
@earthlytag1071
5 жыл бұрын
I liked the bare metal with the blue/red swirls of paint look much better for some reason.
@BrokeBastardGarage
5 жыл бұрын
Earthly Tag yah I really thought about leaving it that way
@rhomotor
2 жыл бұрын
Thanks for the info. That is a great idea.
@j.c.smithprojects
6 жыл бұрын
that worked out very well. looks great...have you ever tried to ad a second color for a dimensional effect?
@BrokeBastardGarage
6 жыл бұрын
yes works the same way. If you want and shadow effect you can do two stencils one for shadow color one for main color
@rezasadat4356
Жыл бұрын
THANK YOU MAESTRO!
@AddictedToJeepsCom
5 жыл бұрын
Nicely done! Liked & subscribed!
@ronbusa3735
5 жыл бұрын
Awesome work looking good
@falconeddie1393
6 жыл бұрын
Great idea man.
@johnnybsbasketcaseprojects3835
6 жыл бұрын
Great how to thanks for video
@darrylbrown5459
4 жыл бұрын
Great informative tutorials
@tomkeogh8438
5 жыл бұрын
truck looks killer good job
@pbmachines972
6 жыл бұрын
dude awesome truck big big Chevy fan
@ledsled68
6 жыл бұрын
Looks good bro.... Enjoyed the vid.. ✌️
@franciscocontreras6889
5 жыл бұрын
Great Work, Makes Your Truck appear more bulky and Sporty
@kratos1667
5 жыл бұрын
Awesome channel brother. Keep on living that Rat life 🤘
@daveallen6354
3 жыл бұрын
very helpful ,great guy
@judichristopher4604
5 жыл бұрын
"WOW" Beautiful work... So Smart!!!! This is an EXCELLENT VIDEO... Thank you for sharing
@Timetravel1111
5 жыл бұрын
Judi Christopher Judi what car do you have? Does yours have paint?
@judichristopher4604
5 жыл бұрын
@@Timetravel1111 No... (laughing I have a '95 Cadillac)... I "Flip" RVs, Travel Trailers, etc... I used to do Sign Graphics... but they never taught us this... Wished I had known how you did this ... I have a 1972 Aristocrat Travel Trailer I'm going to be refurbishing... This video is so GOOD... Thank you for sharing this...
@judichristopher4604
5 жыл бұрын
@@Timetravel1111 OHHHH Neither one of my RVs I'm working on has paint. The 1985 Class A or the 1972 travel trailer... I will hand paint them each... (Yes... hand paint them).
@Timetravel1111
5 жыл бұрын
Get it painted baby!!
@Timetravel1111
5 жыл бұрын
Judi that’s so interesting. So old RVs and airstreams? Where you live? I’m in Minneapolis. My friend and I want to but a retro trailer.
@billybazillion641
4 жыл бұрын
Like the truck! And the letters!
@wendyvic4046
2 жыл бұрын
Love it!
@bigjohnnywolf7500
3 жыл бұрын
@ 11:56 you were sounding like the Great Bob Ross.. Thanks for the tips. It's made doing my own projects much more fun and saved money...
@sbjennings99
5 жыл бұрын
Awesome informational educational video experience Y'alls
@greatdaneacdc
4 жыл бұрын
This works great for larger decals Square your decal backing for points of reference . Put measuring marks on door. Spray door and decal with water. Slide decal around to lineup. Use new bondo spreader to remove water and poke air bubbles with pin
@lamvespa1
6 жыл бұрын
Superb . 😎✊🏼
@HenryDiaz-ty2om
Жыл бұрын
Excellent idea.
@jomsvikinger
6 жыл бұрын
Good job and really easy. Even for me ;-).
@davidspin5353
3 жыл бұрын
Im liking this, im liking this a lot!
@Yahoomediaclub
5 жыл бұрын
Great job buddy...⭐️⭐️⭐️⭐️⭐️ Cool Truck ⭐️🛠☠️🎸🗜🔧
@barryphilrush719
3 жыл бұрын
Nice work 👏!!!!
@joelvelez5524
4 жыл бұрын
Love it bro.
@drt6680
6 жыл бұрын
Nice! Might have to give that a go on my big truck mud rat.
@TREMVan
5 жыл бұрын
nice work Brother... gotta do some for my bus...
@grannylow7073
4 жыл бұрын
Great work , thinking of doing that to my truck
@anthonybonnelle786
5 жыл бұрын
Great video I subscribed
@Brooklyn_Powers
4 жыл бұрын
Very cool!
@672egalaxie6
6 жыл бұрын
Fantastic job! Looking at a couple of different vinyl cutters on ebay, with software etc, What machine do you have?
@BrokeBastardGarage
6 жыл бұрын
I use a US CUTTER and the software is SURE CUTS PRO
@Buckswoodshop
6 жыл бұрын
Excellent!
@openeyes3195
5 жыл бұрын
Love that style. I got a 64 out in nyc . Getting it graffiti bomb
@BrokeBastardGarage
5 жыл бұрын
open eye's send pics when you get it done
@openeyes3195
5 жыл бұрын
@@BrokeBastardGarage 10/4 that
@mrmomjoe8019
5 жыл бұрын
Looks like some rv paint mask.nice video 👍
@travislawson1185
5 жыл бұрын
Not sure if you know this as I didn't want to read through all 118 comments but if you want to "lock in " the rust patina and slightly darken it, wipe the whole body down with a product called Penetrol. Its an oil based paint additive conditioner to help the paint flow and level when brushed on but for some reason it is also a steel protector and will lock in rust, or on bare metal will protect it from corrosion for years.
@jameshancock1291
4 жыл бұрын
Diggin the soundtrack... Offspring!!
@nigelcarren
5 жыл бұрын
Hey Mate, from one Metal-Botherer to another! I just wanted to say Happy New Year, I like your swagger, consider me subscribed. Best wishes from an English guy making armour in a French forest. 🏆
@lane8932
6 жыл бұрын
Beautiful truck !!!
@BrokeBastardGarage
6 жыл бұрын
Rusty Irons thanks and thanks for watching
@jonathangodbout6645
5 жыл бұрын
Awesome I can't wait to do that to my Silverado shop truck I am bldg!thanks man you just showed me a super easier way to do it!
@davethedentside
3 жыл бұрын
Nice job! how would you recommend to age the letters, if there is an intact but patina original paint underneath? I want to make sure not to sand to bare metal...
@dwreckbaker6382
6 жыл бұрын
Damn bro that is sweet ride, I got 62 step with black steelies but mine is orange & black with Harley Davidson on doors. Im stealing your rust idea for a subscription to your channel
@brianonthego
4 жыл бұрын
Nice work.
@donaldbelobraydic9996
4 жыл бұрын
That was cool.
@Timetravel1111
5 жыл бұрын
My sound isn’t on, but I really dig your vibe man. I am getting my 1941 Chevy special DeLuxe this week. It’s going to take awhile to have the funds to paint it. This is a great idea; as it has a running motor. Where you live?
@MrAllinclubs
6 жыл бұрын
Thanks for the tips, How long do you usually let the paint cure?
@BrokeBastardGarage
6 жыл бұрын
I normally let it set for 4 plus hours before I sand them
Пікірлер: 363